TX Parting out another 72 LWB and other parts - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**nightmare** · 08-08-2013, 11:38 AM

Payment sent for trim clips

tlcrz1972 · 08-08-2013, 12:09 PM

It has some issues.

I have a local interest on that one, I have another grill I will pull it out and get some pictures of it. for you

Quote:

Originally Posted by tommys72

What shape is the grill in on the truck.. looks decent from what I can see
Posted via Mobile Device

TOMMY70C10 · 08-08-2013, 12:26 PM

Quote:

Originally Posted by tlcrz1972

tommy,

i just finished cutting them out, will get them boxed up and weighed today.

I may not have cut enough on the drivers side inside panel. The saw blade wandered on me cutting from the outside.

Look at the pictures and let me know if the one will work for you and is worth shipping.

Pm sent on payment info

looks good i sent you a pm thanks tommy

tlcrz1972 · 08-08-2013, 02:45 PM

LS1RedZ inquired about glove box lids. So he has first dibs.

Here are the few I have that are for sale

The one in the best condition is the Light blue one with down stop free working hinge, latch and Chevrolet custom badge
$45.00 plus shipping

The second best condition is the grey/sandblasted one with hinge
$42.00 plus shipping

The other two are equally good, darker blue has down stop and frozen hinge and the black one is nice and has holes for the Cheyenne super badge
$40.00 plus shipping

tlcrz1972 · 08-09-2013, 11:02 AM

They are kinda sorta black, they been in the weather and all I have is the two with the locking mechanism.

Quote:

Originally Posted by BKSS67

Interested in any of the factory seat belts that are left?

I'm assuming they are black.

PM Sent

ulakovic22 · 08-09-2013, 11:14 AM

Quote:

Originally Posted by tlcrz1972

I have a couple of seats, are you looking for a full spring seat or a full foam seat or a spring bottom/foam back or a foam bottom/ spring back. Yes I have seen them in those configurations, but will have to get them out of my storage to see what I have.

Full Spring please. Also do you have any rear bumper brackets for a SWB?

RetiredUSAF · 08-12-2013, 04:30 PM

Gas pedal and hardware, auto trans cross member shipped to 65037?

JimH2828 · 08-12-2013, 04:45 PM

If the Bendix brake booster and associated parts are not taken, let me know price to GA 30005.

Parts: brake booster, firewall bracket\nuts, push rode with peddle fitting\bolt\nut.

Are any of the firewall grommets worth saving?

Thanks
Jim

tlcrz1972 · 08-12-2013, 08:01 PM

Jim,

I won't guarantee the booster is good. Basically we agree it is just a core, for safety reasons.

So the booster, firewall mount bracket (with attach nuts), push rod (with fitting, pedal bolt & nut).

I will go $68.00 shipped to you

Thanks for inquiring
Brian

Quote:

Originally Posted by JimH2828

If the Bendix brake booster and associated parts are not taken, let me know price to GA 30005.

Parts: brake booster, firewall bracket\nuts, push rode with peddle fitting\bolt\nut.

Are any of the firewall grommets worth saving?

Thanks
Jim

tlcrz1972 · 08-12-2013, 08:06 PM

I'm asking $50.00 for the cross member, $35.00 for the pedal assy (w/ h'ware)
+ if paying by paypal a 3.045% transaction fee.

And I'll have to get a shipping cost for all of it once it's packaged.

Thanks Brian

Quote:

Originally Posted by RetiredUSAF

Gas pedal and hardware, auto trans cross member shipped to 65037?

wild4wheels · 08-13-2013, 01:11 AM

Price on inner grill? (w bowtie) need shipped to 85142 -

Thanks!

Wild

tlcrz1972 · 08-13-2013, 09:19 AM

Sorry,

Both those pieces are dead, not worth my time boxing them up, and not worth your money being spent on them.

Thanks for inquiring.

Quote:

Originally Posted by wild4wheels

Price on inner grill? (w bowtie) need shipped to 85142 -

Thanks!

