KS What's left of a 1968 3/4 ton 2wd. BEING SCRAPPED FRIDAY 9/13!! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lha1992 · 09-12-2013, 11:44 PM

How is the condition of the sheet metal in the firewall on the corners?

Such as in this picture underneath the hood of my truck you see in the corner on the firewall where rust is coming up:

I'll get a better pick if you like of what i'm talking about. If they're good gimme a price if you would to 98204.

bassetlust · 09-13-2013, 05:50 AM

Those are the areas that I was speaking of, GeneralMotors.

aftamathe86 · 09-13-2013, 06:31 AM

I'll take the bed corner send me an address and I will get a USPS money order out to ya thanks
Posted via Mobile Device

71GeneralMotorsCorp · 09-13-2013, 08:21 AM

PM sent to everyone that wanted parts.

I do not have a hood for it anymore, front clip has been gone for quite a while.

I do have a v8 radiator and some extra door latch stuff.

lha1992: Bassetlust has already spoken for those patch panels, if the deal falls through, i'll get ahold of you.

aftamathe86 · 09-13-2013, 11:57 AM

Money order sent thanks
Posted via Mobile Device

gdavis · 09-13-2013, 04:03 PM

I'll pass on the mirrow arm

19Chevy67C10 · 09-13-2013, 06:18 PM

How much for a piece of the outter cowl panel to the right hand side? I need a patch just pass the begining of the wiper transition area.

bassetlust · 09-13-2013, 06:39 PM

Here are the pics of the cowl areas that I need, Coby.

bassetlust · 09-13-2013, 06:48 PM

Let's try that one again - here are the cowl areas that I need, Coby:

supercheyenne · 09-14-2013, 02:52 AM

Have any pictures of the 6 cylinder? And could you describe it's condition more than "good"?

Thanks
Jim

71GeneralMotorsCorp · 09-14-2013, 08:17 AM

@supercheyenne: The farmer that i bought it from said that the head was "just" (Farmer was old, so i wouldn't trust that it was gone through like yesterday.) gone through and new valves put in and resurfaced. the bottom end is not locked up. but hasn't been started in many years. The carb and distributor are gone, but i think i have an Inline 6 HEI distributor i'll throw in along with a decent looking 2 barrel carb..

supercheyenne · 09-14-2013, 05:17 PM

Quote:

Originally Posted by 71GeneralMotorsCorp

but hasn't been started in many years.

That makes it tough. Let me tear into my motor tonight and I'll see if I can have a decision by Sunday morning.

Thanks
James.

bassetlust · 09-14-2013, 05:20 PM

Money order and PM sent - thanks.

olblue60@aol.com · 09-15-2013, 06:07 AM

I'll take the cluster

grwnded71 · 09-15-2013, 11:03 AM

FRAME MOUNTS for the radiator core support? price and shipping to 50613

supercheyenne · 09-15-2013, 02:33 PM

I'm going to pass on the motor. Was just looking for a drop in to get the truck running enough to pass inspection.

Thanks
Jim

JimmyBonz · 09-21-2013, 09:44 PM

Have You scrapped the truck already??? I need the center-section out of the EATON Rear_END?????TRYING to find a 4.10 Gear-set or 3.73 Ring and Pinion Set that was in the 'camper special'. 4.10 was most common in all other C-20 trucks. Either one would serve me well.
Let me hear from Ya if You can Help at all or point me somewhere else.
Jimmy

Nuts · 09-23-2013, 09:52 PM

Do you have any '67 hood letters available? I am outside of Humboldt. would also be curious to see what else you might have available

71GeneralMotorsCorp · 09-24-2013, 08:14 AM

Nuts, I do not have any hood letters. PM me your cell number and i'll give you a call.

**NC67Chev** · 11-09-2013, 11:13 AM

Do you happen to still have the passenger mirror arm?

kda2000 · 11-10-2013, 02:05 AM

I'm looking for a carrier bearing mounting bracket -- like the one in the first picture in this thread: http://67-72chevytrucks.com/vboard/s...d.php?t=584787

I'm also looking for the 1 (or a set) of swaybar mounting brackets, the brackets that are riveted to the frame.

