PA single wall patch's - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

warbucket · 05-13-2013, 12:41 PM

I have a 72 CST Chevy, V8, AC. Thanks Ray.

**71blksuper4x4** · 05-13-2013, 06:50 PM

What do want for the shifters. I think I'll pass on the black door panels to a great guy down south of me. How bad is the steering wheel? Trevor
Posted via Mobile Device

**natec/10** · 05-13-2013, 06:51 PM

Jdubs71
I dont know what part your talking about the rubber? or ? do you have a pic of what your looking for

warbucket
I'll look through what i have

**natec/10** · 05-13-2013, 06:54 PM

71blksuper4x4

I actually just sold the transfer case one locally I think i have another i do have the tranny shifter I'll take some pics and send them to you ok

**71blksuper4x4** · 05-13-2013, 06:55 PM

Sounds good...Trevor
Posted via Mobile Device

**29od1** · 05-13-2013, 07:05 PM

Quote:

Originally Posted by 71blksuper4x4

What do want for the shifters. I think I'll pass on the black door panels to a great guy down south of me. How bad is the steering wheel? Trevor
Posted via Mobile Device

Thanks buddy!

How much are you asking for the door panels?

Jdubs71 · 05-13-2013, 10:37 PM

Quote:

Originally Posted by natec/10

Jdubs71
I dont know what part your talking about the rubber? or ? do you have a pic of what your looking for

warbucket
I'll look through what i have

Here is a pic of them. Took a box of stuff to the powder coat shop and they powder coated them. They're plastic... My mistake I guess.
Posted via Mobile Device

**natec/10** · 05-14-2013, 07:02 AM

Jdubs71
your 2 days late I actually ran the saw right threw them SORRY

29od1
I'm thinking like 175 plus shipping or I'll hang onto them

71blksuper4x4
heres some pics of the shifter wheel and i decided to sell the tach dash 300 plus shipping the shifter make me offer

warbucket
I got the ac harness out last night no cuts in it now i need to look threw the rest for the other 2 give me a day or so ok

thanks guys
Ray

Jdubs71 · 05-14-2013, 09:13 AM

No worries. Thanks for looking.
Posted via Mobile Device

**71blksuper4x4** · 05-14-2013, 05:19 PM

Nate, how much for the wheel? I will wait to hear from ya on the wheel before offering as might be able to bundle. Trevor
Posted via Mobile Device

warbucket · 05-14-2013, 05:25 PM

Thanks Ray, no rush. also while your at it, how is the harness to the tail lights? mainly the pig tail wires to the tail lights . My blazer had a plow at one time and a receiver so most wires were tapped into. Also I would do $300. on the tach dash if 71blksuper4x4 passes.

**natec/10** · 05-16-2013, 12:19 AM

71blksuper4x4

I'm open to a offer on the shifter and the steering wheel you did see where it is cracked also I'm pretty sure i have another chrome tansfer case shifter just need to look threw my parts room

warbucket

do you need the plug to the taillights complete? if so i know i dont have one I may have the plug I know i have the harness from the back to the firewall also i do have another tach dash but it does have a air pressue gauge also

**71blksuper4x4** · 05-16-2013, 11:08 AM

Take $150 shipped for shifters and wheel?? Trevor
Posted via Mobile Device

warbucket · 05-16-2013, 08:16 PM

warbucket

do you need the plug to the taillights complete? if so i know i dont have one I may have the plug I know i have the harness from the back to the firewall also i do have another tach dash but it does have a air pressue gauge also[/QUOTE]

I went through the box of wires I have and I do have the 4 wire harness that goes from the dash too the rear along the frame rail to the gas tank but I don't have the conector harness too the tail lights, thats the one I need. Can you post up some pics of your other tach dash? Thank, John

**natec/10** · 05-18-2013, 12:31 AM

71blksuper4x4

right nw the transfer case shifter is evading me

warbucket

pics of the tach dash with air pressure the bezel is junk other than that no other damage

**Tom Vogel** · 05-18-2013, 10:05 AM

Quote:

Originally Posted by 68panelman

How's the windsheild frame?

sorry, can't help it.
Posted via Mobile Device

1972Blaze · 06-09-2013, 10:44 PM

Do you have the angle brackets that would have held the rear interior side panels on at the rear?

