And so it begins................ - Page 21 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

scotts62 · 02-17-2010, 07:49 PM

Quote:

Originally Posted by highperf4x4

Fortunately this crank is stamped "383" right beside the 10/10 so it's been done already

Yesm, i was just letting Gage know but i guess i could have quoted it to make it easier to who i was replying too.

*highperf4x4* · 02-17-2010, 09:39 PM

Yessir, I figured you was talkin to guage. I was just letting you know mine was already done. You know, an fyi kinda deal?

Unfortunately, the block turns out to be no goody. It had a spun main bearing on #2 that ate up the block pretty bad. Too much to align bore it.

So, I am looking for another 4-bolt block if anyone knows where I can locate one. I'd prefer to just go ahead and use an older 2 piece rear seal blolck I guess so I don't have to mess with a different crank or adapter.

scotts62 · 02-17-2010, 10:15 PM

I just may have a connection for one, but if my memory is right it has to go .060 over..

my67chevytruck · 02-17-2010, 10:23 PM

Travis, stop slacking and get some updated pics.....

scotts62 · 02-17-2010, 10:26 PM

Quote:

Originally Posted by my67chevytruck

Travis, stop slacking and get some updated pics.....

i have no room to talk but that was funny

jgh64pkup · 02-17-2010, 10:40 PM

i have a two bolt 2 piece block
but no 4 bolt

*highperf4x4* · 02-17-2010, 11:04 PM

Quote:

Originally Posted by scotts62

I just may have a connection for one, but if my memory is right it has to go .060 over..

I don't like to go more than .040 really. Could I take it and have it checked?

Quote:

Originally Posted by my67chevytruck

Travis, stop slacking and get some updated pics.....

Dangit Heath, I just posted an updated pic of the inside of the bed!!!!

Quote:

Originally Posted by jgh64pkup

i have a two bolt 2 piece block
but no 4 bolt

Gotta be a 4bolt for the 383. Especially the way I drive them.

scotts62 · 02-17-2010, 11:16 PM

Quote:

Originally Posted by highperf4x4

I don't like to go more than .040 really

Aww come on, go big or go home!

what you act like your worried about getting hot issues

ill call him tomorrow for ya.

*highperf4x4* · 02-17-2010, 11:41 PM

Oh I thought it was one of your blocks!

scotts62 · 02-18-2010, 08:59 AM

No, i have a ready to go 4 bolt bored .030 over, decked an line honed for the 62

Now i have about 3 TBI blocks laying around, numerous oil pans and valve covers, timing covers, heads, rods and even a couple BBC parts, its my personal iron junk yard

*highperf4x4* · 02-18-2010, 10:30 AM

So you're saying if I went with another 1 piece rear seal you could fix me up?

scotts62 · 02-19-2010, 12:21 AM

no not that one good try though

I know a guy that made a 383 out of a stock TBI engine 2 bolt main, it was a torky little dude for what it was

*highperf4x4* · 02-19-2010, 12:41 AM

Oh, all of your TBI blocks are 2bolt?

joe231 · 02-19-2010, 08:38 AM

What does it cost to convert a 2 bolt over to a 4 bolt?
I know I have read about it somewhere.

scotts62 · 02-19-2010, 08:43 AM

Quote:

Originally Posted by highperf4x4

Oh, all of your TBI blocks are 2bolt?

Yeah

Quote:

Originally Posted by joe231

What does it cost to convert a 2 bolt over to a 4 bolt?
I know I have read about it somewhere.

Think the splayed caps are $150 or so but ill have to check, if i remember right they charged around $300 but that was at Folks in Norman. You would be better off finding a good block for a couple hundred unless your going to make an un godly amount of horse power, but it is said that the factory 4 bolts are stronger than splayed 4 bolts but who knows, they all blow up the same

joe231 · 02-19-2010, 09:49 AM

Quote:

Originally Posted by scotts62

Yeah

Think the splayed caps are $150 or so but ill have to check, if i remember right they charged around $300 but that was at Folks in Norman. You would be better off finding a good block for a couple hundred unless your going to make an un godly amount of horse power, but it is said that the factory 4 bolts are stronger than splayed 4 bolts but who knows, they all blow up the same

I figured you would know

I was just thinking if you came up with a free 2 bolt block you might be better off converting it. It seems everyone wants a fortune for the 4 bolt blocks now a days.....

*highperf4x4* · 02-19-2010, 11:54 AM

I just need to find a truck motor that isn't running anymore and haul it off for someone.

I'm just sayin..............

scotts62 · 02-19-2010, 02:22 PM

Quote:

Originally Posted by joe231

I figured you would know

I was just thinking if you came up with a free 2 bolt block you might be better off converting it. It seems everyone wants a fortune for the 4 bolt blocks now a days.....

$150-250 is the range you will pay for a 4 bolt. Im about to go help my buddy at the machine shop for today and maybe tomorrow, ill check and see about a 4 bolt block.

Quote:

Originally Posted by highperf4x4

I just need to find a truck motor that isn't running anymore and haul it off for someone.

I'm just sayin..............

