Finally "Silvers" build thread!! ('78 swb 2wd silverado) - Page 20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jdurant · 12-10-2009, 01:37 AM

Wow, man. You've got a bunch done since last I checked in. Looks like it is coming along great. And congrats on the promotion.
The only advice I can give for your engine detailing is this--Did I miss if you are keeping the exhaust manifold? If so I think you should spend the money and have them coated. Cause they aren't gonna look so great after just a couple of miles. And that would be a real shame.
Also I think plastic stuff and most underhood stuff looks better semi black than glossy--especially things you don't want to draw attention to.
Also I'm a big fan of black crinkle powder coat--It would go really well with the silver and red.

Driveway Dreams · 12-10-2009, 01:46 AM

Quote:

Originally Posted by menace121978

... too cold out there to be painting!

You don't know cold there big guy.

The official temp here this morning was 26* BELOW 0!!! That is a -26*. Now that was cold. And that is without windchill. Tonight at 10pm it was already -11*.

**nlped** · 12-10-2009, 08:57 AM

^^^ Uuummmm, yuck!!! I hate the cold!

Project is coming along really well, Dennis. How many days do you have left on the clock

Jonboy · 12-10-2009, 09:50 AM

Quote:

Originally Posted by Driveway Dreams

You don't know cold there big guy.

The official temp here this morning was 26* BELOW 0!!! That is a -26*. Now that was cold. And that is without windchill. Tonight at 10pm it was already -11*.

That's just a reason to move.

menace121978 · 12-10-2009, 11:23 AM

Quote:

Originally Posted by jdurant

Wow, man. You've got a bunch done since last I checked in. Looks like it is coming along great. And congrats on the promotion.
The only advice I can give for your engine detailing is this--Did I miss if you are keeping the exhaust manifold? If so I think you should spend the money and have them coated. Cause they aren't gonna look so great after just a couple of miles. And that would be a real shame.
Also I think plastic stuff and most underhood stuff looks better semi black than glossy--especially things you don't want to draw attention to.
Also I'm a big fan of black crinkle powder coat--It would go really well with the silver and red.

thanks buddy... i'm going with the brp headers and hopefully (i'll know today) they can coat them black. thanks for the pointers

Quote:

Originally Posted by Driveway Dreams

You don't know cold there big guy.

The official temp here this morning was 26* BELOW 0!!! That is a -26*. Now that was cold. And that is without windchill. Tonight at 10pm it was already -11*.

whoa! that is just ridiculous! and just think we were contemplating moving out there!! i was thinking the 30's and 40's were freezing!

Quote:

Originally Posted by nlped

^^^ Uuummmm, yuck!!! I hate the cold!

Project is coming along really well, Dennis. How many days do you have left on the clock

me too man! i'd rather be blistering hot than freezing cold!

and the way i see it i have around 720 days left to stay on my deadline!

(that's 2 years left on the 3 that i planned!) i'm actually way ahead schedule as long as i give 6 months to a year for the body and paint

Quote:

Originally Posted by Jonboy

That's just a reason to move.

i'd be outta there

why put yourself through that!

**nlped** · 12-10-2009, 12:29 PM

"i'm actually way ahead schedule as long as i give 6 months to a year for the body and paint

"

LOL!!! Well then, it sounds like I am on the same schedule as you

Driveway Dreams · 12-10-2009, 11:58 PM

Quote:

Originally Posted by menace121978

and the way i see it i have around 720 days left to stay on my deadline!

(that's 2 years left on the 3 that i planned!) i'm actually way ahead schedule as long as i give 6 months to a year for the body and paint

Note to all: There is a new schedule for us all to adapt. Sorry Bob, I like this one better.

So, when am I gonna be getting a package? I would enjoy doing those covers for you. But I need long enough with them to get them back to you to go to paint with the truck. So, if you want, hit me up!

menace121978 · 12-11-2009, 09:55 AM

i'll let you know on those covers buddy. it may be awhile... i'll make sure you have plenty of quality time with them.

mcbassin · 12-11-2009, 09:59 AM

Quote:

Originally Posted by Driveway Dreams

Note to all: There is a new schedule for us all to adapt. Sorry Bob, I like this one better.

Everyone knows Bob's project is a freak, not many planned out like that. I like your pace much better too. Keep it up!

JohnC · 12-11-2009, 10:00 AM

Yeah Bob is a show off.

You notice I posted that here in your thread Dennis, not in Bob's

Jonboy · 12-11-2009, 10:20 AM

Yeah, but Bob did that monumental build and went AWOL. See what happens with that level of planning? You have to have a bunch of stuff pop up to keep it interesting.....

menace121978 · 12-11-2009, 10:22 AM

yea, i'm still amazed at how his swap unfolded. 1 day he says "hey, i got a square body!" the next day, "i think i'll throw a gen III in him this winter!" next day "hey, i bought a ls combo!" and the next day he's driving it making rolling burn out videos and say'in how easy it was!!

