MN Parting BBC 1969 GMC c2500 Super Custom! - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Vintage Windmills · 02-28-2011, 11:18 AM

Quote:

Originally Posted by raider65

WOuld you ship the front bumper?

Its tweaked some, probably not worth shipping that far.

Quote:

Originally Posted by 6772GUROO

IM INTERESTED IN STEERING COLUMN AND SHAFT TO STEERING BOX IS IT STILL AVAILABLE ?REPLY TO kurtzrude@yahoo.com

Once I get it out, I'll post another pic or two. Its still available and you are 1st in line for it. I will get it out in the next few days. email makes it hard to keep track of things. I'll discuss everything in the thread here except payment details which you can PM me about.

Quote:

Originally Posted by 70LonghornCST

Is the ashtray a ball bearing type? If so, could you post a pic. of the inside? Price shipped to 95357 please.

I believe so, I'll get a pic by tomorrow when I get pics of the defrost vents for DeadheadNM

esosa67 · 02-28-2011, 11:33 AM

door panels? arm rest? shipped houston 77034

**special-K** · 02-28-2011, 01:20 PM

I'd like to see the fender badges, I'm interested if they aren't real faded,chrome is good,and posts intact.

68chevyfuelie · 02-28-2011, 06:49 PM

Quote:

Originally Posted by Vintage Windmills

Price ($50) is just for the brackets. There is a large one and a small one. The pump includes the reservoir and hose between for $30. No play in pulley.

The rear bumper brackets are good but the front bumper is a little tweaked so they may or may not be.

The left tail lense is junk but the right one has a small chip and small crack in the pic below. Backup lenses are junk.

What is the best way to ship to Canada?
Both brackets are still on the pump in the pic below but are not included with pump and reservoir.

USPS is probably the best way, and cheapest way, to ship to Canada. My zip is N2H 5H1.

$105 or so if I'm doing the math right, before shipping? How much for the decent taillight?

Thanks.

orange-orange · 02-28-2011, 07:08 PM

Is the dash pad sold ? If it is available put me in line and can you describe any faults ? Thanks Randy

old chevy truck · 02-28-2011, 10:07 PM

Hey
I'm Randy i was wounding if you have sold the GM grill or not and was wanting to know what you are asking for it ? thank's for the help.

Vintage Windmills · 02-28-2011, 10:20 PM

Quote:

Originally Posted by 70LonghornCST

Is the ashtray a ball bearing type? If so, could you post a pic. of the inside? Price shipped to 95357 please.

See below for pics. $21 shipped anywhere continental US for ashtray and mount. Surface rust only

Pics of the headlight bezels also. They are pretty nice with only one tiny ding on one. $50 shipped anywhere continental us.

I've decided to sell the AC compressor. Clutch was tested and works. Unit turns over well. $50 plus shipping. VA72C10 gets 1st shot since he is interested in the whole system.

mo · 02-28-2011, 10:29 PM

i'll take the ashtray if 70longhorncst passes.
thanks

Vintage Windmills · 02-28-2011, 10:30 PM

Quote:

Originally Posted by esosa67

door panels? arm rest? shipped houston 77034

Driver panel and rest are junk.

Pass door panel is really nice with only one nick shown below. No cracks or discoloration. There are a couple areas where the adhesive inside is loose and the panel floats a little. Inside panel is awesome with no rust, just dirt and the adhesive residue.

Arm rest has no cracks or nicks but is a little dark on top.

I can do $65 shipped for both

Vintage Windmills · 02-28-2011, 10:39 PM

Quote:

Originally Posted by orange-orange

Is the dash pad sold ? If it is available put me in line and can you describe any faults ? Thanks Randy

Still available and it is actually quite nice. No cracks that I've seen yet but it does have a small nick. I've got the 4 screws out, now tell me how to remove it without breaking? Can this ship USPS or would I have to UPS it?

Vintage Windmills · 02-28-2011, 10:44 PM

Quote:

Originally Posted by old chevy truck

Hey
I'm Randy i was wounding if you have sold the GM grill or not and was wanting to know what you are asking for it ? thank's for the help.

