1971 c10 stepside - Page 34 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

raull · 07-06-2012, 01:33 PM

Quote:

Originally Posted by Chvy2NV

I saw something in the garage that looked like a motor. But I'm not saying.... Shhhhh!!!! Still can't get the over the sound of the camaro.
Posted via Mobile Device

lol no secrets here , just no time , it will be at least until end of summer before i get to work on it again , anyways , yes i got all the parts back from machine shop , the block was bored over 20 and the crank and cam bearings standard as they were in good shape , as for the heads , well !!!! we did a little work on them

**67cheby** · 07-06-2012, 01:36 PM

SWEET ! looking forward to your fall progress !

raull · 07-06-2012, 01:42 PM

Quote:

Originally Posted by 67cheby

SWEET ! looking forward to your fall progress !

by then you will be done with your truck , then it will be my turn to entertain you with my build !!!!! lol

jmedero · 07-06-2012, 02:06 PM

Glad to see that the internals were good on that engine. It ran good on my end, you just never know what lurks on the inside.
Posted via Mobile Device

**67cheby** · 07-06-2012, 03:08 PM

Quote:

Originally Posted by raull

by then you will be done with your truck , then it will be my turn to entertain you with my build !!!!! lol

LOL, sounds good to me !

raull · 07-06-2012, 03:12 PM

Quote:

Originally Posted by jmedero

Glad to see that the internals were good on that engine. It ran good on my end, you just never know what lurks on the inside.
Posted via Mobile Device

come on !!! you know deep down inside we want stuff to be bad that way we have an excuse to go all out !!!!!

**CC69Rat** · 07-06-2012, 04:56 PM

Yeah, .. those cathedrals look at wee bit larger than they should be (?) Talk to us.. what's up ??

Chvy2NV · 07-06-2012, 05:06 PM

Hey Raul. Let me know when the assembly process is going to start on the motor. I Would love to be there watch the process as well as help with anything.
Posted via Mobile Device

70onB.A.D.'s · 07-07-2012, 11:24 AM

Hey Raul, the speaker pods that in the cab corners. Are those a weld in or bolt in type thing. Getting ready to do my stereo system in my Chevy and like those.

raull · 07-07-2012, 02:18 PM

Quote:

Originally Posted by CC69Rat

Yeah, .. those cathedrals look at wee bit larger than they should be (?) Talk to us.. what's up ??

lol, just some street porting ,some valve work with one piece ss bigger valves
comp springs ect ,

Quote:

Originally Posted by Chvy2NV

Hey Raul. Let me know when the assembly process is going to start on the motor. I Would love to be there watch the process as well as help with anything.
Posted via Mobile Device

will do sir !!!!!!

Quote:

Originally Posted by 70onB.A.D.'s

Hey Raul, the speaker pods that in the cab corners. Are those a weld in or bolt in type thing. Getting ready to do my stereo system in my Chevy and like those.

yes they are bolt on , if you go back to page 30 post # 739 i posted the link of the vendor , click on it and you will find all the info along with some pictures , take care

Delta9 · 07-08-2012, 12:25 AM

Quote:

Originally Posted by 70onB.A.D.'s

Hey Raul, the speaker pods that in the cab corners. Are those a weld in or bolt in type thing. Getting ready to do my stereo system in my Chevy and like those.

Those speaker brackets are heavy duty too. love the set i got.

AJohn6 · 07-15-2012, 03:24 PM

Wow! I am about 85% certain that I am going to TT my '71, but honestly scared to do it. I have never built anything forced induction. I think it will be fun though.

Adam

raull · 07-15-2012, 04:19 PM

Quote:

Originally Posted by AJohn6

Wow! I am about 85% certain that I am going to TT my '71, but honestly scared to do it. I have never built anything forced induction. I think it will be fun though.

Adam

it is a lot of fun once your are done and have it tune right , but not an easy road to go down to unless you like to build and have patience to deal with all the changes and mods you have to do , and do lots and lots of reaserch before you start building or you will end up doing things over and over

raull · 07-24-2012, 03:24 PM

small update !!! since im not working on the truck in the summer , i figure it will be a good time to tackle the tranny , lucky for me i have tech who build gm trannys for 20+ years here in our shop , the tranny was working fine but it need it some high end parts to be able to handle a little more horse power !!!!

Chvy2NV · 07-24-2012, 05:43 PM

oh yea!! Hit me up bud. I'll swing by.
Posted via Mobile Device

jmedero · 07-24-2012, 07:38 PM

That's it I'm moving down. Find me a spot. Lol
Posted via Mobile Device

raull · 07-25-2012, 09:42 AM

Quote:

Originally Posted by chvy2nv

Oh yea!! Hit me up bud. I'll swing by.
posted via mobile device

will do sir !!!!!!!!!

Quote:

Originally Posted by jmedero

that's it i'm moving down. Find me a spot. Lol
posted via mobile device

you are welcome to come down and join us downhere in the jungle !!

raull · 07-27-2012, 08:20 PM

i want to share with you guys the new member of our c10 family just a few miles from my house , its a 67 small window farm truck with lots of character , his user name is Chvy2NV , ill post his build thread once he starts it ,here a pix of the truck

Chvy2NV · 07-27-2012, 11:06 PM

Thank you Raul for the kind welcoming. Looking forward to a lot of truckin, wrenching and good times brother.

