NC 88 crew cab 4x4 part out - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

82ccshorty · 06-23-2013, 11:16 AM

Quote:

Originally Posted by red87gmc

hows the dash pad looked ok in a picture
Thanks Chuck

Dash pad is cracked.
Posted via Mobile Device

82ccshorty · 06-23-2013, 11:19 AM

Quote:

Originally Posted by BONUSCAB

Also looking for a battery tray. Actually, I need a standard and an auxiliary.

Battery tray is rusted. Only one good fender emblem.
Posted via Mobile Device

82ccshorty · 06-23-2013, 11:21 AM

Quote:

Originally Posted by slimneverdies

Is the cab In need of much rust repair??
Posted via Mobile Device

Cab does need some rust repair. I can tell for sure it needs rockers and cab corners. There is a holes I can see on the drivers side floor pan also
Posted via Mobile Device

red87gmc · 06-23-2013, 04:28 PM

how bad is the pad ? could you take a pic of it ?
Thanks Chuck

B_derK20 · 06-23-2013, 06:20 PM

I'd be interested in the cab clearance lights and harness if they're not broken. Shipping would be to 81504.

82ccshorty · 06-24-2013, 11:16 AM

Quote:

Originally Posted by red87gmc

how bad is the pad ? could you take a pic of it ?
Thanks Chuck

it had a cracks in a couple places. on goes from front to back. probably not saveable.

82ccshorty · 06-24-2013, 01:39 PM

Quote:

Originally Posted by B_derK20

I'd be interested in the cab clearance lights and harness if they're not broken. Shipping would be to 81504.

will check those tonight

BIGCHEVYMAN · 06-24-2013, 07:57 PM

Put me in line for the hub caps. I am interested in the pair.

82ccshorty · 06-25-2013, 06:35 AM

Still haven't heard from either of the other two guys.
Posted via Mobile Device

48cj2a · 06-25-2013, 06:55 AM

Quote:

Originally Posted by 48cj2a

I only need one (#1/4 looks the best) how much are you asking if you will separate?

or how much for a pair?

Am I one of the other two guys?

I never saw a reply...

82ccshorty · 06-25-2013, 06:56 AM

75$ for pair. I thought I replied. My fault.
Posted via Mobile Device

82ccshorty · 06-25-2013, 07:09 AM

Quote:

Originally Posted by B_derK20

I'd be interested in the cab clearance lights and harness if they're not broken. Shipping would be to 81504.

All cab lights appear to be in good condition. 50shipped
Posted via Mobile Device

48cj2a · 06-25-2013, 10:20 AM

Quote:

Originally Posted by BIGCHEVYMAN

Put me in line for the hub caps. I am interested in the pair.

$75 is a little too much for me considering condition and I only really need one...BIGCHEVYMAN can have my place in line - thanks!

BurnoutNova · 06-25-2013, 05:57 PM

Are the cab clearance lights sold already? If not is the wiring in good shape? Are the rubber bases soft or hard? I'd also be interested in the trim that goes on the dashpad.. this is a non a/c truck right?

82ccshorty · 06-25-2013, 09:08 PM

cab lights arent sold yet. give other guy till thursday to respond.

BurnoutNova · 06-25-2013, 10:00 PM

Quote:

Originally Posted by 82ccshorty

cab lights arent sold yet. give other guy till thursday to respond.

Cool, just pm me if they get to me!

BIGCHEVYMAN · 06-29-2013, 09:29 AM

At $75 i am gonna pass also

82ccshorty · 06-29-2013, 10:31 PM

Truck has been sold.
Posted via Mobile Device

82ccshorty · 07-08-2013, 10:56 PM

Truck back up for part out. Deal fell three with buyer. Let me know what you guys need
Posted via Mobile Device

B_derK20 · 07-09-2013, 04:15 PM

Ill take the cab lights and harness if im still in line for them. PM sent
Posted via Mobile Device

DirtRocket8x · 07-25-2013, 08:36 AM

Front spring hangers/ core support brAckets shipped to 75042
Posted via Mobile Device

82ccshorty · 07-25-2013, 09:07 AM

keeping them. not taking anything off the frame. so if its riveted or welded to the frame it stays.

smithr · 08-22-2013, 12:52 AM

What do you have to have for a rolling frame?

67pete300 · 08-28-2013, 09:48 PM

Do you still have the rear seat belt retractors? How much shipped to 06333?

Thanks.

06-23-2013, 04:28 PM	#54
red87gmc Registered User Join Date: Dec 2011 Location: Coventry ct Posts: 12	Re: 88 crew cab 4x4 part out how bad is the pad ? could you take a pic of it ? Thanks Chuck

06-23-2013, 06:20 PM	#55
B_derK20 Registered User Join Date: Apr 2011 Location: Clifton, CO Posts: 75	Re: 88 crew cab 4x4 part out I'd be interested in the cab clearance lights and harness if they're not broken. Shipping would be to 81504.

