Parting out my 61' - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Captainfab** · 03-19-2009, 11:33 PM

Quote:

Originally Posted by Chevysdominate

Grill bezels are sold.

I received them today.....thanks Joseph for the quick shipping. You did an outstanding job of packaging them.

Strodder · 03-20-2009, 10:43 AM

Hey Joeeph, I just thought about what else I need. It's the upper radiator support bracket. The one that is in the top middle of the radiator. If you didn't ship my headlight buckets yet can put them in the same package. If you have that bracket, what would you want for it?

Chevysdominate · 03-20-2009, 02:07 PM

Quote:

Originally Posted by Strodder

Hey Joeeph, I just thought about what else I need. It's the upper radiator support bracket. The one that is in the top middle of the radiator. If you didn't ship my headlight buckets yet can put them in the same package. If you have that bracket, what would you want for it?

Sorry, i all ready shipped your package

When i get home I'll check out the support bracket. Does $15 shipped sound ok.

Strodder · 03-20-2009, 03:26 PM

Quote:

Originally Posted by Chevysdominate

Sorry, i all ready shipped your package

When i get home I'll check out the support bracket. Does $15 shipped sound ok.

Yes that sounds OK. Let me know.

Strodder · 03-20-2009, 09:19 PM

Thanks Joe, I got the package today. Thanks for sending it so quickly. I looked at the pictures of the radiator at the beginning of this thread, and it doesn't look like you have that radiator bracket. The 65 V-8 must have a different set up.
Thanks again,
Dennis

joe231 · 03-21-2009, 12:23 AM

ST, the earlier trucks had flanges on the sides of the radiator that bolted to the core support.

LILRED66 or Captainfab probably have what you need.....

Strodder · 03-21-2009, 12:03 PM

Quote:

Originally Posted by joe231

ST, the earlier trucks had flanges on the sides of the radiator that bolted to the core support.

LILRED66 or Captainfab probably have what you need.....

Thanks Joe

bosephus · 03-25-2009, 10:19 PM

Got my parts today,Thanks!Has anyone gotten the vent knobs/cables yet?

lil_red_farmer_boy · 03-26-2009, 12:01 PM

Do you still have the fenders still and are they any good?

Chevysdominate · 03-26-2009, 02:31 PM

Quote:

Originally Posted by bosephus

Got my parts today,Thanks!Has anyone gotten the vent knobs/cables yet?

The vents and knobs for the 61 are going into my 65. I'm not sure if they are a direct bolt in, but i like the cable pull knob system better then the lever.

Chevysdominate · 03-26-2009, 02:33 PM

Quote:

Originally Posted by lil_red_farmer_boy

Do you still have the fenders still and are they any good?

The fenders are in OK shape. Probably need some rust repair on the usual lower rear panel. I think I'll have tomorrow off so I'll try to get them off the vehicle and i can get a better idea what condition there in.

gostranger · 03-26-2009, 06:28 PM

did you have any time to look at the tail gate?

Arekusu · 03-26-2009, 11:56 PM

Still looking for the hood Chevy emblem / that other grille you were talking about. How much to 87111?

Alex

Chevysdominate · 03-29-2009, 08:21 PM

Quote:

Originally Posted by gostranger

did you have any time to look at the tail gate?

Take a look at the tailgate thread. I got some more pictures up.

Chevysdominate · 03-29-2009, 08:41 PM

Quote:

Originally Posted by Arekusu

Still looking for the hood Chevy emblem / that other grille you were talking about. How much to 87111?

Alex

I started a new thread for the grill. You'll find more information there.

http://67-72chevytrucks.com/vboard/s...d.php?t=336231

Chevysdominate · 03-30-2009, 02:28 PM

Quote:

Originally Posted by Chevysdominate

Heres some pics for you. The center part has some cracks but would be covered buy the horn button. The wheel were the spokes meet it have a few small cracks too.

Steering wheel price lowered. I would do $35 shipped for it. Thanks

Grifter · 03-31-2009, 03:42 PM

Is the Driver Fender still up for sale. If so how to ship to 47201 Columbus IN and what kind of shape is it in.

Thanks

Chevysdominate · 03-31-2009, 04:02 PM

Quote:

Originally Posted by Grifter

Is the Driver Fender still up for sale. If so how to ship to 47201 Columbus IN and what kind of shape is it in.

Thanks

The fenders are in OK shape. Both of them will need some rust repair at the bottom corner at the doors. I'll be removing the fenders along with a few other pieces this weekend. I'll take a better look at them and get some more pictures up.