Thanks.
Posted via Mobile Device

**natec/10** · 06-12-2013, 04:17 AM

1972Blaze
I do have them all I dont want to break up all the rear mounting brackets the ones you want you know are really just a bent peice of sheet metal if you want i can get you the measurements and a pic if you want to make some
thanks
Ray

1972Blaze · 06-12-2013, 01:45 PM

Thanks for the offer . I actually have one I can use to replicate the other side, but I like original parts. How much for all of the pieces?

Larry

Quote:

Originally Posted by natec/10

1972Blaze
I do have them all I dont want to break up all the rear mounting brackets the ones you want you know are really just a bent peice of sheet metal if you want i can get you the measurements and a pic if you want to make some
thanks
Ray

Effeckt · 06-14-2013, 02:54 AM

I am interested in the section that attaches to the windshield if Turp didn't get it. Same front 6-8" or so.
Posted via Mobile Device

cudaman · 06-14-2013, 07:03 AM

Are there any rear seat belts? Rear seat hold downs and hardware.

turp mcspray · 06-14-2013, 09:55 AM

Quote:

Originally Posted by Effeckt

I am interested in the section that attaches to the windshield if Turp didn't get it. Same front 6-8" or so.
Posted via Mobile Device

I'm still interested, just waiting to hear back.

jaros44sr · 06-14-2013, 11:35 PM

How much did you want for the windshield frame......

**natec/10** · 06-17-2013, 12:08 AM

1972Blaze
here is a pic of what i got the top angle braket has some rust on it and the bottom one is just bent sheet metal $85.00 shipped

turp and Effeckt
2 pics of what i got my sawzall was drunk that day
$50.00 plus shipping
I also have a double wall roof no hatch $50.00 its in another post of mine

jaros44sr
I have no Idea make a good fair offer on it and its yours if you want some more pics let me know

I also have the dome lights for a single wall top from the fuse box back no cuts $100.00plus shipping

cudaman · 06-17-2013, 07:29 AM

natec/10: Ill take the dome light harness. Pm info.

05-13-2013, 12:41 PM	#26
warbucket Registered User Join Date: Mar 2011 Location: Havertown Pa Posts: 392	Re: single wall patch's I have a 72 CST Chevy, V8, AC. Thanks Ray.

05-13-2013, 06:50 PM	#27
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,151	Re: single wall patch's What do want for the shifters. I think I'll pass on the black door panels to a great guy down south of me. How bad is the steering wheel? Trevor Posted via Mobile Device __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

05-13-2013, 06:51 PM	#28
natec/10 Senior Member Join Date: Jan 2007 Location: Pittsburgh Posts: 242	Re: single wall patch's Jdubs71 I dont know what part your talking about the rubber? or ? do you have a pic of what your looking for warbucket I'll look through what i have

05-13-2013, 06:54 PM	#29
natec/10 Senior Member Join Date: Jan 2007 Location: Pittsburgh Posts: 242	Re: single wall patch's 71blksuper4x4 I actually just sold the transfer case one locally I think i have another i do have the tranny shifter I'll take some pics and send them to you ok

05-13-2013, 06:55 PM	#30
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,151	Re: single wall patch's Sounds good...Trevor Posted via Mobile Device __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

05-14-2013, 07:02 AM	#33
natec/10 Senior Member Join Date: Jan 2007 Location: Pittsburgh Posts: 242	Re: single wall patch's Jdubs71 your 2 days late I actually ran the saw right threw them SORRY 29od1 I'm thinking like 175 plus shipping or I'll hang onto them 71blksuper4x4 heres some pics of the shifter wheel and i decided to sell the tach dash 300 plus shipping the shifter make me offer warbucket I got the ac harness out last night no cuts in it now i need to look threw the rest for the other 2 give me a day or so ok thanks guys Ray Attached Images

05-14-2013, 09:13 AM	#34
Jdubs71 Registered User Join Date: May 2012 Location: Sanger, CA Posts: 415	Re: single wall patch's No worries. Thanks for looking. Posted via Mobile Device __________________ 71 K5, AC/Tilt, 4" lift 33" tires 5.3L/4L60E/NP 205 (Under Construction) 05 Dodge 2500 4x4 5.9 Cummins (Daily driver) "Common sense is not so common" My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=555879

05-14-2013, 05:19 PM	#35
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,151	Re: single wall patch's Nate, how much for the wheel? I will wait to hear from ya on the wheel before offering as might be able to bundle. Trevor Posted via Mobile Device __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

05-14-2013, 05:25 PM	#36
warbucket Registered User Join Date: Mar 2011 Location: Havertown Pa Posts: 392	Re: single wall patch's Thanks Ray, no rush. also while your at it, how is the harness to the tail lights? mainly the pig tail wires to the tail lights . My blazer had a plow at one time and a receiver so most wires were tapped into. Also I would do $300. on the tach dash if 71blksuper4x4 passes.