JohnC · 12-11-2009, 10:23 AM

Yeah that's why he's an inspiration to all of us! He's a square body legend in the making!

Jonboy · 12-11-2009, 10:25 AM

Maybe he is missing to solidify his "legend" status.

menace121978 · 12-11-2009, 10:31 AM

exactly!

even though he's not around he'll always be close to our hearts!

TRUE LEGEND!

JohnC · 12-11-2009, 10:37 AM

He's around he's just lurking!

Driveway Dreams · 12-15-2009, 11:53 PM

I know that he is busy with work and stuff. I just learned how that can be. My posts have slowed drastically since I got a job where I actually have to work.

But Bob created a monster and did it in the time that it takes most of us to swap a seat out or get a sport bumper and put it on. And I can tell you all that Fred does not look like a cobbled up mess though even in that quick time. I guess that is where the reading and planning helped. And I am sure that Dennis' truck will be as impressive if not maybe even a little more so, based on the overall goals of it.

menace121978 · 12-16-2009, 01:16 AM

much apprieciated buddy

small update: the new '87 fuel sending units and high psi switching valve arrived today

and the original '78 shop manual got here the other day. i'll take some pics soon! still waiting on the fuel pumps and trying to figure what mounts to go with.
i think i'm gonna end up using the plates like Bob did and buy the high mount a/c brackets and compressor and just reuse the stock tranny crossmember.

BRP really let me down. they dont know for sure that the a/c compressor and lines will clear and they want me to mail my compressor and lines to them. to much B.S. then he goes on to say that 98% of the plate swaps wont work with their headers. they just missed out on at least a $500 sale and maybe a grand if they knew FOR SURE that the stock a/c compressor would work. anyways, i'll get it figured... need to find a top mount a/c bracket that isnt all chromed up like s&p's..

Driveway Dreams · 12-16-2009, 01:21 AM

If all else fails, buy the chromed one and sand and paint it. That is easy, if you can only find that one from S&P.

menace121978 · 12-16-2009, 01:29 AM

we're on the same page man. we will see how it goes.

got to slow down a bit and save again. just paid off my card today. total so far for the 6 oh is right about $3100. just a few more little things like the adaptor plates, intake gaskets, knock sensor harness, vette regulator, and high psi hoses. (been reading about what to replace on the ls motor since i got'er down so far)

Driveway Dreams · 12-16-2009, 01:34 AM

Dang...$3,100?!?! Wow, I could "finish" my truck for that. Of course it is never really finished. But good job getting it all coming. If you can't tell I am closely following your build. I have a feeling that I am gonna love your truck when you get it done.

menace121978 · 12-16-2009, 01:45 AM

ya i hope EVERYONE loves her... btw, i didnt get that tax break on the motor/trans i was hoping for! so that inflated it a couple hundred.

man, you sure know how to make me feel good... you could FINISH yours for that!

that entire statement you just made is kinda like pulling the dogs tail and petting her at the same time!!

j/k bro, nothing but love!!

Driveway Dreams · 12-16-2009, 01:54 AM

But that would not have all the work that you are putting into yours. But it would look pretty damned cool even still for that. Sorry I couldn't help you bargain for that discount. The guy who I am building the Biscayne for has still not said to do it.
You know there is love. Especially after the whoopin' the 9ers put on the Cards last night.

menace121978 · 12-16-2009, 02:03 AM

GO 9'ERS!!!

we both know what the key is though... PAINT & BODY! being that just so happens to be what you do that $3k would finish yours off!

STOCKISH · 12-16-2009, 10:46 PM

So, I take it from reading yours and Bobs build that NO stock compressor will fit in the stock location in our trucks? With the LS engine I mean. What about the smaller TBSS A/C compressor?

12-10-2009, 01:37 AM	#476
jdurant Senior Member Join Date: Dec 2007 Location: Houston, Texas Posts: 679	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Wow, man. You've got a bunch done since last I checked in. Looks like it is coming along great. And congrats on the promotion. The only advice I can give for your engine detailing is this--Did I miss if you are keeping the exhaust manifold? If so I think you should spend the money and have them coated. Cause they aren't gonna look so great after just a couple of miles. And that would be a real shame. Also I think plastic stuff and most underhood stuff looks better semi black than glossy--especially things you don't want to draw attention to. Also I'm a big fan of black crinkle powder coat--It would go really well with the silver and red. __________________ Joseph 87 Turbo Buick 92 5.0 Mustang coupe 87 GMC Sierra SWB 82 Chevy K5 Blazer 2wd Last edited by jdurant; 12-10-2009 at 01:38 AM.

