OR 100's of misc parts from the last 6 trucks parted out - Page 31 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tll74** · 07-19-2014, 02:37 AM

Quote:

Originally Posted by 71 super

Tom do you have a standard cooling fan for a v8, a vacuum fitting for rear of intake for an automatic and a 67/68 washer bottle holder- it has the two ears that are vertical? If so I will take them- 1 some or all. Will Paypal ASAP, harold

Harold, I have all of it. fan 15.00 4 blade or multi blade flex. 67-68 or 69-72?, 5.00 vac fitting, single port or multi port (trans and P/B ports)? 10.00 washer bottle holder. Shipping 15.00

Quote:

Originally Posted by rusted72'

Tom-
I need a set of alternator brackets and power steering brackets for a 72' with a 350sb.
trying to make my truck look as stock as possible.
if you do how much shipped to 90601?

I have the alt brackets 25.00, I only have the P/S brackets with a pump assy 75.00. Shipping on both 25.00 alt brackets only 15.00.

[QUOTE=tjsblazer;6766674]Tom, I am looking for a set of 4x4 exhaust hangers. One longer one midframe by the transfer case and one small one on the x-member above the rear axle. On Blazers for sure. Probably swb truck also. Unsure about other models. Do you have a set?
I have the front one. I'll check for the rear.

pics for VA72C10

71 super · 07-19-2014, 08:07 AM

Four blade fan 67-68 , single port vac. Found a washer bottle bracket in box of junk that came with truck. Shot me Paypal and I will get you paid. Thank you harold

rusted72' · 07-19-2014, 01:10 PM

sounds good, can i get some pics before i commit?

thank you

**tll74** · 07-20-2014, 01:09 AM

Quote:

Originally Posted by rusted72'

sounds good, can i get some pics before i commit?

thank you

Sure, It will be next week though.

67JimmyMO · 07-20-2014, 10:03 AM

Quote:

Originally Posted by tll74

I have not been able to get it removed yet and I need it off for weight and dimensions for shipping cost. I been preparing for a vacation with the family to CA and just ran out of time. I'll have clean slate when I return next week...

Any progress on this one yet (underbed spare carrier for 67 GMC SWB)?

Thanks, Jody

tjsblazer · 07-20-2014, 11:22 AM

Here is a borrowed pic of a set of hangers. The small angle one is from the xmember above the rear axle. Thanks for looking.

Jake1971 · 07-24-2014, 08:02 PM

Tom, my antenna and hardware arrived today. Thanks again!

Userone · 07-26-2014, 09:57 AM

got any more radio deletes? i need one with brackets

*JonnyC10* · 07-28-2014, 09:49 PM

Trailing arms? Pics and price shipped to 03809? Thanks.

Jake1971 · 08-02-2014, 05:03 PM

Hey Tom, I am looking for one blue armrest for my '71 C10 and two unmolested tail light wiring harnesses from the firewall all the way back to the buckets. LMK total including shipping to 78602. Thanks again!

Ccc925 · 08-03-2014, 01:46 PM

Any 1972 cheyenne door panels (black)? Thanks pm me

Esetonni · 08-03-2014, 01:49 PM

Do you have any cabs?

pontiacpro · 08-03-2014, 08:14 PM

Do you have a front centerline for the steering and if so how much? Thanks

GRADYS Performance · 08-04-2014, 04:00 PM

Do you have a throttle cable bracket for a mid 80s Q-jet with a TV cable hole for a 700R4 that bolts down with back carb bolts?

**pimpston65** · 08-04-2014, 06:18 PM

Quote:

Originally Posted by tll74

Sure, It will be next week though.

any horns lo and hi. t3 headlights. 3 section antenna.

**burb71** · 08-05-2014, 11:16 PM

A few parts that really need…

The bolt that holds the muffler assembly on to the A/C compressor
The Speaker to radio harness
A solid mast radio antenna
And last, the little 2 light bulb harness that go's to the A/C control ( I know it was a 2 bulb harness for 1968 not sure about other years.

Please let me know.
Thanks Steve

**tll74** · 08-09-2014, 01:03 PM

Guys, sorry for the delay. I've been on vacation again and working 12-14 days so online and truck parts time has been hard to come by.

67JimmyMO, Jody, Yes. I have it off and I'm acid dipping as it has some surface rust. It could ship next week if your still up for it.

tjsblazer, I only have the bigger one. 14.00 shipped

Userone, I just bought a truck with one but I'm not sure if I'm going to part it yet. If i do I'll try to remember you for it.

JonnyC10, Yes I have a very nice pair. I acid dipped them which they didn't really need as they just some minor surface rust. 150.00 plus shipping. Shipping kinda spendy. LMK if the 150.00 is ok and I'll get a shipping cost.

