The 6.0 Silverado Build - Page 20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 07-18-2010, 11:24 PM

Looks good. Keep it up. Bed and front clip go on quick so you're almost there!!!

menace121978 · 07-18-2010, 11:29 PM

Quote:

Originally Posted by Driveway Dreams

Keep in mind that Dennis had his bed set on, but Josh has doors. Looks good man! Keep at it!

smart ass! i noticed that too!

mcbassin · 07-18-2010, 11:46 PM

very nice progress! Glad to see the cab back at home!

*Stitch* · 07-19-2010, 07:32 AM

That's what i'm talking about. That looks good man

STOCKISH · 07-19-2010, 08:12 AM

Thanks guys! All the nice compliments are what keep us going at times.

menace121978 · 07-19-2010, 08:20 AM

^^^ i feel the same way Josh! truth be told im kinda burnt on it.

Jonboy · 07-19-2010, 09:09 AM

Looks good, Josh. You are almost there!

STOCKISH · 07-19-2010, 03:05 PM

Definately feels good to walk out into the garage and see it looking like a truck again. 7 months and counting since I got to drive it last. I'm getting impatient!

glock35ipsc · 07-19-2010, 03:44 PM

Grab some beer and call a few buddies over. That should have the bed on there in 3 minutes flat.
No bed on frame = no beer.

The offer of more beer should get front clip bolted on fairly quick.

After that, don't offer any more beer. Bad things might start happening, like taking things apart.

Used correctly, beer CAN solve a lot of problems!

JohnC · 07-19-2010, 03:56 PM

Quote:

Originally Posted by 1972SuperCheyenne

Definately feels good to walk out into the garage and see it looking like a truck again. 7 months and counting since I got to drive it last. I'm getting impatient!

Doesn't seem like it has been that long. Time flies when you're having fun!

Quote:

Originally Posted by glock35ipsc

Grab some beer and call a few buddies over. That should have the bed on there in 3 minutes flat.
No bed on frame = no beer.

The offer of more beer should get front clip bolted on fairly quick.

After that, don't offer any more beer. Bad things might start happening, like taking things apart.

Used correctly, beer CAN solve a lot of problems!

STOCKISH · 07-19-2010, 04:51 PM

I may get the bed on tonight if the baseball game I was planning on taking my little man to gets rained out!

JohnC · 07-19-2010, 04:54 PM

Now that you have the cab on the ball will start rolling again. The bed will be the next big thing, then after that you will be on cruise control!

Name: You Can Do It.jpg
Views: 825
Size: 20.6 KB

Name: You Can Do It.jpg
Views: 825
Size: 20.6 KB

VA72C10 · 07-19-2010, 05:07 PM

Quote:

Originally Posted by 1972SuperCheyenne

I may get the bed on tonight if the baseball game I was planning on taking my little man to gets rained out!

alright, stop doing the rain dance

menace121978 · 07-19-2010, 06:57 PM

**nlped** · 07-19-2010, 07:59 PM

Quote:

Originally Posted by glock35ipsc

Grab some beer and call a few buddies over. That should have the bed on there in 3 minutes flat.
No bed on frame = no beer.

The offer of more beer should get front clip bolted on fairly quick.

After that, don't offer any more beer. Bad things might start happening, like taking things apart.

Used correctly, beer CAN solve a lot of problems!

MMMmmmmm... BEER!!!

STOCKISH · 07-19-2010, 09:28 PM

Definately didnt do any rain dances. I would take a night at the ball park
(or a hockey game!) with my wife and son over working on the truck anyday! It's a shame soooo many people feel just the opposite. Trucks come and go, my family will not! Maybe tomorrow!

mcbassin · 07-19-2010, 11:15 PM

*Stitch* · 07-19-2010, 11:26 PM

Quote:

Originally Posted by 1972SuperCheyenne

Definately didnt do any rain dances. I would take a night at the ball park
(or a hockey game!) with my wife and son over working on the truck anyday! It's a shame soooo many people feel just the opposite. Trucks come and go, my family will not! Maybe tomorrow!

X2 buddy. That's why I put down the tools to takey little ones to the zoo. Wouldn't have turned down time with my kids and wife for nothing

mcbassin · 07-20-2010, 12:35 AM

Quote:

Originally Posted by 1972SuperCheyenne

Definately didnt do any rain dances. I would take a night at the ball park
(or a hockey game!) with my wife and son over working on the truck anyday! It's a shame soooo many people feel just the opposite. Trucks come and go, my family will not! Maybe tomorrow!

You guys will be shocked how fast they go from being 2 to 16.....time seems to fly.

ccreddell · 07-20-2010, 03:48 AM

Aint that the truth........

JohnC · 07-20-2010, 08:22 AM

Quote:

Originally Posted by mcbassin

you guys will be shocked how fast they go from being 2 to 16.....time seems to fly.

x2

silvereagle07 · 07-20-2010, 03:17 PM

The old trucks lookin good buddy! I finally found the u joint number Precision 348. Now you need to get a set of these babies.
http://www.summitracing.com/parts/MOR-85830/

STOCKISH · 07-20-2010, 03:23 PM

I like shiney! Looks expensive. Someone might want to steal it if I start putting stuff like that on it!

