CO 1968 c/20 part out - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bhahn70 · 12-04-2016, 12:17 PM

Quote:

Originally Posted by Theboatandcarman

Is that rear axle a 4.10 with a locker? It's definitely a ho52!

Won't be getting into that till next month. I'll let you know then.
Thanx

bhahn70 · 12-04-2016, 12:18 PM

Quote:

Originally Posted by 68bowtie

i will take the rear tail light harness, tail light bezels, and tailgate trim pending price and condition (and existence).

No trim. But I'll check Condition of harness today.

bhahn70 · 12-04-2016, 12:20 PM

Quote:

Originally Posted by bhahn70

No trim. But I'll check Condition of harness today.

Pic

54Caddy · 12-04-2016, 01:01 PM

Quote:

Originally Posted by bhahn70

I will check wheel tomorrow. I don't know if gauges work. 75.00 plus shipping on gauges.

Let me know on wheel then.

bhahn70 · 12-04-2016, 05:36 PM

Quote:

Originally Posted by 54Caddy

Price on steering wheel and condition as well as cluster

Wheels all cracked

bhahn70 · 12-04-2016, 05:37 PM

Quote:

Originally Posted by bhahn70

No trim. But I'll check Condition of harness today.

Harness is trash

**68bowtie** · 12-04-2016, 05:59 PM

Quote:

Originally Posted by bhahn70

Harness is trash

thanks for checking

bhahn70 · 12-04-2016, 08:41 PM

Quote:

Originally Posted by Dustmaker65

Brian, how does the cab and front fenders look? I am in ILL if you are bringing a trailer

Thanks!
Jimmy

Looks like hole needs filling for antenna in pass. Fender one smallish rust hole in lower driver.
175.00 ea.
Pass door junk inner is rotten outer is smashed.
Drivers door nice. 225.00

Theboatandcarman · 12-04-2016, 08:43 PM

Quote:

Originally Posted by bhahn70

Won't be getting into that till next month. I'll let you know then.
Thanx

ok will be looking forward to it! thanks

glovebox will have G86 option and i forget the code, but it will say 4:11 gear option as well

bhahn70 · 12-04-2016, 08:46 PM

Quote:

Originally Posted by bhahn70

Looks like hole needs filling for antenna in pass. Fender one smallish rust hole in lower driver.
175.00 ea.
Pass door junk inner is rotten outer is smashed.
Drivers door nice. 225.00

Pics

bhahn70 · 12-04-2016, 08:50 PM

Quote:

Originally Posted by bhahn70

Pics

More

bhahn70 · 12-04-2016, 08:52 PM

Quote:

Originally Posted by bhahn70

More

bhahn70 · 12-04-2016, 09:00 PM

Quote:

Originally Posted by Theboatandcarman

ok will be looking forward to it! thanks

glovebox will have G86 option and i forget the code, but it will say 4:11 gear option as well

Glove box was from a different truck so not any good there. I know about the rear diff. But not much pm what I'm looking for I didn't see a tag and I didn't feel like crawling around In the dirt today. Do you want the whole thing. I'm moving to Arizona so maybe we should figure this out earlier than later.

bhahn70 · 12-04-2016, 09:09 PM

Quote:

Originally Posted by Rods

Would like to have first option these parts after close up pics and price

1) c-20 fender badges

2) driver side mirror and arm as well as backing plate and hardware

3) Air cleaner

Fender badges 45.00 shipped
Mirror arm is gone already
Air cleaner 40.00

**68Custom** · 12-04-2016, 10:19 PM

Price on the front bumper brackets (all 4) please?

What's the condition of the heater box? More specific, the metal that is typically rotted at the firewall for blower motor. I don't need the blower fan or the core.

Thanks,

Aaron

bhahn70 · 12-04-2016, 10:48 PM

Quote:

Originally Posted by 68Custom

Price on the front bumper brackets (all 4) please?

What's the condition of the heater box? More specific, the metal that is typically rotted at the firewall for blower motor. I don't need the blower fan or the core.

Thanks,

Aaron

Are you looking for the firewall metal itself not really sure what you need.
If brackets are straight 45.00 plus shipping.

**too much stuff** · 12-04-2016, 10:58 PM

The cab doesn't look that bad to me. I know a couple of members in KS could maybe be dropped off on the way? What is bad on it?
Thanks.

bhahn70 · 12-04-2016, 11:16 PM

Quote:

Originally Posted by too much stuff

The cab doesn't look that bad to me. I know a couple of members in KS could maybe be dropped off on the way? What is bad on it?
Thanks.

Cowl is rotten pretty bad ,vent boxes are bad, pass rocker, cab corner , kick panels, floor braces, sat under a tree unmoved for 14 years gathering gunk. It's shot.

**too much stuff** · 12-04-2016, 11:43 PM

Quote:

Originally Posted by bhahn70

Cowl is rotten pretty bad ,vent boxes are bad, pass rocker, cab corner , kick panels, floor braces, sat under a tree unmoved for 14 years gathering gunk. It's shot.

That's too bad. Sure looks better than the cabs I see around here! Thanks for the reply.

bhahn70 · 12-05-2016, 12:25 AM

Quote:

Originally Posted by 1971 GMC Jimmy 2wd

Can you upload pictures of seatbelt? Thanks. And just let me know about the door panels

Drivers side has a dent and one messed up hole passenger side is good.
I'll have seat belt pics tomorrow.

**Rods** · 12-05-2016, 01:48 AM

Thanks for the pics,I will pass,on the before mentioned items.....

bhahn70 · 12-05-2016, 01:50 AM

Quote:

Originally Posted by Rods

Thanks for the pics,I will pass,on the before mentioned items.....

No problem

**Curtb1971** · 12-05-2016, 02:00 AM

Hey there,
How much for the cowl panel picked up?
Thanks, Curt

bhahn70 · 12-05-2016, 02:16 AM

Quote:

Originally Posted by curtb1971

hey there,
how much for the cowl panel picked up?
Thanks, curt

80.00

**Curtb1971** · 12-05-2016, 02:25 AM

Quote:

Originally Posted by bhahn70

80.00

Cool, hard to tell if the front lip is rusted up in the pics but if it's rust free I'll take it at $80.

12-04-2016, 10:19 PM	#40
68Custom Hammer On! Join Date: Jul 2001 Location: Olathe, KS Posts: 473	Re: 1968 c/20 part out Price on the front bumper brackets (all 4) please? What's the condition of the heater box? More specific, the metal that is typically rotted at the firewall for blower motor. I don't need the blower fan or the core. Thanks, Aaron __________________ 1968 C20 Inline 6 250 SM465 4 speed 1968 K10 Inline 6 250 SM465 4 speed

12-04-2016, 10:58 PM	#42
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,715	Re: 1968 c/20 part out The cab doesn't look that bad to me. I know a couple of members in KS could maybe be dropped off on the way? What is bad on it? Thanks. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-05-2016, 01:48 AM	#46
Rods Senior Member Join Date: Aug 2014 Location: Arizona Posts: 1,475	Re: 1968 c/20 part out Thanks for the pics,I will pass,on the before mentioned items.....

12-05-2016, 02:00 AM	#48
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,007	Re: 1968 c/20 part out Hey there, How much for the cowl panel picked up? Thanks, Curt



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.