05-16-2013, 12:19 AM	#37
natec/10 Senior Member Join Date: Jan 2007 Location: Pittsburgh Posts: 242	Re: single wall patch's 71blksuper4x4 I'm open to a offer on the shifter and the steering wheel you did see where it is cracked also I'm pretty sure i have another chrome tansfer case shifter just need to look threw my parts room warbucket do you need the plug to the taillights complete? if so i know i dont have one I may have the plug I know i have the harness from the back to the firewall also i do have another tach dash but it does have a air pressue gauge also

05-16-2013, 11:08 AM	#38
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,151	Re: single wall patch's Take $150 shipped for shifters and wheel?? Trevor Posted via Mobile Device __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

05-16-2013, 08:16 PM	#39
warbucket Registered User Join Date: Mar 2011 Location: Havertown Pa Posts: 392	Re: single wall patch's warbucket do you need the plug to the taillights complete? if so i know i dont have one I may have the plug I know i have the harness from the back to the firewall also i do have another tach dash but it does have a air pressue gauge also[/QUOTE] I went through the box of wires I have and I do have the 4 wire harness that goes from the dash too the rear along the frame rail to the gas tank but I don't have the conector harness too the tail lights, thats the one I need. Can you post up some pics of your other tach dash? Thank, John

05-18-2013, 12:31 AM	#40
natec/10 Senior Member Join Date: Jan 2007 Location: Pittsburgh Posts: 242	Re: single wall patch's 71blksuper4x4 right nw the transfer case shifter is evading me warbucket pics of the tach dash with air pressure the bezel is junk other than that no other damage Attached Images

06-09-2013, 10:44 PM	#42
1972Blaze Registered User Join Date: May 2013 Location: Covington, Louisiana Posts: 243	Re: single wall patch's Do you have the angle brackets that would have held the rear interior side panels on at the rear? Thanks. Posted via Mobile Device

06-12-2013, 04:17 AM	#43
natec/10 Senior Member Join Date: Jan 2007 Location: Pittsburgh Posts: 242	Re: single wall patch's 1972Blaze I do have them all I dont want to break up all the rear mounting brackets the ones you want you know are really just a bent peice of sheet metal if you want i can get you the measurements and a pic if you want to make some thanks Ray



Register or Log In To remove these advertisements.

06-14-2013, 02:54 AM	#45
Effeckt Registered User Join Date: Apr 2010 Location: Phoenix, AZ Posts: 341	Re: single wall patch's I am interested in the section that attaches to the windshield if Turp didn't get it. Same front 6-8" or so. Posted via Mobile Device __________________ My 1972 K5 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=399719

06-14-2013, 07:03 AM	#46
cudaman Registered User Join Date: May 2013 Location: Kennesaw GA Posts: 31	Re: single wall patch's Are there any rear seat belts? Rear seat hold downs and hardware.

06-14-2013, 11:35 PM	#48
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,431	Re: single wall patch's How much did you want for the windshield frame...... __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

06-17-2013, 12:08 AM	#49
natec/10 Senior Member Join Date: Jan 2007 Location: Pittsburgh Posts: 242	Re: single wall patch's 1972Blaze here is a pic of what i got the top angle braket has some rust on it and the bottom one is just bent sheet metal $85.00 shipped turp and Effeckt 2 pics of what i got my sawzall was drunk that day $50.00 plus shipping I also have a double wall roof no hatch $50.00 its in another post of mine jaros44sr I have no Idea make a good fair offer on it and its yours if you want some more pics let me know I also have the dome lights for a single wall top from the fuse box back no cuts $100.00plus shipping Attached Images

06-17-2013, 07:29 AM	#50
cudaman Registered User Join Date: May 2013 Location: Kennesaw GA Posts: 31	Re: single wall patch's natec/10: Ill take the dome light harness. Pm info.

Register or Log In To remove these advertisements.