Crossmember Drop - Page 22 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

grnddwn · 12-01-2004, 10:55 AM

That's a nice set-up. I think the rod ends on the control arms might make for a harsh ride though, but it should handle really well.

**N2TRUX** · 12-02-2004, 09:35 AM

Here's another one. This is a Morrison set up....

Bagd72Chevy · 12-05-2004, 02:44 PM

What is the problem with the stock steering, what is binding up, only allowing you to do a 1.5 inch crossmember drop on stock stuff?

SCOTI · 12-05-2004, 06:53 PM

Quote:

Originally Posted by Bagd72Chevy

What is the problem with the stock steering, what is binding up, only allowing you to do a 1.5 inch crossmember drop on stock stuff?

Yep. After about a 1.5" notch, you get very close to the tie-rods hitting the lower a-arm mounting hardware & clearance issues trying to clear the upper a-arm w/the steering shaft. More than a 1.5" drop w/add even more difficulty.

Bagd72Chevy · 12-05-2004, 10:04 PM

With tubular arms, would a 1.5 inch crossmember drop be ok?

**Captkaos** · 12-06-2004, 12:24 AM

Quote:

Originally Posted by Bagd72Chevy

With tubular arms, would a 1.5 inch crossmember drop be ok?

Yes tubular will be perfectly fine with the 1.5 drop.

Bagd72Chevy · 12-06-2004, 02:51 AM

How much should I be looking to pay for a crossmember? Also is it hard to take out?

A Pull it yourself junkyard is like 10 minutes from where I am right now. Just wondering how much I should be looking to pay, and how hard is to get out. Also how heavy is a crossmember?

**Captkaos** · 12-06-2004, 05:20 PM

A stock one? They charge me $75 for the ones I have gotten. This is JUST the crossmember though.

grnddwn · 12-06-2004, 06:29 PM

aROUD HERE WE PAY 100 BUT THATS CANADIAN

Chris~GS · 12-09-2004, 12:07 PM

So i have read all this, and i have one question, which is better, a "Z" or a sectioned crossmember????? I am confused

phantom dually · 12-09-2004, 09:53 PM

FYI I have posted all my crossmember items for sale in the 73-87 parts forum. Thanks!!

phantom dually · 01-10-2005, 08:04 PM

Ttt

bagged72blaz · 01-11-2005, 07:47 PM

Err can this get any longer? How about writing a book!

I'm scared to ask a question without spending hours reading to see if it's been asked!

phantom dually · 01-11-2005, 11:20 PM

Ask anything you want!! Im sure it isnt the first time.

bagged72blaz · 01-13-2005, 03:26 PM

Ok Would it be true to say with a crossmember drop it wouldn't effect ground clearance under the arms? your just bringing the frame closer to the ground right?

fastbagged68 · 01-13-2005, 04:32 PM

Correct!

Truckhead · 01-19-2005, 07:50 PM

So what's a crossmember?

LOL I'm joking.

phantom dually · 01-19-2005, 10:10 PM

Are you just trying to run up your post count??

sixty8c10 · 01-19-2005, 10:43 PM

thats what it sounds like to me

loweredd · 01-25-2005, 09:08 PM

Quote:

Originally Posted by Chris~GS

So i have read all this, and i have one question, which is better, a "Z" or a sectioned crossmember????? I am confused

I think it depends on your overall tire size Chris~GS. With the large diameter wheel tire combo I have, I needed to do a Z.

phantom dually · 06-07-2005, 10:22 PM

So has anyone actually ever got one of these membersi n and complete?? If so post a pic here and we can be done with this thread forever. Boy I sure wasted alot of time in this one!!

SCOTI · 06-07-2005, 11:21 PM

I know Slammed67 did a crossmember drop for XXL & Ken drove his truck back home. I believe thats how he managed to knock that small hole in his oil pan.

fastbagged68 · 06-08-2005, 01:10 AM

I am almost done! But I am doing full resto on my burban!

XXL · 06-08-2005, 09:16 AM

Quote:

Originally Posted by SCOTI

I know Slammed67 did a crossmember drop for XXL & Ken drove his truck back home. I believe thats how he managed to knock that small hole in his oil pan.

My xmember was made by Captkaos using a stock one and sectioning it. slammed67 did the installation. And, yes, it's done, and had lots of miles on it as a daily driver until I bought the Tahoe (so I could get more work done on the truck without having to rely on it or my wife for transportation).

fastbagged68 · 06-08-2005, 01:12 PM

I did my crossmember drop myself with Bill Turner Arms. I will get pics up soon! I have been working on my suburban every monday-thurs for the last 3 months! Almost there. Doing Brake lines and fuel lines tonight. Didn't know stainless could be so much! Get my shocks today. It is all starting to come together!