Wild

StRockwell · 08-13-2013, 10:43 AM

Looking for a price/condition for the automatic steering column and automatic pedal assembly. If you could include shipping in the price to 57701. Thanks for your time.

tlcrz1972 · 08-13-2013, 07:48 PM

Jim,

Here are some pictures of the brake booster. Per your PM.

Brian

Quote:

Originally Posted by JimH2828

If the Bendix brake booster and associated parts are not taken, let me know price to GA 30005.

Parts: brake booster, firewall bracket\nuts, push rode with peddle fitting\bolt\nut.

Are any of the firewall grommets worth saving?

Thanks
Jim

CaptRMW · 08-13-2013, 08:01 PM

Brian I got the cargo light. Exactly as described and promptly shipped. Thanks again, Roger

tlcrz1972 · 08-13-2013, 08:02 PM

I'm asking $50.00 for the column
It looks complete, it's in good shape, the shift indicator is cracked, the shifter is rusted and pitted, and it has been in the weather some so the bearings look rusted)

I'm asking $35.00 for the brake pedal assy

As far as shipping I won't know till it's pulled and packaged. MY GUESS would be $25 to $35

QUOTE=StRockwell;6218376]Looking for a price/condition for the automatic steering column and automatic pedal assembly. If you could include shipping in the price to 57701. Thanks for your time.[/QUOTE]

tlcrz1972 · 08-13-2013, 08:04 PM

Roger,

Thanks for the reply, I try to tell it like it is on parts condition.

Thanks Brian

Quote:

Originally Posted by CaptRMW

Brian I got the cargo light. Exactly as described and promptly shipped. Thanks again, Roger

tlcrz1972 · 08-13-2013, 08:28 PM

Attention everyone:

Please keep all inquiries on this thread, it helps me keep up with everyones wants and needs. So I don't miss your request.

Thanks

JimH2828 · 08-13-2013, 09:16 PM

Thanks for posting the brake booster pics. At $60 shipped your price is right, but I'm going to have to pass. There are just too many other items I need right now.

Thanks
Jim

Hardesty454 · 08-14-2013, 12:45 AM

If you're cutting the bed up how are both tail light sections from pocket back? If any good how much? I see the picture but can't make em out. Thanks!
Posted via Mobile Device

tlcrz1972 · 08-14-2013, 10:38 AM

Both are banged up.

Quote:

Originally Posted by Hardesty454

If you're cutting the bed up how are both tail light sections from pocket back? If any good how much? I see the picture but can't make em out. Thanks!
Posted via Mobile Device

Nathans71 · 08-14-2013, 11:05 AM

Center link (drag link?) to 40047 - Also second in line for uncut taillight harness?

coahmike00 · 08-14-2013, 09:28 PM

Quote:

Originally Posted by tlcrz1972

even more pictures

i am interested in I booster if selling complete

tlcrz1972 · 08-14-2013, 09:39 PM

I am asking $55.00 for the drag link plus shipping

this uncut taillight harness you referring to the one from cab to last frame bulkhead (All of those I have are cut, burnt, embrittled or just plain dead). Or the one from the last bulkhead to the lights? I will have to see what I have.

Thanks for the inquiry
Brian

Quote:

Originally Posted by Nathans71

Center link (drag link?) to 40047 - Also second in line for uncut taillight harness?

tlcrz1972 · 08-14-2013, 09:52 PM

Mike,

Ok tell me what you consider complete. And Just to be sure you know this I can't guarantee its condition. It has been somewhat exposed to the weather, and didn't have the vaccum port closed off. I am selling it as a core only for safety reasons.

thanks Brian

Quote:

Originally Posted by coahmike00

i am interested in I booster if selling complete

08-08-2013, 02:45 PM	#54
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: Parting out another 72 LWB and other parts LS1RedZ inquired about glove box lids. So he has first dibs. Here are the few I have that are for sale The one in the best condition is the Light blue one with down stop free working hinge, latch and Chevrolet custom badge $45.00 plus shipping The second best condition is the grey/sandblasted one with hinge $42.00 plus shipping The other two are equally good, darker blue has down stop and frozen hinge and the black one is nice and has holes for the Cheyenne super badge $40.00 plus shipping Attached Images

08-12-2013, 04:30 PM	#57
RetiredUSAF Registered User Join Date: Jul 2013 Location: Missouri Posts: 25	Re: Parting out another 72 LWB and other parts Gas pedal and hardware, auto trans cross member shipped to 65037?

