What did you do to your truck today! - Page 211 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shawno72 · 11-01-2012, 04:02 PM

Quote:

Originally Posted by willys72fleetside

Finally got the rest of my engine parts to get it back together

Looking really good!!

mud.man.rj · 11-01-2012, 07:09 PM

That s such a nice seat Vdog, really nice.

VDOG · 11-01-2012, 07:36 PM

Quote:

Originally Posted by mud.man.rj

That s such a nice seat Vdog, really nice.

LOL!! Thats "Its Randys" seat, I was just commenting on it. LOL

Now on the other hand, I touched up my grille. Now to polish it up.

mud.man.rj · 11-01-2012, 09:22 PM

Haha, oh nice grill too Vdog...but the seat rocks.

ole dollor · 11-01-2012, 09:36 PM

a little time and black paint makes a big difference on your grill.....good job...looks great.

and randy that is a real nice job on your seat to.....

54belair · 11-01-2012, 10:01 PM

Today, I finally took the time to actually put the cab on the rotissary. (Been sitting beside the rotissary for over a month--every morning I look and sure enough - no elves showed up over nite to put it On the rig.

Now I can quit working on the top side and flip it to finish up the bottom. I just doubled my work load----now I can work the chassis and the cab!!

Country_Boy_2007 · 11-01-2012, 11:21 PM

Quote:

Originally Posted by 54belair

Today, I finally took the time to actually put the cab on the rotissary. (Been sitting beside the rotissary for over a month--every morning I look and sure enough - no elves showed up over nite to put it On the rig.

Now I can quit working on the top side and flip it to finish up the bottom. I just doubled my work load----now I can work the chassis and the cab!!

Lol seems like you have the same problem as i do, those damn elves keep skippin my shop too.

jd7 · 11-01-2012, 11:56 PM

I put in a new ignition switch, I picked up my grill from the polisher, [ full restoration including re-anodize ] bought a comp cam vac canister,also bought an msd ignition system.

ItsRandy · 11-02-2012, 12:30 AM

Quote:

Originally Posted by VDOG

Randy the seat and door panel look great. So my friend what do you really have left to do, your almost done right? Also I cleaned up the grille and im getting ready to repaint the black lines and lettering.

Still have to finish the bed (wood), spray the tail gate finish the rear wheel tubes and color sand the truck.

VDOG · 11-02-2012, 12:40 PM

Oh you still have a lot. Holla if you need some help.

**FRENCHBLUE72** · 11-02-2012, 12:52 PM

Im just cleaning up around mine today..

jd7 · 11-03-2012, 12:00 AM

Quote:

Originally Posted by jd7

I put in a new ignition switch, I picked up my grill from the polisher, [ full restoration including re-anodize ] bought a comp cam vac canister,also bought an msd ignition system.

hope this works

**nlped** · 11-03-2012, 03:30 PM

More than one day, but I finally got all the original suspension & brake stuff off and replaced it with all new or rebuilt pieces.

McGaughy 13" Disk Brake kits F&R, new stainless brake hardlines and softlines (Inlinetube.com), CPP 4 wheel disc M/C & P/V, '76 upper & lower control arms with Moog bushings & ball joints, '76 steering parts (all new Moog pieces), Ground Force 1" drop front drop coil springs.

Rear is a built '88 12 bolt with an Auburn diff, 3.42's, new bearing/seals etc, and machined axles (to fit the McGaughy brake rotor hat), ECE rear shock relocation kit (thanks CC69Rat), and CPP rear deluxe bent panhard bar and rear drop coils, Total drop is 3.5" in the front and 4" in the rear. I didn't want it to be crazy low because I'm gonna use it a good bit. The wheels are 1st Gen Boss 338's...Front's=18x8" with 255/50r18 Toyo ST's, Rear's=18x9.5" 295/45r18 Toyo ST's.

PAWS 72 · 11-03-2012, 10:28 PM

Put gas in bessie,went to cruis inn and got my butt wet before i got home.

69GWC · 11-03-2012, 11:01 PM

Installed a new turn signal switch and got my brake lights working again.

Posted via Mobile Device

74baggedbug · 11-04-2012, 02:34 AM

Installed my new rear window , adds a lot of circulation to the cab when I remove the rear window
Posted via Mobile Device

**Palf70Step** · 11-04-2012, 08:21 AM

That is neat. I don't think I have ever seen a rear window setup like that.

**Boog** · 11-04-2012, 09:45 AM

^^^^ Same here. Care to share some info on it?

74baggedbug · 11-04-2012, 11:40 AM

Quote:

Originally Posted by Boog

^^^^ Same here. Care to share some info on it?

Me and another forum member had them made, this is the 1st one the company has ever made for our trucks , I need to talk to the owner on Monday and tell him what I think of it and the design. He may want to change a few things but that will be up to him. I didn't want a slider rear windshield nor would I hack up my truck to install a powers sliding glass like some old vehicles have .. I'm surprised of the response I've gotten so far about the window hopefully we will see more of them thanks
Posted via Mobile Device

**Hart_Rod** · 11-04-2012, 12:17 PM

Quote:

Originally Posted by 74baggedbug

Installed my new rear window , adds a lot of circulation to the cab when I remove the rear window
Posted via Mobile Device

That's pretty cool!
Posted via Mobile Device

Razor454 · 11-04-2012, 12:34 PM

I cut out my old "heater" dash last night and I'm planning to media blast the modified AC dash today.

sduckworth13 · 11-04-2012, 01:43 PM

Nice Job Mark

ole dollor · 11-04-2012, 01:47 PM

i also would like to know more on your back window....looks nice.

