off it goes

[truckzilla]

Originally Posted by CHROMAHOLIC

Here's what it would look like....

That is so clean and sweet looking!

[KQQL IT]

Jim, I pushed the tail light reflector tabs in just a bit. Tightens up the gaps a bunch

[CHROMAHOLIC]

Cool, thanks for the tip....

[CHROMAHOLIC]

bumper details, it never ends....I need stop to thinkin' lol
one side just about done....

[UKNOWME]

What exactly did you do to remedy?

[CHROMAHOLIC]

Originally Posted by UKNOWME

What exactly did you do to remedy?

we did a lot work to the track, actually removed the rollers from the the piece windows and repositioned them to slide in the track and not bind. did a ton of metal work to both sides of the door so it's all straight now and actually did a little metal work on the curve of the window opening as well. it was a lot of work but the windows roll up down better than ever.

[FRENCHBLUE72]

The details are insane

[KQQL IT]

Jim why couldn't you raise the bracket up a bit, so the plate is flush with the bottom of the bumper?

[CHROMAHOLIC]

Originally Posted by KQQL IT

Jim why couldn't you raise the bracket up a bit, so the plate is flush with the bottom of the bumper?

that's a cool idea but it would probably tuck some plate up behind the bumper, I'm just that guy if it needs to be on there I want to see it all or not at all. we have already trimmed the the black inner plate section down to the exact same size as the plate and rounded the corners to match the plate. That way you shouldn't see too much of it when we're done

[KQQL IT]

Originally Posted by CHROMAHOLIC

that's a cool idea but it would probably tuck some plate up behind the bumper, I'm just that guy if it needs to be on there I want to see it all or not at all. we have already trimmed the the black inner plate section down to the exact same size as the plate and rounded the corners to match the plate. That way you shouldn't see too much of it when we're done

Gotcha, buried the plate on my roll pan and notched the rear bed sill, and unless you're 20' back you can't read the state on the top part.

[Low Elco]

Lawd, this truck is Bitc*in'!

[CHROMAHOLIC]

Originally Posted by Low Elco

Lawd, this truck is Bitc*in'!

thanks man...I appreciate it

[KQQL IT]

Waited to long to add the pic, 3/4 clear pennies made a bright tag light

[68Timber]

Originally Posted by KQQL IT

Waited to long to add the pic, 3/4 clear pennies made a bright tag light

The tail lights are tucked in nice.

[K20chevy]

Originally Posted by BRUISER

The tail lights are tucked in nice.

Looks really cool! how far did you have to tap them down?

[CHROMAHOLIC]

we finally got the doors and the one piece windows where we want them...
when glass was up, it had a small gap at the front of the door so we corrected that problem



next issue, window didn't roll all the way down in the door, so we trimmed the stops

[K20chevy]

Originally Posted by CHROMAHOLIC

we finally got the doors and the one piece windows where we want them...
when glass was up, it had a small gap at the front of the door so we corrected that problem



next issue, window didn't roll all the way down in the door, so we trimmed the stops

Awesome work as usual!

[KQQL IT]

Originally Posted by K20chevy

Looks really cool! how far did you have to tap them down?

1/8" maybe.

[rip2174]

When you removed the bracket on the firewall for the steering and brakes, did you do anything inside the cab to reinforce it?

[KQQL IT]

Thanks, Vice gripped the tabs and tapped the down with a hammer

[CHROMAHOLIC]

That does look killer

[Gregski]

Pros paint with the door hinges left on? Not being a smart alick just askin?

[CHROMAHOLIC]

not painting yet.....doing all the body skimming and and pros adjust gaps with the doors and hinges on

[74CustomK20]

I'd go white...

[CHROMAHOLIC]

going back factory colors....