Starting 1966 Factory Short Bed Build, Bagged, 383 Stroker and Muncie M20 4-Speed

[88Stanger]

Update:

Ok so attached are the pics of the new mid-length Headers with re-used DEI header wrap - Shown are the tools I used -

[88Stanger]

more

[88Stanger]

so then I started on the Fuel lines
I am using PTFE Fuel line 3/8" with -6AN fittings - 30 Micron Fuel Filter - Pump is in the tank (Fuel Injection pump) - Reg will be mounted on the firewall later -
Bulkhead fittings shown

[88Stanger]

helps if i attach the pics... lol sorry

[88Stanger]

lol, yes the message on the tank is for my mother.

[roll_the_dice]

Looks good. The lines look very clean...like how you used the fitting through the frame!

[88Stanger]

Please forgive this post - Testing aspect ratios

There we go....

[88Stanger]

Originally Posted by roll_the_dice

Looks good. The lines look very clean...like how you used the fitting through the frame!

Thank you sir. It's been a lesrning curve, but i like to learn new things and i can be bit "anal" about this stuff. In like detail work

[88Stanger]

So today I was excited to go run the two lines from the back to the front inside the frame rail. I ordered a second PTFE fuel line for the return side and DAMNIT, I order normal steel braided line, not PTFE. Why the issue? The two are similar BUT the ends are not. So return and re-order I go...

[Paul Y]

Hear you on the PTFE lines.

Ordered around £400 worth of fittings, had a friend bring them back in their luggage for me and felt very smug that I had saved a load of cash....

Turns out I ordered rubber hose fittings not PTFE ones so half of them are now just expensive ornaments......

A note to Mum never needs explaining.

And!!! Pleased we finally get to see pictures of your handiwork.....

P.

[88Stanger]

Originally Posted by Paul Y

Hear you on the PTFE lines.

Ordered around £400 worth of fittings, had a friend bring them back in their luggage for me and felt very smug that I had saved a load of cash....

Turns out I ordered rubber hose fittings not PTFE ones so half of them are now just expensive ornaments......

A note to Mum never needs explaining.

And!!! Pleased we finally get to see pictures of your handiwork.....

P.

Oh no!! Ya damn that sucks. So i can tell you that i look for the flared ends on the fittings, like an umbrella. Nice to finally get it going again.. i miss this

[Braunschweiger]

Great work and so careful, I love it.

[88Stanger]

Originally Posted by Braunschweiger

Great work and so careful, I love it.

Thank you sir!! Appreciate your comments.

[88Stanger]

Ok, so got the return line and installed. Looks good for this rookie. Pics attached of progress...

[88Stanger]

Ok, so now for the question. I need to exit the inside frame rail and here is my plan. Exit with bulkhead fittings where i am pointing to. This will be just below the inner fender, then come up under/inside the inner fender to a point to notch the inner fender to exit from and go into the Fuel Pressure reg. then onto the Injection system. Thoughts on the plan?

[Paul Y]

Jeff.

I came up on the top of the chassis rather than on the outside.

Have a look at my build and you will see what I mean. If it works for you might be a consideration.

P.

[88Stanger]

Originally Posted by Paul Y

Jeff.

I came up on the top of the chassis rather than on the outside.

Have a look at my build and you will see what I mean. If it works for you might be a consideration.

P.

Yes sir, I was looking at that originally. If i am honest, the main reason thatI was looking at the side is the header clearance and how to route them up the firewall. This is all fair and good, but the other reason is that well i have to take the cab off again and not sure if i want to drill more holes in the frame vs using what is existing.

My dilemma .... this morning (my time .... lol) is clean out the storage shed and move front end parts from boxes to the shop for pre-assemble.

[88Stanger]

Ok, Yesterday I cleaned out/re-arranged my 10'x16' Old Hickory Storage Barn (Great company and cheaper than the other option). This is where I have all my parts for the build, when I say all the parts, I mean all the parts... every body/Bed panel, misc parts, you name it. Well that is ALOT of boxes, ALOT!! So at the point I am now I moved the front inner and out fenders and Rad support out of the shed, out of the boxes and into the shop. This and just misc cleaning has helped extremely with room. This allowed me to move alot of other items in the shop to the shed to free up alot of space. BECAUSE I need to remove the damn cab for just a min so that I can drill two holes for the darn fuel line bulkhead fittings up bye the front of where the cab meets the frame. Then I re-set the cab on and start all the test fitting of the front end and the arrangement of all the misc electronic equipmen - ie MSD 6A2 box, distribution block for electrical... and so on.
Moving forward with a backup here and there.... lol

[88Stanger]

So, all goes well I will have the Fuel line Bulkhead fittings installed up front, from the inside of the frame to the top of the frame, like my friend from across the pond did Paul Y. Thanks again for the pics on yours.
After that, it is installing the front inner fenders, outer fenders and Rad support for test fitting and alignment, then I need to line the inner fenders and underside of the outer fender with bed liner. Then paint in inner side of the fenders with Por 15 spray on black.
I also will be installing the Hydraulic clutch and Hydra-boost for test fitting and brake line routing. (Thanks to CaptainFab for the Hydraulic clutch and Hydra-boost mount and master Cylinder with correct rods to the clutch pedal!!

[Paul Y]

Rather refreshing to know that I have been able to provide an idea rather than shamelessly 'borrow' those from others.

P.

[88Stanger]

Originally Posted by Paul Y

Rather refreshing to know that I have been able to provide an idea rather than shamelessly 'borrow' those from others.

P.

Well it was a great idea! and I did it, see below for updated photos.

[88Stanger]

Ok, so on the idea from Paul Y and others, I finished the install of the Fuel and return lines. See pics and found a suitable location for the Pressure Reg.

[88Stanger]

More...

[88Stanger]

Ok now onto pics of CaptainFabs Hydra Brake Booster and Hydraulic Clutch Mount and associated parts. I have the main bracket mounted, just need to Drill the hole out (find the center before... should be fun) then test fit. Then start the brake line routes.

[88Stanger]

Note, the Red and Blue tape is there for me to know which is which... it will be removed.