80sbaby 209 · 11-05-2012, 04:11 AM

i built my passenger door panel today got a late start ill have the drivers done by next weekend http://67-72chevytrucks.com/vboard/a...1&d=1352102997

80sbaby 209 · 11-05-2012, 04:14 AM

http://67-72chevytrucks.com/vboard/a...1&d=1352103233

11-01-2012, 07:09 PM	#5252
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: What did you do to your truck today! That s such a nice seat Vdog, really nice.

11-01-2012, 09:22 PM	#5254
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: What did you do to your truck today! Haha, oh nice grill too Vdog...but the seat rocks.

11-01-2012, 09:36 PM	#5255
ole dollor Registered User Join Date: May 2012 Location: Anton, Texas Posts: 2,364	Re: What did you do to your truck today! a little time and black paint makes a big difference on your grill.....good job...looks great. and randy that is a real nice job on your seat to.....

11-01-2012, 10:01 PM	#5256
54belair Registered User Join Date: Mar 2011 Location: bolivar, mo Posts: 839	Re: What did you do to your truck today! Today, I finally took the time to actually put the cab on the rotissary. (Been sitting beside the rotissary for over a month--every morning I look and sure enough - no elves showed up over nite to put it On the rig. Now I can quit working on the top side and flip it to finish up the bottom. I just doubled my work load----now I can work the chassis and the cab!! Attached Images __________________ 1997 shortie stepside 1968 short stepside 1966 mustang 1966 chevelle ss Dont always go the cheapest route--You can save yourself into the poorhouse! My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=489030

11-01-2012, 11:56 PM	#5258
jd7 Registered User Join Date: Sep 2012 Location: canoga park, ca. Posts: 120	Re: What did you do to your truck today! I put in a new ignition switch, I picked up my grill from the polisher, [ full restoration including re-anodize ] bought a comp cam vac canister,also bought an msd ignition system.

11-02-2012, 12:40 PM	#5260
VDOG Grand PooBaa Member Join Date: Jan 2001 Location: LA, CA Posts: 5,302	Re: What did you do to your truck today! Oh you still have a lot. Holla if you need some help.

11-02-2012, 12:52 PM	#5261
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: What did you do to your truck today! Im just cleaning up around mine today.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-03-2012, 03:30 PM	#5263
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: What did you do to your truck today! More than one day, but I finally got all the original suspension & brake stuff off and replaced it with all new or rebuilt pieces. McGaughy 13" Disk Brake kits F&R, new stainless brake hardlines and softlines (Inlinetube.com), CPP 4 wheel disc M/C & P/V, '76 upper & lower control arms with Moog bushings & ball joints, '76 steering parts (all new Moog pieces), Ground Force 1" drop front drop coil springs. Rear is a built '88 12 bolt with an Auburn diff, 3.42's, new bearing/seals etc, and machined axles (to fit the McGaughy brake rotor hat), ECE rear shock relocation kit (thanks CC69Rat), and CPP rear deluxe bent panhard bar and rear drop coils, Total drop is 3.5" in the front and 4" in the rear. I didn't want it to be crazy low because I'm gonna use it a good bit. The wheels are 1st Gen Boss 338's...Front's=18x8" with 255/50r18 Toyo ST's, Rear's=18x9.5" 295/45r18 Toyo ST's. Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

11-03-2012, 10:28 PM	#5264
PAWS 72 Registered User Join Date: Nov 2011 Location: Sheffield, ALA Posts: 2,471	Re: What did you do to your truck today! Put gas in bessie,went to cruis inn and got my butt wet before i got home.

11-03-2012, 11:01 PM	#5265
69GWC Registered User Join Date: Jun 2012 Posts: 1,089	Re: What did you do to your truck today! Installed a new turn signal switch and got my brake lights working again. Posted via Mobile Device

11-04-2012, 02:34 AM	#5266
74baggedbug Registered User Join Date: Oct 2011 Location: Houston tx Posts: 699	Re: What did you do to your truck today! Installed my new rear window , adds a lot of circulation to the cab when I remove the rear window Posted via Mobile Device

11-04-2012, 08:21 AM	#5267
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,746	Re: What did you do to your truck today! That is neat. I don't think I have ever seen a rear window setup like that. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-04-2012, 09:45 AM	#5268
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,039	Re: What did you do to your truck today! ^^^^ Same here. Care to share some info on it? __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

11-04-2012, 12:34 PM	#5271
Razor454 Registered User Join Date: Feb 2004 Location: Stokesdale, North Carolina Posts: 341	Re: What did you do to your truck today! I cut out my old "heater" dash last night and I'm planning to media blast the modified AC dash today. Attached Images __________________ 1967 SwB, 454 BB, 4L80E trans, 3.73 eaton posi 1997 C2500 Ext Cab 5.7 Liter 1955 3/4 ton 1st series w/ 235 straight six Sold it Last edited by Razor454; 11-04-2012 at 01:00 PM.

11-04-2012, 01:43 PM	#5272
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: What did you do to your truck today! Nice Job Mark __________________ Scott



Register or Log In To remove these advertisements.

11-04-2012, 01:47 PM	#5273
ole dollor Registered User Join Date: May 2012 Location: Anton, Texas Posts: 2,364	Re: What did you do to your truck today! i also would like to know more on your back window....looks nice.

11-05-2012, 04:11 AM	#5274
80sbaby 209 Registered User Join Date: Nov 2012 Location: stockton ca Posts: 5	Re: What did you do to your truck today! i built my passenger door panel today got a late start ill have the drivers done by next weekend http://67-72chevytrucks.com/vboard/a...1&d=1352102997

11-05-2012, 04:14 AM	#5275
80sbaby 209 Registered User Join Date: Nov 2012 Location: stockton ca Posts: 5	Re: What did you do to your truck today! http://67-72chevytrucks.com/vboard/a...1&d=1352103233 Attached Images

Register or Log In To remove these advertisements.