Just selling the upper grille piece (strip right below hood). Price is in 1st post.

**Dave** · 02-28-2011, 10:44 PM

Interested in the dash pad, when it's my turn. After the front screws have been taken out, you need to remove the 5 speed nuts up under the dash. I think the size is 3/8" Let me know, thanks.

**too much stuff** · 02-28-2011, 10:45 PM

Quote:

Originally Posted by Vintage Windmills

Still available and it is actually quite nice. No cracks that I've seen yet but it does have a small nick. I've got the 4 screws out, now tell me how to remove it without breaking? Can this ship USPS or would I have to UPS it?

There are about 6, 3/8ths speed nuts threaded on from the back. Pull the gauge cluster, radio and glove box liner and you will find them. There is one on each end that are a little tougher to get to...
Good luck. Eric

Vintage Windmills · 02-28-2011, 10:48 PM

Thanks Dave and Eric, I figured there were just spring clips since there are all those slots behind it! You just saved a nice dash pad.

Vintage Windmills · 02-28-2011, 11:03 PM

Quote:

Originally Posted by 68chevyfuelie

USPS is probably the best way, and cheapest way, to ship to Canada. My zip is N2H 5H1.

$105 or so if I'm doing the math right, before shipping? How much for the decent taillight?

Thanks.

Shipping to Canada will be $69 so lets say $175 shipped for PS Pump, reservoir, BB pump brackets (2), rear bumper brackets and tail lens. Let me know within 24 hours.

Jud

68lowburb · 02-28-2011, 11:37 PM

ttt

72gmcer · 02-28-2011, 11:45 PM

I'm interested in the upper grill trim if still available. Ship to 77503
Posted via Mobile Device

**special-K** · 03-01-2011, 09:14 AM

Quote:

Originally Posted by special-K

I'd like to see the fender badges, I'm interested if they aren't real faded,chrome is good,and posts intact.

LMK,thanx

orange-orange · 03-01-2011, 11:03 AM

Hi, I see you got help on the removal of the dashpad, thanks you all ! I don't know if it will go with the post office, but no problems with ups. Could you post a picture of the nick you mentioned ? Thanks Randy

VA72C10 · 03-01-2011, 11:33 AM

I'll pass on the compressor due to age

and weight (shipping would be $$$)

How much for the rest of the A/C and what else am I in line for?

Vintage Windmills · 03-01-2011, 02:23 PM

Quote:

Originally Posted by 72gmcer

I'm interested in the upper grill trim if still available. Ship to 77503
Posted via Mobile Device

See pics below of upper grille trim. $67 shipped to you.

Quote:

Originally Posted by special-K

LMK,thanx

See pics below. $20 shipped. Will you take assuming the studs are good? It may be Sat b4 I remove them.

Quote:

Originally Posted by orange-orange

Hi, I see you got help on the removal of the dashpad, thanks you all ! I don't know if it will go with the post office, but no problems with ups. Could you post a picture of the nick you mentioned ? Thanks Randy

Yes, I will post some pics once i remove it. Will likely be sat as well.

Quote:

Originally Posted by VA72C10

I'll pass on the compressor due to age

and weight (shipping would be $$$)

How much for the rest of the A/C and what else am I in line for?

You can have anything AC you want except for the compressor for the $250. Let me know if you don't need anything (such as condenser) to save on shipping. As far as what you're in line for, still same as post #41 IIRC.

72gmcer · 03-01-2011, 02:45 PM

I'll take it, and the bezels if there still available. Pm me the details
Posted via Mobile Device

Vintage Windmills · 03-01-2011, 03:09 PM

Quote:

Originally Posted by 72gmcer

I'll take it, and the bezels if there still available. Pm me the details
Posted via Mobile Device

Lets see if 6t727t2 responds this evening about the bezels. If he doesn't, I believe you are next in line 4 them. The upper grille pc is yours.

