68 project - Page 21 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**GR8-68** · 03-14-2017, 01:00 PM

Parati semper ad pugnam

**GR8-68** · 03-14-2017, 01:00 PM

Thank you Lorne

Oregon 1967 GMC · 03-15-2017, 08:36 PM

Just got caught up a bit....Wow! You're taking it to another level. Getting near the end but then again, does it ever really end? Have a blast with it.

**GR8-68** · 03-16-2017, 05:37 AM

Hopefully I can get the cab off this Saturday and begin to finish it up, after I take the dog to the rabies clinic of course

I am not sure it ever ends, of course I have the 72 Highlander to start if it all works out.

My goal is to get the cab done this month and actually start assembly on it. Panel fitment takes a good bit of time and patience though

rusty76 · 03-16-2017, 06:23 PM

You didn't bite the dog did you? Just kidding hope the dog is good. Pull that cab and make way.

**GR8-68** · 03-17-2017, 06:32 AM

Quote:

Originally Posted by rusty76

You didn't bite the dog did you? Just kidding hope the dog is good. Pull that cab and make way.

No, just that time and they have a rabies clinic tomorrow at tractor supply in Oak Ridge, only 20.00

He is too big to bite anyways

**GR8-68** · 03-17-2017, 05:02 PM

Had to remove a door skin, just had to see how long it would take to remove one.

cknfrmr · 03-17-2017, 05:20 PM

you should have let me know. I have all the door work/experiment you could ever want either side. Especially drivers side mine has a huge dent in it. lol

**GR8-68** · 03-17-2017, 06:27 PM

Bring it on, I can help you get hooked up on a set of worked doors

**GR8-68** · 03-17-2017, 06:34 PM

ROLLER !!!

cknfrmr · 03-17-2017, 07:12 PM

Quote:

Originally Posted by GR8-68

Bring it on, I can help you get hooked up on a set of worked doors

will do. after you get yours done for sure. don't want to put you behind schedule.

rusty76 · 03-17-2017, 07:42 PM

Quote:

Originally Posted by GR8-68

ROLLER !!!

The background is perfect. Palm trees, volcanoes and water. Lol.

**GR8-68** · 03-17-2017, 08:25 PM

You like my back drop don't you?

**GR8-68** · 03-17-2017, 08:28 PM

You won't put me behind Robert, I need to practice on yours before I attempt mine.

cknfrmr · 03-17-2017, 08:49 PM

I have two spare doors that need the bottoms repaired that I picked up a few months back. The guy was almost giving them away. Also came with aftermarket bottoms. Will bring them by and let you check them out and see what you think.

MMcMasters · 03-17-2017, 09:10 PM

Congrats Larry!!

**GR8-68** · 03-17-2017, 09:27 PM

Thanks Mike, hopefully soon I will be driving it.

Bring them on over Robert and we will check them out.

**GR8-68** · 03-18-2017, 09:56 AM

Elijah was a good boy for his shots this morning so he got a prize, a big ole pork bone.

rusty76 · 03-18-2017, 11:44 AM

Good dog.

**GR8-68** · 03-18-2017, 02:20 PM

Smoothing out the fire wall

**GR8-68** · 03-18-2017, 02:45 PM

**GR8-68** · 03-18-2017, 04:01 PM

Attempt at door repair, these door bottoms are crappy. I got these years ago hopefully they have started stamping them better.

cknfrmr · 03-18-2017, 04:27 PM

working that talent as usual. you have a one of a kind master piece on your hands for sure. I cant believe the transformation it has went through since I first got the cross member from you about a year ago.

**GR8-68** · 03-18-2017, 05:29 PM

Thank you Robert.

rusty76 · 03-18-2017, 05:58 PM

Door work is looking good. Little trim here. A little fix there.