They might think I have alot of money invested in it or something.

silvereagle07 · 07-20-2010, 03:34 PM

Awe come on man! That's just lunch money compared to the rest of truck.

STOCKISH · 07-24-2010, 09:04 AM

No pics but I did finally get the driveshaft cut, balanced, new joints in it and installed. Hoping to get the bed on this weekend so I can start thinking about the exhaust. Hard to think about going out there with a 113 degree heat index.

07-18-2010, 11:24 PM	#476
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: The 6.0 Silverado Build Looks good. Keep it up. Bed and front clip go on quick so you're almost there!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-18-2010, 11:46 PM	#478
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: The 6.0 Silverado Build very nice progress! Glad to see the cab back at home! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

07-19-2010, 07:32 AM	#479
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: The 6.0 Silverado Build That's what i'm talking about. That looks good man

07-19-2010, 08:12 AM	#480
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: The 6.0 Silverado Build Thanks guys! All the nice compliments are what keep us going at times. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

07-19-2010, 08:20 AM	#481
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: The 6.0 Silverado Build ^^^ i feel the same way Josh! truth be told im kinda burnt on it. __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

07-19-2010, 09:09 AM	#482
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: The 6.0 Silverado Build Looks good, Josh. You are almost there! __________________ 1974 Jimmy- 5.3/4L80e/NP241

07-19-2010, 03:05 PM	#483
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: The 6.0 Silverado Build Definately feels good to walk out into the garage and see it looking like a truck again. 7 months and counting since I got to drive it last. I'm getting impatient! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

07-19-2010, 03:44 PM	#484
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: The 6.0 Silverado Build Grab some beer and call a few buddies over. That should have the bed on there in 3 minutes flat. No bed on frame = no beer. The offer of more beer should get front clip bolted on fairly quick. After that, don't offer any more beer. Bad things might start happening, like taking things apart. Used correctly, beer CAN solve a lot of problems! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE Last edited by glock35ipsc; 07-19-2010 at 03:46 PM.

07-19-2010, 04:51 PM	#486
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: The 6.0 Silverado Build I may get the bed on tonight if the baseball game I was planning on taking my little man to gets rained out! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

07-19-2010, 04:54 PM	#487
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: The 6.0 Silverado Build Now that you have the cab on the ball will start rolling again. The bed will be the next big thing, then after that you will be on cruise control! Last edited by JohnC; 07-19-2010 at 04:57 PM.

07-19-2010, 06:57 PM	#489
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: The 6.0 Silverado Build __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

07-19-2010, 09:28 PM	#491
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: The 6.0 Silverado Build Definately didnt do any rain dances. I would take a night at the ball park (or a hockey game!) with my wife and son over working on the truck anyday! It's a shame soooo many people feel just the opposite. Trucks come and go, my family will not! Maybe tomorrow! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

07-19-2010, 11:15 PM	#492
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: The 6.0 Silverado Build __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

07-20-2010, 03:48 AM	#495
ccreddell Registered User Join Date: Sep 2009 Location: Medford, OR. Posts: 207	Re: The 6.0 Silverado Build Aint that the truth........

07-20-2010, 03:17 PM	#497
silvereagle07 Registered User Join Date: Sep 2008 Location: Bailey, NC Posts: 2,462	Re: The 6.0 Silverado Build The old trucks lookin good buddy! I finally found the u joint number Precision 348. Now you need to get a set of these babies. http://www.summitracing.com/parts/MOR-85830/ Attached Images __________________ Jeramy '84 GMC project truck '85 Chevy 4X4 SOLD '07 Chevy Trailblazer SS 5th Annual SHPHC Car/Truck Show Pics http://67-72chevytrucks.com/vboard/s...d.php?t=543605 UPDATED PICS! CHECK 'EM OUT



Register or Log In To remove these advertisements.

07-20-2010, 03:23 PM	#498
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: The 6.0 Silverado Build I like shiney! Looks expensive. Someone might want to steal it if I start putting stuff like that on it! They might think I have alot of money invested in it or something. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

07-20-2010, 03:34 PM	#499
silvereagle07 Registered User Join Date: Sep 2008 Location: Bailey, NC Posts: 2,462	Re: The 6.0 Silverado Build Awe come on man! That's just lunch money compared to the rest of truck. __________________ Jeramy '84 GMC project truck '85 Chevy 4X4 SOLD '07 Chevy Trailblazer SS 5th Annual SHPHC Car/Truck Show Pics http://67-72chevytrucks.com/vboard/s...d.php?t=543605 UPDATED PICS! CHECK 'EM OUT

07-24-2010, 09:04 AM	#500
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: The 6.0 Silverado Build No pics but I did finally get the driveshaft cut, balanced, new joints in it and installed. Hoping to get the bed on this weekend so I can start thinking about the exhaust. Hard to think about going out there with a 113 degree heat index. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

Register or Log In To remove these advertisements.