KS 2nd thread of bunch of parts - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 11-07-2009, 07:33 PM

Bruce, belts need some work and alot of cleaning, I'll lay them out and get a pic of them. The caps are beat up quite a bit, I'll get some pics Sun monring. THANKS OLE BUDDY!!!!!!!!!!!!

90\87Formula · 11-09-2009, 03:34 PM

Hey Randy. How much for a brake pedal assembly (for automatic trans) shipped to TX 79603?
I think the pictures were in post 931.

90\87Formula · 11-19-2009, 11:52 AM

Quote:

Originally Posted by 90\87Formula

Hey Randy. How much for a brake pedal assembly (for automatic trans) shipped to TX 79603?
I think the pictures were in post 931.

FedEx driver delivered it yesterday. Thanks again.
I'll be back for more.

**Dieselwrencher** · 11-19-2009, 09:40 PM

Randy, do you have any nice cowl panels left?

teeitup · 11-19-2009, 09:46 PM

Ryan, none right now. Eric up north has some, he could get one hauled down here for you. Thanks Randy

**Dieselwrencher** · 11-19-2009, 09:48 PM

Yeah, that and hopefully a cab with any luck. I'll post on his thread.

tim21391 · 11-19-2009, 10:18 PM

hey randy were those black visors i seen? would you trade for dark olive? and do u have any automatic tilt columns?

MARIOS68PANEL · 11-19-2009, 11:11 PM

I would like a good headlight switch with metel center handle and a nice wiper switch handle to match. Shipped to Ca,95673 PayPal?

teeitup · 11-20-2009, 07:08 PM

Tim, yes there are some black ones there but not the best shape. Sorry I din't need any green ones, I have a bunch of those
Mario, $20 shipped for pair
Thanks Randy

4tiresngas · 11-21-2009, 10:24 PM

Tim,

Do you test any of those gauges? I have a gauge panel with white gauges. I want to go back to black. I'm not so concerned about the bezel, I'll reuse mine. How much for an instrument panel (all gauges - no tach) to Fort Leavenworth, KA 66027?

Thanks,

Dan

teeitup · 11-21-2009, 11:35 PM

Dan, sorry I don't check any of them, 99% of the trucks I part do not run. $35 shipped for the best one. Thanks Randy

nicke · 11-22-2009, 12:45 AM

interested in the black door panels. Can you get me a pic of the best ones you have?

Thanks!

teeitup · 11-22-2009, 09:46 PM

nicke, I have pretty good set, I think the pass side has a extra small hole in both lower corners. I'll get a pic Mon after work. $40 plus shipping. Thanks Randy

teeitup · 11-23-2009, 08:16 PM

door panels

daddyx3 · 11-28-2009, 10:10 PM

need a fleetsid etailgate and 71 steering wheel reaer bumper and brackets any luck

eric72 · 11-28-2009, 10:14 PM

How much for a pair of 71/2 parking lights (IN BUMPER)

teeitup · 11-28-2009, 11:11 PM

daddy, sorry none of that stuff right now
eric72, are you nneding housings and lens? I'll see what I have out there
Thanks Randy

redbaron69 · 11-29-2009, 12:06 AM

Randy, can you give me a quote on one of those automatic brake pedal setups? shipping to nc 28752. thanks

eric72 · 11-29-2009, 12:01 PM

really just need a set of housings.
Thanks Eric

teeitup · 11-29-2009, 12:46 PM

here is a good set, all mounting holes good too $22 shipped

kedriesbaugh · 11-30-2009, 06:08 PM

Hi do you have the shift linkage off the side of auto,also throttle cable bracket and kickdown cable bracket for 71 Chevy if so how much shipped to 17368

teeitup · 11-30-2009, 09:19 PM

hedriesbaugh, I have a complete th350 tranny linkage setup for $30 plus shipping. Sorry no throttle cable or kickdown bracket right now.
Thanks Randy

49mercpapo · 11-30-2009, 10:13 PM

How much for wiper arms and auto steering column?
Thanks,
Steven

49mercpapo · 11-30-2009, 10:21 PM

hello, I need the handle for the vent door on the kick panel (passenger side) would you have one of those?
Thanks,
Steven

teeitup · 11-30-2009, 10:43 PM

49merc, Steven, I have original trico wiper arms for $10 a pair plus shipping. I need to check my columns and check condition. I should have a knob out there. I can check Tues evening. Thanks Randy

11-07-2009, 07:33 PM	#51
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 2nd thread of bunch of parts Bruce, belts need some work and alot of cleaning, I'll lay them out and get a pic of them. The caps are beat up quite a bit, I'll get some pics Sun monring. THANKS OLE BUDDY!!!!!!!!!!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-09-2009, 03:34 PM	#52
90\87Formula Registered User $90\87Formula's Avatar$ Join Date: Oct 2000 Location: Abilene Texas Posts: 1,756	Re: 2nd thread of bunch of parts Hey Randy. How much for a brake pedal assembly (for automatic trans) shipped to TX 79603? I think the pictures were in post 931. __________________ Robert Member 1532 Last edited by 90\87Formula; 11-09-2009 at 03:36 PM.
$90\87Formula is offline$

