What did you do to your truck today! - Page 267 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCHRUMGMC · 04-17-2013, 02:09 PM

Still planning on what I want to do

VDOG · 04-17-2013, 06:04 PM

Practice my frist weld on my spare parts cab. I have a long way
to go.

Scott>72-GMC · 04-17-2013, 06:27 PM

Quote:

Originally Posted by VDOG

Practice my frist weld on my spare parts cab. I have a long way
to go.

Grind grind grind try try try
Posted via Mobile Device

VDOG · 04-17-2013, 08:48 PM

Quote:

Originally Posted by Scott>72-GMC

Grind grind grind try try try
Posted via Mobile Device

Thanks Scott, will try again tomorrow when I have more time.

ryanroo · 04-17-2013, 08:51 PM

is that flux core?

buckskins4ever · 04-17-2013, 09:24 PM

I decided to redo the kick panels in black and finished the Air ride gauge/switch panel with ostrich and formed side panels to hide gauges and wiring. Also blasted the glove box door and hinges then powder coated.
I love this look better. Really finished the interior.

**special-K** · 04-17-2013, 09:44 PM

On my tow truck I swapped the later plastic rectangle lights on the boom tower with 67-72 Stepside/Cab & Chassis tail lamps (round) and put a Y.O.M. license plate on it.

VDOG · 04-18-2013, 01:05 PM

Quote:

Originally Posted by ryanroo

is that flux core?

Yes its flux core.

SCHRUMGMC · 04-18-2013, 01:06 PM

That interior is mind blowing

magwakeenercew2jh · 04-18-2013, 01:21 PM

Quote:

Originally Posted by buckskins4ever

I took the plunge and decided to list mine for sale. Got another toy in sight....and momma says one has to go before hand. Argh!!

Damn!!!!

Gokart Mozart · 04-18-2013, 01:46 PM

Quote:

Originally Posted by C10-Rat

Looked at the truck as I walked by.

Me too.

Over the weekend I did use it to pick up some outdoor furniture. Took out the old seat cover because it had bad dandruff. It was so old, I didn't need anything to pull it apart.

SCHRUMGMC · 04-18-2013, 02:16 PM

Stared at a photo of the Truck, waiting to get it Sunday....Hopefully

Lee H · 04-18-2013, 03:50 PM

Quote:

Originally Posted by SCHRUMGMC

Stared at a photo of the Truck, waiting to get it Sunday....Hopefully

Good luck! Let us know how that works out.

SCHRUMGMC · 04-18-2013, 04:31 PM

Thanks Lee, I am pulling my hair out over this

Lee H · 04-18-2013, 04:55 PM

Don't pull to much, your going to need all you can get once you get a little older!

SCHRUMGMC · 04-18-2013, 04:58 PM

Haha so very true man.Praying this goes as planned

oneoff · 04-18-2013, 07:45 PM

The core support and radiator is in. The A/C is hooked up. Serp belt on and a few more things and should be ready to test start this beast. I'm stoked!!! Ground up resto on the streets soon!!! here's the build thread!!
http://67-72chevytrucks.com/vboard/s...d.php?t=541803

Name: core support.jpg
Views: 533
Size: 43.2 KB

Name: core support.jpg
Views: 533
Size: 43.2 KB

Name: core support1.jpg
Views: 495
Size: 56.7 KB

Name: core support2.jpg
Views: 497
Size: 59.9 KB

SCHRUMGMC · 04-18-2013, 07:46 PM

Good work man ^

lghell · 04-18-2013, 10:29 PM

Finally got the pieces together

/Patrik
Posted via Mobile Device
Posted via Mobile Device

SCHRUMGMC · 04-18-2013, 10:52 PM

is there a certain way to clean those ^

**jkeating1** · 04-18-2013, 10:56 PM

Quote:

Originally Posted by oneoff

Attachment 1094671

Congratulations on a super clean build! Seein' those guys on the barstools, are you building that truck in a honky-tonk? Man, that's gearhead euphoria---bustin' knuckles, a waitress getting your drink order, and a live band wailing in the background!

**jkeating1** · 04-18-2013, 11:04 PM

Quote:

Originally Posted by lghell

Finally got the pieces together

/Patrik
Posted via Mobile Device
Posted via Mobile Device

excellent work! Where do you get the bearings, gaskets, snaprings, etc. in Sweden? And without O'Reilly's, Autozone, or Pep Boys---what do you do for aggravation?

lghell · 04-19-2013, 07:40 AM

Quote:

Originally Posted by jkeating1

excellent work! Where do you get the bearings, gaskets, snaprings, etc. in Sweden? And without O'Reilly's, Autozone, or Pep Boys---what do you do for aggravation?