12-05-2004, 02:44 PM	#528
Bagd72Chevy C10 Collector Join Date: Oct 2003 Location: Baton Rouge, LA Posts: 417	interference What is the problem with the stock steering, what is binding up, only allowing you to do a 1.5 inch crossmember drop on stock stuff?

12-05-2004, 10:04 PM	#530
Bagd72Chevy C10 Collector Join Date: Oct 2003 Location: Baton Rouge, LA Posts: 417	arms With tubular arms, would a 1.5 inch crossmember drop be ok?

12-06-2004, 02:51 AM	#532
Bagd72Chevy C10 Collector Join Date: Oct 2003 Location: Baton Rouge, LA Posts: 417	crossmember How much should I be looking to pay for a crossmember? Also is it hard to take out? A Pull it yourself junkyard is like 10 minutes from where I am right now. Just wondering how much I should be looking to pay, and how hard is to get out. Also how heavy is a crossmember?

12-06-2004, 05:20 PM	#533
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	A stock one? They charge me $75 for the ones I have gotten. This is JUST the crossmember though. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

12-09-2004, 12:07 PM	#535
Chris~GS Registered User Join Date: Nov 2004 Posts: 18	So i have read all this, and i have one question, which is better, a "Z" or a sectioned crossmember????? I am confused __________________ Cut=Custom <<and that is the coolest smiley EVER

12-01-2004, 10:55 AM	#526
grnddwn belly dragger Join Date: Feb 2002 Location: sherwood park AB. Canada Posts: 696	That's a nice set-up. I think the rod ends on the control arms might make for a harsh ride though, but it should handle really well.

12-02-2004, 09:35 AM	#527
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Here's another one. This is a Morrison set up....

12-06-2004, 06:29 PM	#534
grnddwn belly dragger Join Date: Feb 2002 Location: sherwood park AB. Canada Posts: 696	aROUD HERE WE PAY 100 BUT THATS CANADIAN

12-09-2004, 09:53 PM	#536
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	FYI I have posted all my crossmember items for sale in the 73-87 parts forum. Thanks!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-10-2005, 08:04 PM	#537
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Ttt __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-11-2005, 07:47 PM	#538
bagged72blaz Got L.E.D.s Join Date: Dec 2004 Location: Craig Co. Posts: 195	Err can this get any longer? How about writing a book! I'm scared to ask a question without spending hours reading to see if it's been asked! __________________ Bagged 1972 2wd Blazer http://www.earlyclassic.com/home.aspx

01-11-2005, 11:20 PM	#539
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Ask anything you want!! Im sure it isnt the first time. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-13-2005, 03:26 PM	#540
bagged72blaz Got L.E.D.s Join Date: Dec 2004 Location: Craig Co. Posts: 195	Ok Would it be true to say with a crossmember drop it wouldn't effect ground clearance under the arms? your just bringing the frame closer to the ground right? __________________ Bagged 1972 2wd Blazer http://www.earlyclassic.com/home.aspx

01-13-2005, 04:32 PM	#541
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	Correct!

01-19-2005, 07:50 PM	#542
Truckhead 18436572 Join Date: Aug 2003 Location: Waynesboro, Va. Posts: 488	So what's a crossmember? LOL I'm joking.



Register or Log In To remove these advertisements.

01-19-2005, 10:10 PM	#543
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Are you just trying to run up your post count?? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-19-2005, 10:43 PM	#544
sixty8c10 MY EX DRIVES A BROOM Join Date: Nov 2003 Location: Herington, KS Posts: 869	thats what it sounds like to me __________________ They say nobody's perfect. I'm a nobody, so I must be perfect. Building Nemo -1968 C10 Long Bed FRED -1947 KB-2 International

06-07-2005, 10:22 PM	#546
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	So has anyone actually ever got one of these membersi n and complete?? If so post a pic here and we can be done with this thread forever. Boy I sure wasted alot of time in this one!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448 Last edited by phantom dually; 06-07-2005 at 10:22 PM.

06-07-2005, 11:21 PM	#547
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,919	I know Slammed67 did a crossmember drop for XXL & Ken drove his truck back home. I believe thats how he managed to knock that small hole in his oil pan. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 06-07-2005 at 11:26 PM.

06-08-2005, 01:10 AM	#548
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	I am almost done! But I am doing full resto on my burban!

06-08-2005, 01:12 PM	#550
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	I did my crossmember drop myself with Bill Turner Arms. I will get pics up soon! I have been working on my suburban every monday-thurs for the last 3 months! Almost there. Doing Brake lines and fuel lines tonight. Didn't know stainless could be so much! Get my shocks today. It is all starting to come together!

Register or Log In To remove these advertisements.