Jake1971, I have the harness from the firewall to the bumper but nothing good from there to the sockets. I should have the armrest but I'll have to look to comfirm.
Ccc925, None that I'm willing to part with right now.

Esetonni, Yes but shippng to NC would kill the deal.

pontiacpro, 2wd draglink? If so what year and 1/2t or 3/4t? I have all of them.

GRADYS Performance, All the TH700 tv cable brackets as I recall all bolt down to the intake which I do have.

pimpston65, No HI note horns. Yes on the low. No T3's that I want to part with. Yes on antenna but couldn't get to pulling one for a couple weeks.

burb71, The speaker harness is soldered to the speaker. I would cut one off. 7.50 mailed. No antenna and nothing on the 2 bulb harness.

I will be gone on vacation again next Thursday through the following Wednesday. Thanks, Tom

tjsblazer · 08-09-2014, 03:00 PM

Quote:

Originally Posted by tll74

tjsblazer, I only have the bigger one. 14.00 shipped

Hey Tom, I've found a set in the mean time.
Thanks, Jeff.

71 super · 08-09-2014, 03:09 PM

Tom do you have a interior fuse box/ harness for a 67-68, the original one I have has some internal issues and I do not have lights or wipers. I prefer a 67 with idiot light dash, but will take what you have. Thanks harold

pontiacpro · 08-09-2014, 05:05 PM

1969 1/2 ton 2wd with manual steering. Price with shipping to 17331. Thanks

67JimmyMO · 08-10-2014, 09:14 AM

Quote:

Originally Posted by tll74

...67JimmyMO, Jody, Yes. I have it off and I'm acid dipping as it has some surface rust. It could ship next week if your still up for it...

Tom, yes I am still interested. If it was just surface rust on the carrier and the hardware is good that would be fine. Could you post a pic of it when you get a chance and let me know what the shipping is (65604)? Still no rush on my end...next week...next month...not a problem!

**tll74** · 08-10-2014, 11:58 AM

Quote:

Originally Posted by 71 super

Tom do you have a interior fuse box/ harness for a 67-68, the original one I have has some internal issues and I do not have lights or wipers. I prefer a 67 with idiot light dash, but will take what you have. Thanks harold

Harold, I should have one from a 68 gauge/4sp truck I parted a year ago or so. I'll look for it Monday. If not I have atleast 5 complete 67-68 trucks that would have one but I couldn't get one out for at least 2 weeks. 65.00 plus 15.00 shipping for a very nice one.

Quote:

Originally Posted by pontiacpro

1969 1/2 ton 2wd with manual steering. Price with shipping to 17331. Thanks

25.00 plus 16.00 shipping. It is off and ready.

Quote:

Originally Posted by 67JimmyMO

Tom, yes I am still interested. If it was just surface rust on the carrier and the hardware is good that would be fine. Could you post a pic of it when you get a chance and let me know what the shipping is (65604)? Still no rush on my end...next week...next month...not a problem!

LOL...I'll post a pic when it is done.

Thanks, Tom

Brave71 · 08-10-2014, 12:30 PM

I'm looking for a nice set of vent glass shipped to 89015...thanks

rusted72' · 09-03-2014, 06:58 PM

Tom-i received the alternator brackets today.

thank you

**pimpston65** · 09-03-2014, 08:43 PM

is it too soon to ask about the antenna?

07-19-2014, 08:07 AM	#752
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,078	Re: 100's of misc parts from the last 6 trucks parted out Four blade fan 67-68 , single port vac. Found a washer bottle bracket in box of junk that came with truck. Shot me Paypal and I will get you paid. Thank you harold __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

07-19-2014, 01:10 PM	#753
rusted72' Registered User Join Date: Nov 2013 Location: Whittier, CA Posts: 120	Re: 100's of misc parts from the last 6 trucks parted out sounds good, can i get some pics before i commit? thank you

07-20-2014, 11:22 AM	#756
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Re: 100's of misc parts from the last 6 trucks parted out Here is a borrowed pic of a set of hangers. The small angle one is from the xmember above the rear axle. Thanks for looking. __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336

07-24-2014, 08:02 PM	#757
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 697	Re: 100's of misc parts from the last 6 trucks parted out Tom, my antenna and hardware arrived today. Thanks again! __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet"

07-26-2014, 09:57 AM	#758
Userone Registered User Join Date: Nov 2013 Location: White Hall, AR Posts: 72	Re: 100's of misc parts from the last 6 trucks parted out got any more radio deletes? i need one with brackets

07-28-2014, 09:49 PM	#759
JonnyC10 Account Suspended Join Date: Jul 2014 Location: NH Posts: 280	Re: 100's of misc parts from the last 6 trucks parted out Trailing arms? Pics and price shipped to 03809? Thanks.

