Crash's 69 K10

[Zoomin]

That's going to lay out as nice as the cab, Mark.

[Crash_OK]

Originally Posted by Zoomin

That's going to lay out as nice as the cab, Mark.

no doubt Steve...

[Crash_OK]

I just finished adding up my cost and time to date.. I will need to keep this until I die....

[Zoomin]

Originally Posted by Crash_OK

I just finished adding up my cost and time to date.. I will need to keep this until I die....

I never do that because I'm afraid I might.
Posted via Mobile Device

[mcbassin]

Originally Posted by Crash_OK

I just finished adding up my cost and time to date.. I will need to keep this until I die....

Well at least your labor is free

Looks like he's getting close to paint on the bed.

[Crash_OK]

Originally Posted by mcbassin

Well at least your labor is free

Looks like he's getting close to paint on the bed.

True, but that was not my biggest concern.


It does look that way. Kyle said it might be ready next weekend if all goes well. You going to come and help me get it installed?

[suspect]

Sounds good. Your inbox is full.

[Crash_OK]

Originally Posted by suspect

Sounds good. Your inbox is full.

I cleared it out.

[67c10rustbuket]

Looks great Mark, almost done I could be available if you need more help.


I sense a little subliminal marketing

[Crash_OK]

Originally Posted by 67c10rustbuket

Looks great Mark, almost done I could be available if you need more help.


I sense a little subliminal marketing

Thanks Dan.. I think I am going to see if my son can help.. But I will let you know if not..

I think you are right about the marketing.. I also think we will hear more about Kyle's business in the near future...

[Zoomin]

Subliminal marketing??

There's going to be a slight delay guys - Kyle will probably take a half day off since he will be with his wife Sara as their first child will be delivered tomorrow if she doesn't drop lil Zoomin Jr between now and in the morning.

[Crash_OK]

Originally Posted by Zoomin

Subliminal marketing??

There's going to be a slight delay guys - Kyle will probably take a half day off since he will be with his wife Sara as their first child will be delivered tomorrow if she doesn't drop lil Zoomin Jr between now and in the morning.

wishing them a safe and happy delivery...

[Crash_OK]

I decided to do something about the Sherman Tank ride characteristics of the truck. I realize it is a short wheel base lifted 4x4, but it still rides rough. I think the rear springs may be stock off of a later model chevy. Maybe off of a ¾ ton. The front springs may be for a ¾ ton as well. I decided on a 2.5" skyjscker 4 spring lift. I measured the height before are after and all for corners are within ½” of the readings before the change out. So the overall height is the same. I guess I will try to sell the old springs and blocks..












Old springs and blocks..



Anybody have a idea on what the old springs are worth.. They have been sandblasted, painted, and have all new poly bushing…

[Zoomin]

Have no idea on the worth, but did that solve the rough ride?

[Crash_OK]

Originally Posted by Zoomin

Have no idea on the worth, but did that solve the rough ride?

I will not know until I get the bed back on. I don't want to drive it without the bed, afraid it will throw a rock up and chip something.. I am sure it will be better just looking at how they are designed.. I will let you know more after I have a chance to drive it..

[71Sixer]

Curious to see how high the truck sits when you get the new springs on. I just installed the same kit on my project and it looks a little high with 33" tires. I just want to make sure the truck is going to still fit in my garage when done...I had 7" of clearance before I tore it all apart.

BTW great job on the truck and can't wait to see it when you get the bed done.

Here's a few pics of mine...still in the early stages.

[Crash_OK]

Originally Posted by 71Sixer

Curious to see how high the truck sits when you get the new springs on. I just installed the same kit on my project and it looks a little high with 33" tires. I just want to make sure the truck is going to still fit in my garage when done...I had 7" of clearance before I tore it all apart.

BTW great job on the truck and can't wait to see it when you get the bed done.

Here's a few pics of mine...still in the early stages.

It did not raise it more than 1/2" from what it was. There was some type of lift on the truck when I got it. The front springs may have been off of a 3/4 ton, they seemed super stiff. The rears are HD as well. There was a 2" lift blocks in the back before I installed the lift. I have not gotten to drive since the lift, but I really believe this will help the stiff ride I had.

Your build is looking great. Looking forward to see more progress.

[Gene]

Originally Posted by 71Sixer

Curious to see how high the truck sits when you get the new springs on. I just installed the same kit on my project and it looks a little high with 33" tires. I just want to make sure the truck is going to still fit in my garage when done...I had 7" of clearance before I tore it all apart.

BTW great job on the truck and can't wait to see it when you get the bed done.

Here's a few pics of mine...still in the early stages.

I had the same concerns, I am running a 4 inch lift with 35 inch tires. Mine clears by about an inch with 7 ft. Door
Posted via Mobile Device

[screaminchevypickup]

Very nice upgrade! Atleast you know what you have now..
Posted via Mobile Device

[Crash_OK]

Originally Posted by screaminchevypickup

Very nice upgrade! Atleast you know what you have now..
Posted via Mobile Device

Thanks Kyle.. You are right.. I did not know before. I do know that it was not stock.

Hope things are going well with your new addition to your family.

[Crash_OK]

We have paint on the bed… Great job by Kyle, I did not expect it to be done this quick. Hopefully I will be able to pick it up next weekend.

[Zoomin]

Your truck is gonna look incredible, Mark. It won't be long now!
Posted via Mobile Device

[Crash_OK]

Originally Posted by Zoomin

Your truck is gonna look incredible, Mark. It won't be long now!
Posted via Mobile Device

Thanks Steve... Hopefully, I will have it all together next weekend.. Not sure if I will ever really be finished with it

[VA72C10]

Beautiful!

[Crash_OK]

Originally Posted by VA72C10

Beautiful!

Thank you..