D52 Caliper Rear Disc Brake Brackets - Page 21 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Captainfab** · 03-25-2018, 11:19 PM

I appreciate the feedback. That's the only wayI know if something isn't fitting correctly. I will check into the dimensional issue with the spacers. Yes they are cut with a 400 amp high def plasma on a Kinetic table. That is why they have a little taper to the cut.

UATahoe · 04-11-2018, 10:14 AM

Interested in a set of these brackets. Any changes necessary referencing the above?

**Captainfab** · 04-11-2018, 11:48 PM

I have started checking the cut taper on the spacers and correcting if needed.

Quote:

Originally Posted by UATahoe

Interested in a set of these brackets. Any changes necessary referencing the above?

Rojas84 · 04-16-2018, 01:16 AM

Any thing for 88-98 available??

**Captainfab** · 04-16-2018, 11:32 PM

Sorry no, not yet. I still can't get all these local people to leave me alone so that I can work on new products and installation instructions. Which differential and what size of original drum brakes do you have?

Quote:

Originally Posted by Rojas84

Any thing for 88-98 available??

Rojas84 · 04-17-2018, 10:55 AM

10 bolt with 10 inch drums 3.556 x 2.840 backing plate
Mounting pattern 3.078 tubing od

UATahoe · 05-03-2018, 10:27 AM

Will be sending over funds for my brackets today. Thanks!

**Captainfab** · 05-03-2018, 11:41 PM

I have not received a payment from you today. Are you sure you sent it to the correct email address?

Quote:

Originally Posted by UATahoe

Will be sending over funds for my brackets today. Thanks!

UATahoe · 05-04-2018, 09:48 AM

Sorry Cap, got tied up with work yesterday and forgot to send. Sending it now. Thanks!

UATahoe · 05-04-2018, 12:26 PM

Should see the payment now. Thanks again Cap! Hope to actually get these on this time. LOL

**Captainfab** · 05-05-2018, 01:17 AM

Payment received. I will get a set over to the powder coaters on Monday.

Jreedsac · 05-05-2018, 10:30 PM

I sent you a PM Captainfab

**Captainfab** · 05-06-2018, 12:03 AM

I replied to your PM.

Quote:

Originally Posted by Jreedsac

I sent you a PM Captainfab

Jreedsac · 05-07-2018, 10:38 PM

Check your PM. I need your address!

**Captainfab** · 05-07-2018, 11:20 PM

Please be patient. I work 80hrs/7 days a week every week every month. I only have time to log onto this forum after I get home from my day of work. I replied to your PM.

Quote:

Originally Posted by Jreedsac

Check your PM. I need your address!

Tash4 · 06-23-2018, 10:52 PM

I'm interested in a set of brackets for a 10 bolt out of a 87 r10. What do you need to know ?
Posted via Mobile Device

**Captainfab** · 06-23-2018, 10:59 PM

To place an order you just need to make the payment. I will send you a PM.

Quote:

Originally Posted by Tash4

I'm interested in a set of brackets for a 10 bolt out of a 87 r10. What do you need to know ?
Posted via Mobile Device

Tash4 · 07-06-2018, 01:22 PM

Received parts , they are well made & fit perfect. Thanks
Posted via Mobile Device

**Captainfab** · 07-07-2018, 12:21 AM

Thanks for the compliments

Beardedwon · 08-29-2018, 07:22 PM

Quote:

Originally Posted by Captainfab

Thanks for the compliments

PM sent for some rear disc brackets

**Captainfab** · 08-29-2018, 11:44 PM

I replied to both of your PM's........

Beardedwon · 08-29-2018, 11:47 PM

Quote:

Originally Posted by Captainfab

I replied to both of your PM's........

Back at ya for PayPal. Thank you sir!
Posted via Mobile Device

PhilaTruck · 05-22-2019, 07:08 PM

Hi Captain: I'm having Moser turn a custom set of axles for my 90 burb rear and was planning to use 5x4.75 to have more wheels options. Do you foresee any issues getting 5x4.75 rotors to fit "truck" calipers?

I have a set of brackets cut off a race car that we were going to weld on, but I think your brackets may just be a lot easier in the long run.

Thanks-

**Captainfab** · 05-22-2019, 11:18 PM

There is no such thing as a rotor with the 5 x 4.75" wheel stud pattern that is a direct interchange with the Astro van rotor. There are 2 options. 1) drill the 5 x 4.75" hole pattern in the Astro van rotors in between the 5 x 5 pattern. 2) purchase the set of brackets that I make specifically for the 5 x 4.75" pattern. I do not have a for sale thread for them but they are pretty much the same as these brackets that I make for the 6 lug.

http://www.67-72chevytrucks.com/vboa...d.php?t=637489

Quote:

Originally Posted by PhilaTruck

Hi Captain: I'm having Moser turn a custom set of axles for my 90 burb rear and was planning to use 5x4.75 to have more wheels options. Do you foresee any issues getting 5x4.75 rotors to fit "truck" calipers?

I have a set of brackets cut off a race car that we were going to weld on, but I think your brackets may just be a lot easier in the long run.

Thanks-

PhilaTruck · 05-23-2019, 01:39 PM

Thanks for the info. Option 2 sounds better to me. I forgot to mention one IMPORTANT detail.