08-02-2014, 05:03 PM	#760
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 697	Re: 100's of misc parts from the last 6 trucks parted out Hey Tom, I am looking for one blue armrest for my '71 C10 and two unmolested tail light wiring harnesses from the firewall all the way back to the buckets. LMK total including shipping to 78602. Thanks again! __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet"

08-03-2014, 01:46 PM	#761
Ccc925 Registered User Join Date: Mar 2014 Location: Nor cal Posts: 24	Re: 100's of misc parts from the last 6 trucks parted out Any 1972 cheyenne door panels (black)? Thanks pm me

08-03-2014, 01:49 PM	#762
Esetonni Registered User Join Date: Jul 2014 Location: Gastonia NC Posts: 11	Re: 100's of misc parts from the last 6 trucks parted out Do you have any cabs?

08-03-2014, 08:14 PM	#763
pontiacpro Registered User Join Date: Jul 2011 Location: hanover,pa Posts: 19	Re: 100's of misc parts from the last 6 trucks parted out Do you have a front centerline for the steering and if so how much? Thanks

08-04-2014, 04:00 PM	#764
GRADYS Performance Registered User Join Date: Dec 2013 Location: Columbus, Oh Posts: 366	Re: 100's of misc parts from the last 6 trucks parted out Do you have a throttle cable bracket for a mid 80s Q-jet with a TV cable hole for a 700R4 that bolts down with back carb bolts?

08-05-2014, 11:16 PM	#766
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,714	Re: 100's of misc parts from the last 6 trucks parted out A few parts that really need… The bolt that holds the muffler assembly on to the A/C compressor The Speaker to radio harness A solid mast radio antenna And last, the little 2 light bulb harness that go's to the A/C control ( I know it was a 2 bulb harness for 1968 not sure about other years. Please let me know. Thanks Steve

08-09-2014, 01:03 PM	#767
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: 100's of misc parts from the last 6 trucks parted out Guys, sorry for the delay. I've been on vacation again and working 12-14 days so online and truck parts time has been hard to come by. 67JimmyMO, Jody, Yes. I have it off and I'm acid dipping as it has some surface rust. It could ship next week if your still up for it. tjsblazer, I only have the bigger one. 14.00 shipped Userone, I just bought a truck with one but I'm not sure if I'm going to part it yet. If i do I'll try to remember you for it. JonnyC10, Yes I have a very nice pair. I acid dipped them which they didn't really need as they just some minor surface rust. 150.00 plus shipping. Shipping kinda spendy. LMK if the 150.00 is ok and I'll get a shipping cost. Jake1971, I have the harness from the firewall to the bumper but nothing good from there to the sockets. I should have the armrest but I'll have to look to comfirm. Ccc925, None that I'm willing to part with right now. Esetonni, Yes but shippng to NC would kill the deal. pontiacpro, 2wd draglink? If so what year and 1/2t or 3/4t? I have all of them. GRADYS Performance, All the TH700 tv cable brackets as I recall all bolt down to the intake which I do have. pimpston65, No HI note horns. Yes on the low. No T3's that I want to part with. Yes on antenna but couldn't get to pulling one for a couple weeks. burb71, The speaker harness is soldered to the speaker. I would cut one off. 7.50 mailed. No antenna and nothing on the 2 bulb harness. I will be gone on vacation again next Thursday through the following Wednesday. Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

08-09-2014, 03:09 PM	#769
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,078	Re: 100's of misc parts from the last 6 trucks parted out Tom do you have a interior fuse box/ harness for a 67-68, the original one I have has some internal issues and I do not have lights or wipers. I prefer a 67 with idiot light dash, but will take what you have. Thanks harold __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

08-09-2014, 05:05 PM	#770
pontiacpro Registered User Join Date: Jul 2011 Location: hanover,pa Posts: 19	Re: 100's of misc parts from the last 6 trucks parted out 1969 1/2 ton 2wd with manual steering. Price with shipping to 17331. Thanks



Register or Log In To remove these advertisements.

08-10-2014, 12:30 PM	#773
Brave71 Registered User Join Date: Sep 2013 Location: Henderson, NV Posts: 304	Re: 100's of misc parts from the last 6 trucks parted out I'm looking for a nice set of vent glass shipped to 89015...thanks

09-03-2014, 06:58 PM	#774
rusted72' Registered User Join Date: Nov 2013 Location: Whittier, CA Posts: 120	Re: 100's of misc parts from the last 6 trucks parted out Tom-i received the alternator brackets today. thank you

09-03-2014, 08:43 PM	#775
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,193	Re: 100's of misc parts from the last 6 trucks parted out is it too soon to ask about the antenna?

Register or Log In To remove these advertisements.