Chevysdominate · 04-01-2009, 05:25 PM

The driver side door is sold/sale pending.....Thanks bosephus.

Raider Rudy · 04-12-2009, 12:30 AM

How much for the glove box door?

terd ferguson · 04-12-2009, 10:41 AM

How about a price for the grill support panel shipped to NC 28025? Thanks for your time.

Chevysdominate · 04-13-2009, 01:44 AM

Quote:

Originally Posted by Raider Rudy

How much for the glove box door?

I'd do $20 shipped for the door. Thanks

Chevysdominate · 04-13-2009, 01:45 AM

Quote:

Originally Posted by terd ferguson

How about a price for the grill support panel shipped to NC 28025? Thanks for your time.

Let me take a look at it and ill get back to you.

Riddick · 04-18-2009, 10:03 PM

how much for the whole dropout differential ? do you know the gear ratio? thanks Bill

ryans62c20 · 04-21-2009, 09:28 AM

If you are willing to sell the rear transmission mount crossmember, will you take some pictures of it and note the dimensions? I believe that it is the same mount for my '62 frame. How much will you take for it?

03-20-2009, 10:43 AM	#52
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Parting out my 61' Hey Joeeph, I just thought about what else I need. It's the upper radiator support bracket. The one that is in the top middle of the radiator. If you didn't ship my headlight buckets yet can put them in the same package. If you have that bracket, what would you want for it? __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

03-20-2009, 09:19 PM	#55
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Parting out my 61' Thanks Joe, I got the package today. Thanks for sending it so quickly. I looked at the pictures of the radiator at the beginning of this thread, and it doesn't look like you have that radiator bracket. The 65 V-8 must have a different set up. Thanks again, Dennis __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

03-21-2009, 12:23 AM	#56
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Parting out my 61' ST, the earlier trucks had flanges on the sides of the radiator that bolted to the core support. LILRED66 or Captainfab probably have what you need..... __________________ *CHEVY ONLY*

03-25-2009, 10:19 PM	#58
bosephus Registered User Join Date: Feb 2008 Location: texas gulf coast Posts: 211	Re: Parting out my 61' Got my parts today,Thanks!Has anyone gotten the vent knobs/cables yet?

03-26-2009, 12:01 PM	#59
lil_red_farmer_boy Registered User Join Date: Mar 2009 Location: Morrison Missouri Posts: 17	Re: Parting out my 61' Do you still have the fenders still and are they any good?

03-26-2009, 06:28 PM	#62
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: Parting out my 61' did you have any time to look at the tail gate?

03-26-2009, 11:56 PM	#63
Arekusu Registered User Join Date: Mar 2008 Location: Tacoma, Wa Posts: 334	Re: Parting out my 61' Still looking for the hood Chevy emblem / that other grille you were talking about. How much to 87111? Alex

03-31-2009, 03:42 PM	#67
Grifter Registered User Join Date: Aug 2008 Location: Columbus, IN Posts: 10	Re: Parting out my 61' Is the Driver Fender still up for sale. If so how to ship to 47201 Columbus IN and what kind of shape is it in. Thanks

04-01-2009, 05:25 PM	#69
Chevysdominate Registered User Join Date: Jul 2006 Location: Springtucky, Oregon Posts: 265	Re: Parting out my 61' The driver side door is sold/sale pending.....Thanks bosephus.

04-12-2009, 12:30 AM	#70
Raider Rudy Registered User Join Date: Jan 2008 Location: Riverside, Ca. Posts: 241	Re: Parting out my 61' How much for the glove box door?

04-12-2009, 10:41 AM	#71
terd ferguson Registered User Join Date: Mar 2009 Location: Concord, NC Posts: 531	Re: Parting out my 61' How about a price for the grill support panel shipped to NC 28025? Thanks for your time. __________________ "I never apologize. I'm sorry, but that's just the way I am." - Homer J. Simpson 1955 2nd Series Chevy "King Of Trucks"

04-18-2009, 10:03 PM	#74
Riddick Registered User Join Date: Feb 2006 Location: Omaha Ne Posts: 13	Re: Parting out my 61' how much for the whole dropout differential ? do you know the gear ratio? thanks Bill

04-21-2009, 09:28 AM	#75
ryans62c20 Registered User Join Date: Apr 2009 Location: Madison, Alabama Posts: 30	Re: Parting out my 61' If you are willing to sell the rear transmission mount crossmember, will you take some pictures of it and note the dimensions? I believe that it is the same mount for my '62 frame. How much will you take for it? __________________ Ryan My 1962 c20 build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=339328



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.