03-14-2017, 01:00 PM	#501
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project Parati semper ad pugnam __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

03-14-2017, 01:00 PM	#502
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project Thank you Lorne __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

03-15-2017, 08:36 PM	#503
Oregon 1967 GMC Registered User Join Date: Jan 2014 Location: Portland, Oregon Posts: 436	Re: 68 project Just got caught up a bit....Wow! You're taking it to another level. Getting near the end but then again, does it ever really end? Have a blast with it. __________________ Hey man 67 GMC Short Stepside 400 small block, turbo 350. Build thread:http://67-72chevytrucks.com/vboard/s...d.php?t=650603

03-16-2017, 05:37 AM	#504
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project Hopefully I can get the cab off this Saturday and begin to finish it up, after I take the dog to the rabies clinic of course I am not sure it ever ends, of course I have the 72 Highlander to start if it all works out. My goal is to get the cab done this month and actually start assembly on it. Panel fitment takes a good bit of time and patience though __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

03-16-2017, 06:23 PM	#505
rusty76 Registered User Join Date: Sep 2012 Location: Midway, NC Posts: 3,275	Re: 68 project You didn't bite the dog did you? Just kidding hope the dog is good. Pull that cab and make way. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC

03-17-2017, 05:02 PM	#507
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project Had to remove a door skin, just had to see how long it would take to remove one. Attached Images __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

03-17-2017, 05:20 PM	#508
cknfrmr Registered User Join Date: Apr 2015 Location: kernersville,NC Posts: 197	Re: 68 project you should have let me know. I have all the door work/experiment you could ever want either side. Especially drivers side mine has a huge dent in it. lol

03-17-2017, 06:27 PM	#509
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project Bring it on, I can help you get hooked up on a set of worked doors __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

03-17-2017, 06:34 PM	#510
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project ROLLER !!! Attached Images __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

03-17-2017, 08:25 PM	#513
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project You like my back drop don't you? __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

03-17-2017, 08:28 PM	#514
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project You won't put me behind Robert, I need to practice on yours before I attempt mine. __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

03-17-2017, 08:49 PM	#515
cknfrmr Registered User Join Date: Apr 2015 Location: kernersville,NC Posts: 197	Re: 68 project I have two spare doors that need the bottoms repaired that I picked up a few months back. The guy was almost giving them away. Also came with aftermarket bottoms. Will bring them by and let you check them out and see what you think.

03-17-2017, 09:10 PM	#516
MMcMasters Registered User Join Date: Dec 2012 Location: Rochester, IL Posts: 537	Re: 68 project Congrats Larry!! __________________ __________________ Mike 70 Med Olive build http://67-72chevytrucks.com/vboard/s...d.php?t=714804 Instagram- protouring66

03-17-2017, 09:27 PM	#517
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project Thanks Mike, hopefully soon I will be driving it. Bring them on over Robert and we will check them out. __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

03-18-2017, 09:56 AM	#518
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project Elijah was a good boy for his shots this morning so he got a prize, a big ole pork bone. Attached Images __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant



Register or Log In To remove these advertisements.

03-18-2017, 11:44 AM	#519
rusty76 Registered User Join Date: Sep 2012 Location: Midway, NC Posts: 3,275	Re: 68 project Good dog. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC

03-18-2017, 02:20 PM	#520
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project Smoothing out the fire wall Attached Images __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

03-18-2017, 02:45 PM	#521
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project Attached Images __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

03-18-2017, 04:01 PM	#522
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project Attempt at door repair, these door bottoms are crappy. I got these years ago hopefully they have started stamping them better. Attached Images __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

03-18-2017, 04:27 PM	#523
cknfrmr Registered User Join Date: Apr 2015 Location: kernersville,NC Posts: 197	Re: 68 project working that talent as usual. you have a one of a kind master piece on your hands for sure. I cant believe the transformation it has went through since I first got the cross member from you about a year ago.

03-18-2017, 05:29 PM	#524
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 68 project Thank you Robert. Attached Images __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

03-18-2017, 05:58 PM	#525
rusty76 Registered User Join Date: Sep 2012 Location: Midway, NC Posts: 3,275	Re: 68 project Door work is looking good. Little trim here. A little fix there. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC

Register or Log In To remove these advertisements.