12-10-2009, 08:57 AM	#478
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) ^^^ Uuummmm, yuck!!! I hate the cold! Project is coming along really well, Dennis. How many days do you have left on the clock __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

12-10-2009, 12:29 PM	#481
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) "i'm actually way ahead schedule as long as i give 6 months to a year for the body and paint" LOL!!! Well then, it sounds like I am on the same schedule as you __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

12-11-2009, 09:55 AM	#483
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) i'll let you know on those covers buddy. it may be awhile... i'll make sure you have plenty of quality time with them. __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

12-11-2009, 10:00 AM	#485
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Yeah Bob is a show off. You notice I posted that here in your thread Dennis, not in Bob's Last edited by JohnC; 12-11-2009 at 10:00 AM.

12-11-2009, 10:20 AM	#486
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Yeah, but Bob did that monumental build and went AWOL. See what happens with that level of planning? You have to have a bunch of stuff pop up to keep it interesting.....

12-11-2009, 10:22 AM	#487
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) yea, i'm still amazed at how his swap unfolded. 1 day he says "hey, i got a square body!" the next day, "i think i'll throw a gen III in him this winter!" next day "hey, i bought a ls combo!" and the next day he's driving it making rolling burn out videos and say'in how easy it was!! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

12-11-2009, 10:23 AM	#488
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Yeah that's why he's an inspiration to all of us! He's a square body legend in the making!

12-11-2009, 10:25 AM	#489
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Maybe he is missing to solidify his "legend" status.

12-11-2009, 10:31 AM	#490
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) exactly! even though he's not around he'll always be close to our hearts! TRUE LEGEND! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

12-11-2009, 10:37 AM	#491
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) He's around he's just lurking!

12-15-2009, 11:53 PM	#492
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) I know that he is busy with work and stuff. I just learned how that can be. My posts have slowed drastically since I got a job where I actually have to work. But Bob created a monster and did it in the time that it takes most of us to swap a seat out or get a sport bumper and put it on. And I can tell you all that Fred does not look like a cobbled up mess though even in that quick time. I guess that is where the reading and planning helped. And I am sure that Dennis' truck will be as impressive if not maybe even a little more so, based on the overall goals of it. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

12-16-2009, 01:16 AM	#493
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) much apprieciated buddy small update: the new '87 fuel sending units and high psi switching valve arrived today and the original '78 shop manual got here the other day. i'll take some pics soon! still waiting on the fuel pumps and trying to figure what mounts to go with. i think i'm gonna end up using the plates like Bob did and buy the high mount a/c brackets and compressor and just reuse the stock tranny crossmember. BRP really let me down. they dont know for sure that the a/c compressor and lines will clear and they want me to mail my compressor and lines to them. to much B.S. then he goes on to say that 98% of the plate swaps wont work with their headers. they just missed out on at least a $500 sale and maybe a grand if they knew FOR SURE that the stock a/c compressor would work. anyways, i'll get it figured... need to find a top mount a/c bracket that isnt all chromed up like s&p's.. __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

12-16-2009, 01:21 AM	#494
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) If all else fails, buy the chromed one and sand and paint it. That is easy, if you can only find that one from S&P. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

12-16-2009, 01:29 AM	#495
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) we're on the same page man. we will see how it goes. got to slow down a bit and save again. just paid off my card today. total so far for the 6 oh is right about $3100. just a few more little things like the adaptor plates, intake gaskets, knock sensor harness, vette regulator, and high psi hoses. (been reading about what to replace on the ls motor since i got'er down so far) __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list



Register or Log In To remove these advertisements.

12-16-2009, 01:34 AM	#496
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Dang...$3,100?!?! Wow, I could "finish" my truck for that. Of course it is never really finished. But good job getting it all coming. If you can't tell I am closely following your build. I have a feeling that I am gonna love your truck when you get it done. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

12-16-2009, 01:45 AM	#497
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) ya i hope EVERYONE loves her... btw, i didnt get that tax break on the motor/trans i was hoping for! so that inflated it a couple hundred. man, you sure know how to make me feel good... you could FINISH yours for that! that entire statement you just made is kinda like pulling the dogs tail and petting her at the same time!! j/k bro, nothing but love!! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

12-16-2009, 01:54 AM	#498
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) But that would not have all the work that you are putting into yours. But it would look pretty damned cool even still for that. Sorry I couldn't help you bargain for that discount. The guy who I am building the Biscayne for has still not said to do it. You know there is love. Especially after the whoopin' the 9ers put on the Cards last night. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

12-16-2009, 02:03 AM	#499
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) GO 9'ERS!!! we both know what the key is though... PAINT & BODY! being that just so happens to be what you do that $3k would finish yours off! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

12-16-2009, 10:46 PM	#500
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) So, I take it from reading yours and Bobs build that NO stock compressor will fit in the stock location in our trucks? With the LS engine I mean. What about the smaller TBSS A/C compressor? __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

Register or Log In To remove these advertisements.