06-24-2013, 07:57 PM	#58
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Re: 88 crew cab 4x4 part out Put me in line for the hub caps. I am interested in the pair.

06-25-2013, 06:35 AM	#59
82ccshorty Registered User Join Date: Jun 2012 Location: charlotte, north carolina Posts: 950	Re: 88 crew cab 4x4 part out Still haven't heard from either of the other two guys. Posted via Mobile Device __________________ 1969 chevy camaro Z28 #matchin Factory 4wheel disc 1969 chevy cst10 big block overdrive 5/7 drop dog dishs 1997 gmc yukon 2 door 2 wheel drive project 4/5.5 22s 2004 gmc sierra dually 4/4 lowering daily driver

06-25-2013, 06:56 AM	#61
82ccshorty Registered User Join Date: Jun 2012 Location: charlotte, north carolina Posts: 950	Re: 88 crew cab 4x4 part out 75$ for pair. I thought I replied. My fault. Posted via Mobile Device __________________ 1969 chevy camaro Z28 #matchin Factory 4wheel disc 1969 chevy cst10 big block overdrive 5/7 drop dog dishs 1997 gmc yukon 2 door 2 wheel drive project 4/5.5 22s 2004 gmc sierra dually 4/4 lowering daily driver

06-25-2013, 05:57 PM	#64
BurnoutNova Registered User Join Date: Mar 2004 Location: CA Posts: 2,057	Re: 88 crew cab 4x4 part out Are the cab clearance lights sold already? If not is the wiring in good shape? Are the rubber bases soft or hard? I'd also be interested in the trim that goes on the dashpad.. this is a non a/c truck right?

06-25-2013, 09:08 PM	#65
82ccshorty Registered User Join Date: Jun 2012 Location: charlotte, north carolina Posts: 950	Re: 88 crew cab 4x4 part out cab lights arent sold yet. give other guy till thursday to respond. __________________ 1969 chevy camaro Z28 #matchin Factory 4wheel disc 1969 chevy cst10 big block overdrive 5/7 drop dog dishs 1997 gmc yukon 2 door 2 wheel drive project 4/5.5 22s 2004 gmc sierra dually 4/4 lowering daily driver

06-29-2013, 09:29 AM	#67
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Re: 88 crew cab 4x4 part out At $75 i am gonna pass also

06-29-2013, 10:31 PM	#68
82ccshorty Registered User Join Date: Jun 2012 Location: charlotte, north carolina Posts: 950	Re: 88 crew cab 4x4 part out Truck has been sold. Posted via Mobile Device __________________ 1969 chevy camaro Z28 #matchin Factory 4wheel disc 1969 chevy cst10 big block overdrive 5/7 drop dog dishs 1997 gmc yukon 2 door 2 wheel drive project 4/5.5 22s 2004 gmc sierra dually 4/4 lowering daily driver

07-08-2013, 10:56 PM	#69
82ccshorty Registered User Join Date: Jun 2012 Location: charlotte, north carolina Posts: 950	Re: 88 crew cab 4x4 part out Truck back up for part out. Deal fell three with buyer. Let me know what you guys need Posted via Mobile Device __________________ 1969 chevy camaro Z28 #matchin Factory 4wheel disc 1969 chevy cst10 big block overdrive 5/7 drop dog dishs 1997 gmc yukon 2 door 2 wheel drive project 4/5.5 22s 2004 gmc sierra dually 4/4 lowering daily driver

07-09-2013, 04:15 PM	#70
B_derK20 Registered User Join Date: Apr 2011 Location: Clifton, CO Posts: 75	Re: 88 crew cab 4x4 part out Ill take the cab lights and harness if im still in line for them. PM sent Posted via Mobile Device

07-25-2013, 08:36 AM	#71
DirtRocket8x Registered User Join Date: Dec 2011 Location: Union valley texas Posts: 75	Re: 88 crew cab 4x4 part out Front spring hangers/ core support brAckets shipped to 75042 Posted via Mobile Device

07-25-2013, 09:07 AM	#72
82ccshorty Registered User Join Date: Jun 2012 Location: charlotte, north carolina Posts: 950	Re: 88 crew cab 4x4 part out keeping them. not taking anything off the frame. so if its riveted or welded to the frame it stays. __________________ 1969 chevy camaro Z28 #matchin Factory 4wheel disc 1969 chevy cst10 big block overdrive 5/7 drop dog dishs 1997 gmc yukon 2 door 2 wheel drive project 4/5.5 22s 2004 gmc sierra dually 4/4 lowering daily driver

08-22-2013, 12:52 AM	#73
smithr Registered User Join Date: Jan 2013 Location: myrtle beach Posts: 2	Re: 88 crew cab 4x4 part out What do you have to have for a rolling frame?

08-28-2013, 09:48 PM	#74
67pete300 Registered User Join Date: Mar 2008 Location: Burke, VA Posts: 114	Re: 88 crew cab 4x4 part out Do you still have the rear seat belt retractors? How much shipped to 06333? Thanks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.