11-19-2009, 09:40 PM	#54
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,141	Re: 2nd thread of bunch of parts Randy, do you have any nice cowl panels left? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-19-2009, 09:46 PM	#55
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 2nd thread of bunch of parts Ryan, none right now. Eric up north has some, he could get one hauled down here for you. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-19-2009, 09:48 PM	#56
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,141	Re: 2nd thread of bunch of parts Yeah, that and hopefully a cab with any luck. I'll post on his thread. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-19-2009, 10:18 PM	#57
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	Re: 2nd thread of bunch of parts hey randy were those black visors i seen? would you trade for dark olive? and do u have any automatic tilt columns? __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796

11-19-2009, 11:11 PM	#58
MARIOS68PANEL Active Member Join Date: Mar 2005 Location: North Highlands. California Posts: 449	Re: 2nd thread of bunch of parts I would like a good headlight switch with metel center handle and a nice wiper switch handle to match. Shipped to Ca,95673 PayPal? __________________ 67 short step 71 Custom

11-20-2009, 07:08 PM	#59
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 2nd thread of bunch of parts Tim, yes there are some black ones there but not the best shape. Sorry I din't need any green ones, I have a bunch of those Mario, $20 shipped for pair Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-21-2009, 10:24 PM	#60
4tiresngas An American Soldier Join Date: Feb 2005 Location: Grumolo D' Abadessee, Italy Posts: 503	Re: 2nd thread of bunch of parts Tim, Do you test any of those gauges? I have a gauge panel with white gauges. I want to go back to black. I'm not so concerned about the bezel, I'll reuse mine. How much for an instrument panel (all gauges - no tach) to Fort Leavenworth, KA 66027? Thanks, Dan __________________ Dan dan.brue@us.army.mil

11-21-2009, 11:35 PM	#61
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 2nd thread of bunch of parts Dan, sorry I don't check any of them, 99% of the trucks I part do not run. $35 shipped for the best one. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-22-2009, 12:45 AM	#62
nicke Registered User Join Date: Aug 2009 Location: Spokane, WA Posts: 503	Re: 2nd thread of bunch of parts interested in the black door panels. Can you get me a pic of the best ones you have? Thanks!

11-22-2009, 09:46 PM	#63
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 2nd thread of bunch of parts nicke, I have pretty good set, I think the pass side has a extra small hole in both lower corners. I'll get a pic Mon after work. $40 plus shipping. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-23-2009, 08:16 PM	#64
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 2nd thread of bunch of parts door panels Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-28-2009, 10:10 PM	#65
daddyx3 Registered User Join Date: Nov 2009 Location: hartselle alabama Posts: 18	Re: 2nd thread of bunch of parts need a fleetsid etailgate and 71 steering wheel reaer bumper and brackets any luck

11-28-2009, 10:14 PM	#66
eric72 Registered User Join Date: Dec 2003 Location: georgia Posts: 212	Re: 2nd thread of bunch of parts How much for a pair of 71/2 parking lights (IN BUMPER)



Register or Log In To remove these advertisements.

11-28-2009, 11:11 PM	#67
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 2nd thread of bunch of parts daddy, sorry none of that stuff right now eric72, are you nneding housings and lens? I'll see what I have out there Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-29-2009, 12:06 AM	#68
redbaron69 Registered User Join Date: Jan 2009 Location: marion nc Posts: 588	Re: 2nd thread of bunch of parts Randy, can you give me a quote on one of those automatic brake pedal setups? shipping to nc 28752. thanks __________________ 69 short fleet 350/350 "under construction" 70 short step 307/3 speed

11-29-2009, 12:01 PM	#69
eric72 Registered User Join Date: Dec 2003 Location: georgia Posts: 212	Re: 2nd thread of bunch of parts really just need a set of housings. Thanks Eric

11-29-2009, 12:46 PM	#70
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 2nd thread of bunch of parts here is a good set, all mounting holes good too $22 shipped Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-30-2009, 06:08 PM	#71
kedriesbaugh Registered User Join Date: Nov 2009 Location: Wrightsville, PA Posts: 3	Re: 2nd thread of bunch of parts Hi do you have the shift linkage off the side of auto,also throttle cable bracket and kickdown cable bracket for 71 Chevy if so how much shipped to 17368

11-30-2009, 09:19 PM	#72
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 2nd thread of bunch of parts hedriesbaugh, I have a complete th350 tranny linkage setup for $30 plus shipping. Sorry no throttle cable or kickdown bracket right now. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-30-2009, 10:13 PM	#73
49mercpapo Registered User Join Date: Nov 2009 Location: La Habra, CA Posts: 198	Re: 2nd thread of bunch of parts How much for wiper arms and auto steering column? Thanks, Steven

11-30-2009, 10:21 PM	#74
49mercpapo Registered User Join Date: Nov 2009 Location: La Habra, CA Posts: 198	Re: 2nd thread of bunch of parts hello, I need the handle for the vent door on the kick panel (passenger side) would you have one of those? Thanks, Steven

11-30-2009, 10:43 PM	#75
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 2nd thread of bunch of parts 49merc, Steven, I have original trico wiper arms for $10 a pair plus shipping. I need to check my columns and check condition. I should have a knob out there. I can check Tues evening. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.