I will be posting pics up soon. Just had a real long day....
Posted via Mobile Device

jmedero · 07-28-2012, 12:11 AM

Nice find man. Raul your a good guy dude.... A very bad good influence. Lol
Posted via Mobile Device

69CST-V · 07-28-2012, 12:28 AM

Also welcome to the forum.
Posted via Mobile Device

c10seconds · 07-28-2012, 02:47 AM

Awesome! Welcome! You guys anywhere near delray beach? Ill be there starting tomorrow till nect Saturday.
Posted via Mobile Device

raull · 07-28-2012, 08:33 AM

Sure thing , we are just a little over an hour southwest of delray , if you can escape one afternoon pm me and ill try to get the guys toghether , !!!!

**67cheby** · 07-28-2012, 10:42 AM

too COOL !!

**FRENCHBLUE72** · 07-28-2012, 10:52 AM

Clean looking ride welcome to the board,..

07-06-2012, 01:36 PM	#827
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1971 c10 stepside SWEET ! looking forward to your fall progress ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

07-06-2012, 02:06 PM	#829
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 1971 c10 stepside Glad to see that the internals were good on that engine. It ran good on my end, you just never know what lurks on the inside. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

07-06-2012, 04:56 PM	#832
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,205	Re: 1971 c10 stepside Yeah, .. those cathedrals look at wee bit larger than they should be (?) Talk to us.. what's up ?? __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

07-06-2012, 05:06 PM	#833
Chvy2NV Registered User Join Date: Apr 2012 Location: So. Florida Posts: 873	Re: 1971 c10 stepside Hey Raul. Let me know when the assembly process is going to start on the motor. I Would love to be there watch the process as well as help with anything. Posted via Mobile Device

07-07-2012, 11:24 AM	#834
70onB.A.D.'s Registered User Join Date: Nov 2008 Location: Fort Gibson, Ok Posts: 84	Re: 1971 c10 stepside Hey Raul, the speaker pods that in the cab corners. Are those a weld in or bolt in type thing. Getting ready to do my stereo system in my Chevy and like those.

07-15-2012, 03:24 PM	#837
AJohn6 Knuckle head Join Date: Mar 2008 Location: NC Posts: 283	Re: 1971 c10 stepside Wow! I am about 85% certain that I am going to TT my '71, but honestly scared to do it. I have never built anything forced induction. I think it will be fun though. Adam __________________ Adam '71 SWB/Step http://67-72chevytrucks.com/vboard/s...d.php?t=291750 2017 Crew Cab Silverado LTZ with 6.2l, 8 Speed tuned by RPM in Garner, NC '00 Chevy 1500 6.0l Silverado Reg. Cab Short Bed '09 Chevy 1500 5.3l Silverado Crew Cab Short Bed (SOLD) 1971 LWB on 2014 1 ton chassis, L96 6.0LS / 6L90E http://67-72chevytrucks.com/vboard/s...d.php?t=796785 1969 LWB C10- Future project, possible AWD C10 on a 2002 Escalade Chassis.

07-24-2012, 03:24 PM	#839
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1971 c10 stepside small update !!! since im not working on the truck in the summer , i figure it will be a good time to tackle the tranny , lucky for me i have tech who build gm trannys for 20+ years here in our shop , the tranny was working fine but it need it some high end parts to be able to handle a little more horse power !!!! Attached Images __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

07-24-2012, 05:43 PM	#840
Chvy2NV Registered User Join Date: Apr 2012 Location: So. Florida Posts: 873	Re: 1971 c10 stepside oh yea!! Hit me up bud. I'll swing by. Posted via Mobile Device

07-24-2012, 07:38 PM	#841
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 1971 c10 stepside That's it I'm moving down. Find me a spot. Lol Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

07-27-2012, 08:20 PM	#843
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1971 c10 stepside i want to share with you guys the new member of our c10 family just a few miles from my house , its a 67 small window farm truck with lots of character , his user name is Chvy2NV , ill post his build thread once he starts it ,here a pix of the truck Attached Images __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

07-27-2012, 11:06 PM	#844
Chvy2NV Registered User Join Date: Apr 2012 Location: So. Florida Posts: 873	Re: 1971 c10 stepside Thank you Raul for the kind welcoming. Looking forward to a lot of truckin, wrenching and good times brother. I will be posting pics up soon. Just had a real long day.... Posted via Mobile Device

07-28-2012, 12:11 AM	#845
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 1971 c10 stepside Nice find man. Raul your a good guy dude.... A very bad good influence. Lol Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

07-28-2012, 12:28 AM	#846
69CST-V Registered User Join Date: Mar 2010 Location: Piper, KS Posts: 683	Re: 1971 c10 stepside Also welcome to the forum. Posted via Mobile Device __________________ Bryce '69 SWB Fleet Still Under Construction Company Trucks

07-28-2012, 02:47 AM	#847
c10seconds Registered User Join Date: Oct 2009 Location: gilbert,AZ Posts: 947	Re: 1971 c10 stepside Awesome! Welcome! You guys anywhere near delray beach? Ill be there starting tomorrow till nect Saturday. Posted via Mobile Device

07-28-2012, 08:33 AM	#848
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1971 c10 stepside Sure thing , we are just a little over an hour southwest of delray , if you can escape one afternoon pm me and ill try to get the guys toghether , !!!! __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul



Register or Log In To remove these advertisements.

07-28-2012, 10:42 AM	#849
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1971 c10 stepside too COOL !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

07-28-2012, 10:52 AM	#850
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: 1971 c10 stepside Clean looking ride welcome to the board,.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Register or Log In To remove these advertisements.