Can you let me know if you have either - Thanks
Ken

71GeneralMotorsCorp · 11-10-2013, 10:24 AM

This truck is long gone.. Sorry guys

09-12-2013, 11:44 PM	#26
lha1992 Registered User Join Date: Apr 2010 Location: Everett, WA Posts: 504	Re: What's left of a 1968 3/4 ton 2wd. BEING SCRAPPED FRIDAY 9/13!! How is the condition of the sheet metal in the firewall on the corners? Such as in this picture underneath the hood of my truck you see in the corner on the firewall where rust is coming up: I'll get a better pick if you like of what i'm talking about. If they're good gimme a price if you would to 98204. Last edited by lha1992; 09-13-2013 at 06:35 AM.

09-13-2013, 05:50 AM	#27
bassetlust Registered User Join Date: Apr 2013 Location: Lady Lake, Florida Posts: 34	Re: What's left of a 1968 3/4 ton 2wd. BEING SCRAPPED FRIDAY 9/13!! Those are the areas that I was speaking of, GeneralMotors.

09-13-2013, 06:31 AM	#28
aftamathe86 Registered User Join Date: Feb 2010 Location: mcminnville,tn Posts: 153	Re: What's left of a 1968 3/4 ton 2wd. BEING SCRAPPED FRIDAY 9/13!! I'll take the bed corner send me an address and I will get a USPS money order out to ya thanks Posted via Mobile Device __________________ 67 step---68 fleet---67 fleet

09-13-2013, 08:21 AM	#29
71GeneralMotorsCorp Registered User Join Date: Jul 2011 Location: Kansas Posts: 266	Re: What's left of a 1968 3/4 ton 2wd. BEING SCRAPPED FRIDAY 9/13!! PM sent to everyone that wanted parts. I do not have a hood for it anymore, front clip has been gone for quite a while. I do have a v8 radiator and some extra door latch stuff. lha1992: Bassetlust has already spoken for those patch panels, if the deal falls through, i'll get ahold of you. __________________ "Repetition penetrates even the dullest of minds"

09-13-2013, 11:57 AM	#30
aftamathe86 Registered User Join Date: Feb 2010 Location: mcminnville,tn Posts: 153	Re: What's left of a 1968 3/4 ton 2wd. BEING SCRAPPED FRIDAY 9/13!! Money order sent thanks Posted via Mobile Device __________________ 67 step---68 fleet---67 fleet

09-13-2013, 04:03 PM	#31
gdavis Registered User Join Date: Aug 2012 Location: Homosassa, Fl. Posts: 2,965	Re: What's left of a 1968 3/4 ton 2wd. BEING SCRAPPED FRIDAY 9/13!! I'll pass on the mirrow arm __________________ Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper

09-13-2013, 06:18 PM	#32
19Chevy67C10 Registered User Join Date: Sep 2011 Location: At the end of the road! Posts: 282	Re: What's left of a 1968 3/4 ton 2wd. BEING SCRAPPED FRIDAY 9/13!! How much for a piece of the outter cowl panel to the right hand side? I need a patch just pass the begining of the wiper transition area. __________________ Kev's-C-10

09-13-2013, 06:39 PM	#33
bassetlust Registered User Join Date: Apr 2013 Location: Lady Lake, Florida Posts: 34	Re: What's left of a 1968 3/4 ton 2wd. BEING SCRAPPED FRIDAY 9/13!! Here are the pics of the cowl areas that I need, Coby.

09-13-2013, 06:48 PM	#34
bassetlust Registered User Join Date: Apr 2013 Location: Lady Lake, Florida Posts: 34	Re: What's left of a 1968 3/4 ton 2wd. BEING SCRAPPED FRIDAY 9/13!! Let's try that one again - here are the cowl areas that I need, Coby:

09-14-2013, 02:52 AM	#35
supercheyenne Registered User Join Date: Dec 1999 Location: Newton, KS, U.S.A. Posts: 1,142	Re: What's left of a 1968 3/4 ton 2wd. BEING SCRAPPED FRIDAY 9/13!! Have any pictures of the 6 cylinder? And could you describe it's condition more than "good"? Thanks Jim

09-14-2013, 08:17 AM	#36
71GeneralMotorsCorp Registered User Join Date: Jul 2011 Location: Kansas Posts: 266	Re: What's left of a 1968 3/4 ton 2wd. BEING SCRAPPED FRIDAY 9/13!! @supercheyenne: The farmer that i bought it from said that the head was "just" (Farmer was old, so i wouldn't trust that it was gone through like yesterday.) gone through and new valves put in and resurfaced. the bottom end is not locked up. but hasn't been started in many years. The carb and distributor are gone, but i think i have an Inline 6 HEI distributor i'll throw in along with a decent looking 2 barrel carb.. __________________ "Repetition penetrates even the dullest of minds" Last edited by 71GeneralMotorsCorp; 09-14-2013 at 08:26 AM.