Hey thx!
I have a local shop that have US car parts but I usually
buy from ebay

/Patrik
Posted via Mobile Device
Posted via Mobile Device

aventur1 · 04-19-2013, 08:16 AM

In your photo where the drive line hooks up, mine is leaking at the plate where it bolts up to the main housing. Anything special I need to know when I unbolt everything to install new gasket? What's the best gasket to buy?
Thanks

74baggedbug · 04-19-2013, 12:33 PM

Put my deposit down for Robert Lewis makeover to install my vintage air, I know a lot of people will say its easy to install but with working 60hrs to 84hrs a week and a family don't really have the time
Posted via Mobile Device

04-17-2013, 02:09 PM	#6651
SCHRUMGMC Registered User Join Date: Dec 2012 Location: North Carolina Posts: 4,989	Re: What did you do to your truck today! Still planning on what I want to do __________________ 1971 GMC Sierra 1959 GMC 100

04-17-2013, 06:04 PM	#6652
VDOG Grand PooBaa Member Join Date: Jan 2001 Location: LA, CA Posts: 5,302	Re: What did you do to your truck today! Practice my frist weld on my spare parts cab. I have a long way to go. Attached Images

04-17-2013, 08:51 PM	#6655
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: What did you do to your truck today! is that flux core? __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

04-17-2013, 09:24 PM	#6656
buckskins4ever Registered User Join Date: Dec 2012 Location: Altoona Iowa Posts: 481	Re: What did you do to your truck today! I decided to redo the kick panels in black and finished the Air ride gauge/switch panel with ostrich and formed side panels to hide gauges and wiring. Also blasted the glove box door and hinges then powder coated. I love this look better. Really finished the interior. Attached Images

04-17-2013, 09:44 PM	#6657
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: What did you do to your truck today! On my tow truck I swapped the later plastic rectangle lights on the boom tower with 67-72 Stepside/Cab & Chassis tail lamps (round) and put a Y.O.M. license plate on it. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-18-2013, 01:06 PM	#6659
SCHRUMGMC Registered User Join Date: Dec 2012 Location: North Carolina Posts: 4,989	Re: What did you do to your truck today! That interior is mind blowing __________________ 1971 GMC Sierra 1959 GMC 100

04-18-2013, 02:16 PM	#6662
SCHRUMGMC Registered User Join Date: Dec 2012 Location: North Carolina Posts: 4,989	Re: What did you do to your truck today! Stared at a photo of the Truck, waiting to get it Sunday....Hopefully __________________ 1971 GMC Sierra 1959 GMC 100

04-18-2013, 04:31 PM	#6664
SCHRUMGMC Registered User Join Date: Dec 2012 Location: North Carolina Posts: 4,989	Re: What did you do to your truck today! Thanks Lee, I am pulling my hair out over this __________________ 1971 GMC Sierra 1959 GMC 100

04-18-2013, 04:55 PM	#6665
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,141	Re: What did you do to your truck today! Don't pull to much, your going to need all you can get once you get a little older! __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

04-18-2013, 04:58 PM	#6666
SCHRUMGMC Registered User Join Date: Dec 2012 Location: North Carolina Posts: 4,989	Re: What did you do to your truck today! Haha so very true man.Praying this goes as planned __________________ 1971 GMC Sierra 1959 GMC 100

04-18-2013, 07:45 PM	#6667
oneoff Registered User Join Date: Jun 2011 Location: Parker Colorado Posts: 174	Re: What did you do to your truck today! The core support and radiator is in. The A/C is hooked up. Serp belt on and a few more things and should be ready to test start this beast. I'm stoked!!! Ground up resto on the streets soon!!! here's the build thread!! http://67-72chevytrucks.com/vboard/s...d.php?t=541803 __________________ Build: http://67-72chevytrucks.com/vboard/s...d.php?t=541803 Dennis H 1969 Chevy C10, SWB, LS3,6.2L engine 1969 Chevy Chevelle SS,BBC, Convertible

04-18-2013, 07:46 PM	#6668
SCHRUMGMC Registered User Join Date: Dec 2012 Location: North Carolina Posts: 4,989	Re: What did you do to your truck today! Good work man ^ __________________ 1971 GMC Sierra 1959 GMC 100

04-18-2013, 10:29 PM	#6669
lghell Registered User Join Date: May 2010 Location: Sweden Posts: 27	Re: What did you do to your truck today! Finally got the pieces together /Patrik Posted via Mobile Device Posted via Mobile Device __________________ C20 4x4 1970 TBI350/TH350/NP205 Sweden

04-18-2013, 10:52 PM	#6670
SCHRUMGMC Registered User Join Date: Dec 2012 Location: North Carolina Posts: 4,989	Re: What did you do to your truck today! is there a certain way to clean those ^ __________________ 1971 GMC Sierra 1959 GMC 100

04-19-2013, 08:16 AM	#6674
aventur1 Registered User Join Date: Aug 2007 Location: Boise, Idaho Posts: 676	Re: What did you do to your truck today! In your photo where the drive line hooks up, mine is leaking at the plate where it bolts up to the main housing. Anything special I need to know when I unbolt everything to install new gasket? What's the best gasket to buy? Thanks __________________ 1968 4x4 Frame, with a 67 Cab and Bed A Shorter Step 1999 Dodge 2500 Cummins Diesel



Register or Log In To remove these advertisements.

04-19-2013, 12:33 PM	#6675
74baggedbug Registered User Join Date: Oct 2011 Location: Houston tx Posts: 699	Re: What did you do to your truck today! Put my deposit down for Robert Lewis makeover to install my vintage air, I know a lot of people will say its easy to install but with working 60hrs to 84hrs a week and a family don't really have the time Posted via Mobile Device

Register or Log In To remove these advertisements.