08-12-2013, 04:45 PM	#58
JimH2828 Registered User Join Date: Oct 2012 Location: Cumming GA Posts: 613	Re: Parting out another 72 LWB and other parts If the Bendix brake booster and associated parts are not taken, let me know price to GA 30005. Parts: brake booster, firewall bracket\nuts, push rode with peddle fitting\bolt\nut. Are any of the firewall grommets worth saving? Thanks Jim

08-13-2013, 01:11 AM	#61
wild4wheels Registered User Join Date: Jan 2001 Location: Queen Creek, Arizona Posts: 1,626	Re: Parting out another 72 LWB and other parts Price on inner grill? (w bowtie) need shipped to 85142 - Thanks! Wild __________________ Dave aka "Wild" Current truck "Ida Mae" 71 K5 Blazer Former Trucks "Loretta" 71 Longbed (AZ) "Tanya" 69 Stepside (AZ) "Ferdinand" 71 Longhorn (SD) "Patches" 67 Panel (IA/ KY) "Rosita" 68 C30 (KY) Instagram @Wildforwheels @k5_klub @c10university Profile pic provided by Jeff Sundance

08-13-2013, 10:43 AM	#63
StRockwell Registered User Join Date: Mar 2013 Location: Rapid City, SD Posts: 23	Re: Parting out another 72 LWB and other parts Looking for a price/condition for the automatic steering column and automatic pedal assembly. If you could include shipping in the price to 57701. Thanks for your time.

08-13-2013, 08:01 PM	#65
CaptRMW Custom Sport W/T Join Date: Nov 2010 Location: Tarpon Springs,Fl & Annapolis,Md. ....................Quaint drinking villages with a fishing problem Posts: 898	Re: Parting out another 72 LWB and other parts Brian I got the cargo light. Exactly as described and promptly shipped. Thanks again, Roger

08-13-2013, 08:02 PM	#66
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: Parting out another 72 LWB and other parts I'm asking $50.00 for the column It looks complete, it's in good shape, the shift indicator is cracked, the shifter is rusted and pitted, and it has been in the weather some so the bearings look rusted) I'm asking $35.00 for the brake pedal assy As far as shipping I won't know till it's pulled and packaged. MY GUESS would be $25 to $35 QUOTE=StRockwell;6218376]Looking for a price/condition for the automatic steering column and automatic pedal assembly. If you could include shipping in the price to 57701. Thanks for your time.[/QUOTE]

08-13-2013, 08:28 PM	#68
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: Parting out another 72 LWB and other parts Attention everyone: Please keep all inquiries on this thread, it helps me keep up with everyones wants and needs. So I don't miss your request. Thanks

08-13-2013, 09:16 PM	#69
JimH2828 Registered User Join Date: Oct 2012 Location: Cumming GA Posts: 613	Re: Parting out another 72 LWB and other parts Thanks for posting the brake booster pics. At $60 shipped your price is right, but I'm going to have to pass. There are just too many other items I need right now. Thanks Jim

08-14-2013, 12:45 AM	#70
Hardesty454 Registered User Join Date: Feb 2011 Location: Riverbank, Ca Posts: 1,006	Re: Parting out another 72 LWB and other parts If you're cutting the bed up how are both tail light sections from pocket back? If any good how much? I see the picture but can't make em out. Thanks! Posted via Mobile Device __________________ Rob 1971 c10 - ground up in progress Tripp's Speed Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=589750

08-14-2013, 11:05 AM	#72
Nathans71 Registered User Join Date: Jan 2007 Location: Mt. Washington Kentucky Posts: 97	Re: Parting out another 72 LWB and other parts Center link (drag link?) to 40047 - Also second in line for uncut taillight harness?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.