I'm planning to install c-clip eliminators. Would they affect fitment?

03-25-2018, 11:19 PM	#1
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: D52 Caliper Rear Disc Brake Brackets I appreciate the feedback. That's the only wayI know if something isn't fitting correctly. I will check into the dimensional issue with the spacers. Yes they are cut with a 400 amp high def plasma on a Kinetic table. That is why they have a little taper to the cut. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

04-11-2018, 10:14 AM	#2
UATahoe Registered User Join Date: Mar 2012 Location: Huntsville, AL Posts: 1,000	Re: D52 Caliper Rear Disc Brake Brackets Interested in a set of these brackets. Any changes necessary referencing the above?

04-16-2018, 01:16 AM	#4
Rojas84 Registered User Join Date: Jul 2016 Location: Mounds view MN Posts: 5	Re: D52 Caliper Rear Disc Brake Brackets Any thing for 88-98 available??

04-17-2018, 10:55 AM	#6
Rojas84 Registered User Join Date: Jul 2016 Location: Mounds view MN Posts: 5	Re: D52 Caliper Rear Disc Brake Brackets 10 bolt with 10 inch drums 3.556 x 2.840 backing plate Mounting pattern 3.078 tubing od

05-03-2018, 10:27 AM	#7
UATahoe Registered User Join Date: Mar 2012 Location: Huntsville, AL Posts: 1,000	Re: D52 Caliper Rear Disc Brake Brackets Will be sending over funds for my brackets today. Thanks!

05-04-2018, 09:48 AM	#9
UATahoe Registered User Join Date: Mar 2012 Location: Huntsville, AL Posts: 1,000	Re: D52 Caliper Rear Disc Brake Brackets Sorry Cap, got tied up with work yesterday and forgot to send. Sending it now. Thanks!

05-04-2018, 12:26 PM	#10
UATahoe Registered User Join Date: Mar 2012 Location: Huntsville, AL Posts: 1,000	Re: D52 Caliper Rear Disc Brake Brackets Should see the payment now. Thanks again Cap! Hope to actually get these on this time. LOL

05-05-2018, 01:17 AM	#11
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: D52 Caliper Rear Disc Brake Brackets Payment received. I will get a set over to the powder coaters on Monday. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

05-05-2018, 10:30 PM	#12
Jreedsac Registered User Join Date: Aug 2017 Location: Dawsonville Posts: 9	Re: D52 Caliper Rear Disc Brake Brackets I sent you a PM Captainfab

05-07-2018, 10:38 PM	#14
Jreedsac Registered User Join Date: Aug 2017 Location: Dawsonville Posts: 9	Re: D52 Caliper Rear Disc Brake Brackets Check your PM. I need your address!

06-23-2018, 10:52 PM	#16
Tash4 Registered User Join Date: Sep 2016 Location: Pinhook Mo Posts: 120	Re: D52 Caliper Rear Disc Brake Brackets I'm interested in a set of brackets for a 10 bolt out of a 87 r10. What do you need to know ? Posted via Mobile Device

07-06-2018, 01:22 PM	#18
Tash4 Registered User Join Date: Sep 2016 Location: Pinhook Mo Posts: 120	Re: D52 Caliper Rear Disc Brake Brackets Received parts , they are well made & fit perfect. Thanks Posted via Mobile Device

07-07-2018, 12:21 AM	#19
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: D52 Caliper Rear Disc Brake Brackets Thanks for the compliments __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

08-29-2018, 11:44 PM	#21
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: D52 Caliper Rear Disc Brake Brackets I replied to both of your PM's........ __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

05-22-2019, 07:08 PM	#23
PhilaTruck Right on the line, baby! Join Date: Oct 2003 Location: Phila, PA 19130 Posts: 1,486	Re: D52 Caliper Rear Disc Brake Brackets Hi Captain: I'm having Moser turn a custom set of axles for my 90 burb rear and was planning to use 5x4.75 to have more wheels options. Do you foresee any issues getting 5x4.75 rotors to fit "truck" calipers? I have a set of brackets cut off a race car that we were going to weld on, but I think your brackets may just be a lot easier in the long run. Thanks- __________________ 83 GMC 406 th400/3.73 Eaton Truetrac posi, headers, x pipe, & racePros. Tubular control arms, lowering rear springs, caltracs. Still ugly, but getting built right, although slowly Click and scroll down for site vendors! Subscribe here!



Register or Log In To remove these advertisements.

05-23-2019, 01:39 PM	#25
PhilaTruck Right on the line, baby! Join Date: Oct 2003 Location: Phila, PA 19130 Posts: 1,486	Re: D52 Caliper Rear Disc Brake Brackets Thanks for the info. Option 2 sounds better to me. I forgot to mention one IMPORTANT detail. I'm planning to install c-clip eliminators. Would they affect fitment? __________________ 83 GMC 406 th400/3.73 Eaton Truetrac posi, headers, x pipe, & racePros. Tubular control arms, lowering rear springs, caltracs. Still ugly, but getting built right, although slowly Click and scroll down for site vendors! Subscribe here!

Register or Log In To remove these advertisements.