09-14-2013, 05:20 PM	#38
bassetlust Registered User Join Date: Apr 2013 Location: Lady Lake, Florida Posts: 34	Re: What's left of a 1968 3/4 ton 2wd. BEING SCRAPPED FRIDAY 9/13!! Money order and PM sent - thanks.

09-15-2013, 06:07 AM	#39
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: What's left of a 1968 3/4 ton 2wd. BEING SCRAPPED FRIDAY 9/13!! I'll take the cluster __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

09-15-2013, 11:03 AM	#40
grwnded71 Registered User Join Date: Jul 2010 Location: Cedar Falls,IA Posts: 301	Re: What's left of a 1968 3/4 ton 2wd. BEING SCRAPPED FRIDAY 9/13!! FRAME MOUNTS for the radiator core support? price and shipping to 50613 __________________ BRETT 70 C10 SWB,ECE 4.5/6 drop 68 C10 LWB Survivor DD 06 Harley-Davidson FLHT 71 Cheyenne Super LWB/sold

09-15-2013, 02:33 PM	#41
supercheyenne Registered User Join Date: Dec 1999 Location: Newton, KS, U.S.A. Posts: 1,142	Re: What's left of a 1968 3/4 ton 2wd. BEING SCRAPPED FRIDAY 9/13!! I'm going to pass on the motor. Was just looking for a drop in to get the truck running enough to pass inspection. Thanks Jim



Register or Log In To remove these advertisements.

09-21-2013, 09:44 PM	#42
JimmyBonz Registered User Join Date: Sep 2002 Location: Glenview,north of Chicago by 10 Miles Posts: 12	Re: What's left of a 1968 3/4 ton 2wd. BEING SCRAPPED FRIDAY 9/13!! Have You scrapped the truck already??? I need the center-section out of the EATON Rear_END?????TRYING to find a 4.10 Gear-set or 3.73 Ring and Pinion Set that was in the 'camper special'. 4.10 was most common in all other C-20 trucks. Either one would serve me well. Let me hear from Ya if You can Help at all or point me somewhere else. Jimmy __________________ Jimmy Gatz

09-23-2013, 09:52 PM	#43
Nuts Registered User Join Date: Oct 2012 Location: Humboldt, KS Posts: 2	Re: What's left of a 1968 3/4 ton 2wd. BEING SCRAPPED FRIDAY 9/13!! Do you have any '67 hood letters available? I am outside of Humboldt. would also be curious to see what else you might have available

09-24-2013, 08:14 AM	#44
71GeneralMotorsCorp Registered User Join Date: Jul 2011 Location: Kansas Posts: 266	Re: What's left of a 1968 3/4 ton 2wd. BEING SCRAPPED FRIDAY 9/13!! Nuts, I do not have any hood letters. PM me your cell number and i'll give you a call. __________________ "Repetition penetrates even the dullest of minds"

11-09-2013, 11:13 AM	#45
NC67Chev Senior Member Join Date: Oct 2009 Location: Greensboro, NC Posts: 698	Re: What's left of a 1968 3/4 ton 2wd. BEING SCRAPPED FRIDAY 9/13!! Do you happen to still have the passenger mirror arm? __________________ 1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, Fleetside Upgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar

11-10-2013, 02:05 AM	#46
kda2000 Registered User Join Date: Oct 2013 Location: Austin, TX Posts: 170	Re: What's left of a 1968 3/4 ton 2wd. BEING SCRAPPED FRIDAY 9/13!! I'm looking for a carrier bearing mounting bracket -- like the one in the first picture in this thread: http://67-72chevytrucks.com/vboard/s...d.php?t=584787 I'm also looking for the 1 (or a set) of swaybar mounting brackets, the brackets that are riveted to the frame. Can you let me know if you have either - Thanks Ken

11-10-2013, 10:24 AM	#47
71GeneralMotorsCorp Registered User Join Date: Jul 2011 Location: Kansas Posts: 266	Re: What's left of a 1968 3/4 ton 2wd. BEING SCRAPPED FRIDAY 9/13!! This truck is long gone.. Sorry guys __________________ "Repetition penetrates even the dullest of minds"

Register or Log In To remove these advertisements.