Cough cough

*highperf4x4* · 02-20-2010, 12:01 AM

Well, I have a line on couple from craigslist but they're either bored already or complete motors they don't want to part out. I've picked up good deals on them over the years. One will slide around sooner or later if you boys just keep your eyes peeled.

scotts62 · 02-20-2010, 12:45 AM

Worked at the machine shop today and bored 3 blocks for him, some change of scenery and made a few bucks. I asked him but he doesnt have one but he knows a guy that has one but thinks it has to go .060 over so thats out but ill keep a look out. He is in need of an old style virgin block if you happen to come across one.

*highperf4x4* · 02-20-2010, 01:30 AM

Does he want a 4bolt or does it matter?

scotts62 · 02-20-2010, 01:31 AM

Doesnt matter, the guy that wants him to build the thing wants a .030 block when done.

*highperf4x4* · 02-20-2010, 01:46 AM

Ok, I'll keep an eye out.

scotts62 · 02-20-2010, 01:54 AM

Cool thanks

I have a 4.3 you can stroke and put in the truck!

*highperf4x4* · 02-20-2010, 01:55 AM

Quote:

Originally Posted by scotts62

Cool thanks

I have a 4.3 you can stroke and put in the truck!

So do I. In fact, it's in the bed of my 4x4 right now and it's the motor that was in the truck when I bought it so it's a vin code Z motor.

02-17-2010, 09:39 PM	#502
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ Yessir, I figured you was talkin to guage. I was just letting you know mine was already done. You know, an fyi kinda deal? Unfortunately, the block turns out to be no goody. It had a spun main bearing on #2 that ate up the block pretty bad. Too much to align bore it. So, I am looking for another 4-bolt block if anyone knows where I can locate one. I'd prefer to just go ahead and use an older 2 piece rear seal blolck I guess so I don't have to mess with a different crank or adapter. Last edited by highperf4x4; 02-17-2010 at 09:46 PM.

02-17-2010, 10:15 PM	#503
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: And so it begins................ I just may have a connection for one, but if my memory is right it has to go .060 over.. __________________ Scott 93 crew cab build Project 62

02-17-2010, 10:23 PM	#504
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: And so it begins................ Travis, stop slacking and get some updated pics..... __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

02-17-2010, 10:40 PM	#506
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: And so it begins................ i have a two bolt 2 piece block but no 4 bolt __________________ Gage 1967 C10 Shortbed Stepside

02-17-2010, 11:41 PM	#509
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ Oh I thought it was one of your blocks!

02-18-2010, 08:59 AM	#510
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: And so it begins................ No, i have a ready to go 4 bolt bored .030 over, decked an line honed for the 62 Now i have about 3 TBI blocks laying around, numerous oil pans and valve covers, timing covers, heads, rods and even a couple BBC parts, its my personal iron junk yard __________________ Scott 93 crew cab build Project 62

02-18-2010, 10:30 AM	#511
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ So you're saying if I went with another 1 piece rear seal you could fix me up?

02-19-2010, 12:21 AM	#512
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: And so it begins................ no not that one good try though I know a guy that made a 383 out of a stock TBI engine 2 bolt main, it was a torky little dude for what it was __________________ Scott 93 crew cab build Project 62

02-19-2010, 12:41 AM	#513
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ Oh, all of your TBI blocks are 2bolt?

02-19-2010, 08:38 AM	#514
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: And so it begins................ What does it cost to convert a 2 bolt over to a 4 bolt? I know I have read about it somewhere. __________________ *CHEVY ONLY*

02-19-2010, 11:54 AM	#517
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ I just need to find a truck motor that isn't running anymore and haul it off for someone. I'm just sayin.............. Last edited by highperf4x4; 02-19-2010 at 11:55 AM.

02-20-2010, 12:01 AM	#519
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ Well, I have a line on couple from craigslist but they're either bored already or complete motors they don't want to part out. I've picked up good deals on them over the years. One will slide around sooner or later if you boys just keep your eyes peeled. Last edited by highperf4x4; 02-20-2010 at 12:01 AM.

02-20-2010, 12:45 AM	#520
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: And so it begins................ Worked at the machine shop today and bored 3 blocks for him, some change of scenery and made a few bucks. I asked him but he doesnt have one but he knows a guy that has one but thinks it has to go .060 over so thats out but ill keep a look out. He is in need of an old style virgin block if you happen to come across one. __________________ Scott 93 crew cab build Project 62

02-20-2010, 01:30 AM	#521
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ Does he want a 4bolt or does it matter?

02-20-2010, 01:31 AM	#522
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: And so it begins................ Doesnt matter, the guy that wants him to build the thing wants a .030 block when done. __________________ Scott 93 crew cab build Project 62



Register or Log In To remove these advertisements.

02-20-2010, 01:46 AM	#523
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ Ok, I'll keep an eye out.

02-20-2010, 01:54 AM	#524
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: And so it begins................ Cool thanks I have a 4.3 you can stroke and put in the truck! __________________ Scott 93 crew cab build Project 62

Register or Log In To remove these advertisements.