On a separate note, Dave from CO, your AC brackets shipped priority mail yesterday so be on the lookout for them.

**DeadheadNM** · 03-01-2011, 07:30 PM

Just curious if you've had time to photo the defrost vents. Thanks.

68chevyfuelie · 03-01-2011, 08:26 PM

Quote:

Originally Posted by Vintage Windmills

Shipping to Canada will be $69 so lets say $175 shipped for PS Pump, reservoir, BB pump brackets (2), rear bumper brackets and tail lens. Let me know within 24 hours.

Jud

I'll have to pass, but thanks for your time. Shipping cross-border really sucks sometimes.

Thanks anyway, this stuff should sell quick.

02-28-2011, 11:33 AM	#52
esosa67 Registered User Join Date: Feb 2011 Location: Houston, Texas Posts: 79	Re: Parting BBC 1969 GMC c2500 Super Custom! door panels? arm rest? shipped houston 77034

02-28-2011, 01:20 PM	#53
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Parting BBC 1969 GMC c2500 Super Custom! I'd like to see the fender badges, I'm interested if they aren't real faded,chrome is good,and posts intact. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-28-2011, 07:08 PM	#55
orange-orange Registered User Join Date: Oct 2006 Location: atlanta Posts: 63	Re: Parting BBC 1969 GMC c2500 Super Custom! Is the dash pad sold ? If it is available put me in line and can you describe any faults ? Thanks Randy

02-28-2011, 10:07 PM	#56
old chevy truck Registered User Join Date: Feb 2010 Location: Clastkiane Oregon Posts: 127	Re: Parting BBC 1969 GMC c2500 Super Custom! Hey I'm Randy i was wounding if you have sold the GM grill or not and was wanting to know what you are asking for it ? thank's for the help.

02-28-2011, 10:29 PM	#58
mo Registered User Join Date: Apr 2001 Location: santa barbara, ca Posts: 829	Re: Parting BBC 1969 GMC c2500 Super Custom! i'll take the ashtray if 70longhorncst passes. thanks

02-28-2011, 10:44 PM	#62
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,376	Re: Parting BBC 1969 GMC c2500 Super Custom! Interested in the dash pad, when it's my turn. After the front screws have been taken out, you need to remove the 5 speed nuts up under the dash. I think the size is 3/8" Let me know, thanks.

02-28-2011, 10:48 PM	#64
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting BBC 1969 GMC c2500 Super Custom! Thanks Dave and Eric, I figured there were just spring clips since there are all those slots behind it! You just saved a nice dash pad. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

02-28-2011, 11:37 PM	#66
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: Parting BBC 1969 GMC c2500 Super Custom! ttt

02-28-2011, 11:45 PM	#67
72gmcer Registered User Join Date: Dec 2010 Location: Pasadena, Tx Posts: 29	Re: Parting BBC 1969 GMC c2500 Super Custom! I'm interested in the upper grill trim if still available. Ship to 77503 Posted via Mobile Device

03-01-2011, 11:03 AM	#69
orange-orange Registered User Join Date: Oct 2006 Location: atlanta Posts: 63	Re: Parting BBC 1969 GMC c2500 Super Custom! Hi, I see you got help on the removal of the dashpad, thanks you all ! I don't know if it will go with the post office, but no problems with ups. Could you post a picture of the nick you mentioned ? Thanks Randy

03-01-2011, 11:33 AM	#70
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Parting BBC 1969 GMC c2500 Super Custom! I'll pass on the compressor due to age and weight (shipping would be $$$) How much for the rest of the A/C and what else am I in line for? __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-01-2011, 02:45 PM	#72
72gmcer Registered User Join Date: Dec 2010 Location: Pasadena, Tx Posts: 29	Re: Parting BBC 1969 GMC c2500 Super Custom! I'll take it, and the bezels if there still available. Pm me the details Posted via Mobile Device

03-01-2011, 07:30 PM	#74
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,311	Re: Parting BBC 1969 GMC c2500 Super Custom! Just curious if you've had time to photo the defrost vents. Thanks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.