Glock's new project: "Fred" w/ 5.3L LS swap info - Page 38 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**nlped** · 09-30-2009, 02:28 PM

Okay, I'll give a couple of extra days. But don't try and turn into a drag a$$

Driveway Dreams · 09-30-2009, 02:31 PM

Awesome!!! Let me know if you want a hand out there Bob. I am not sure what is planned for me this weekend, but I would be more than happy to come help if I can.

glock35ipsc · 09-30-2009, 02:35 PM

Quote:

Originally Posted by Driveway Dreams

Awesome!!! Let me know if you want a hand out there Bob. I am not sure what is planned for me this weekend, but I would be more than happy to come help if I can.

Will do. I'm going to go get it tomorrow, then I'll check it out to see if it's going to need brakes or seals or??? I'll probably try to throw it in Saturday morning.

Quote:

Originally Posted by nlped

Okay, I'll give a couple of extra days. But don't try and turn into a drag a$$

OK, OK, I'll try. I promise!!!

Driveway Dreams · 09-30-2009, 03:36 PM

Dang my work schedule! I wont be able to help. But I will sure watch for the updates as to how it goes. Good luck on it!

JohnC · 09-30-2009, 03:37 PM

As will all the other Fred followers.

rongstad · 09-30-2009, 04:23 PM

Quote:

Originally Posted by JohnC

As will all the other Fred followers.

X 2.............me toooooooo

rongstad · 09-30-2009, 04:24 PM

Quote:

Originally Posted by nlped

Okay Bob, now get on with the E85 stuff and the A/C stuff. It's been nearly 6 days since you got the truck up and running. What is the hold up?

yeah the AC stuff............lol

menace121978 · 09-30-2009, 10:58 PM

glad he hasnt realized he has a broken arm! jeez...

and i'll be here waiting like the rest of the gang!

GREAT news though, our loan mod should be done on our 1st in the next 2 weeks!!!

then its hello 6.0!!

glock35ipsc · 10-01-2009, 09:11 AM

Sweet Dennis, that's awesome!!! I'm digging that color BTW!

OK, so I sorta rigged up some tailpipes last night. They actually turned out pretty decent. I tripped across the tailpipes off my old 03 a couple days ago in my steel pile. I replaced them with a 3" single system when I put the blower on it. I forgot I had them!

They are the same size, 2.25", and have the 4" x 20-something inch tips on them. I managed to get them to look fairly even coming straight out the back about frame width.

Fred sounds SOOOOO much better now!!

I don't like it when the exhaust just dumps over the axle or before the axle. Don't like the sound, and it just seems incomplete. It actually sounds real good now, and I love the deep rumble that those big tips make. I was going to put Flows on soon, but this sounds and looks good enough to hold me over until next year at least.

I'm going to go pick up the rear end at lunch today!

glock35ipsc · 10-01-2009, 05:31 PM

OK, so I didn't get the rear end at lunch, but I'll be leaving work in about 20 minutes to go get it.

I sold some more parts today, so I have enough for a couple new tires now.

Driveway Dreams · 10-01-2009, 05:57 PM

Get it in there like yesterday man!

Codys87 · 10-01-2009, 06:35 PM

New tires means a video of the old ones going up in smoke!!!

menace121978 · 10-01-2009, 10:34 PM

^^^ thanks what i'm talking about!!

Driveway Dreams · 10-01-2009, 11:35 PM

Is that axle in yet?

hessian18 · 10-02-2009, 12:33 AM

Yea what ^^^^^ he said !!

ahahahaahha

Man I cant wait to get started on my truck

**nlped** · 10-02-2009, 08:06 AM

Are you really working on your truck, or are you still drivin' around smilin'?

68 TT · 10-02-2009, 11:33 AM

Did you get the cover off the new rear end to see what type of carrier it is?

I know it has 30-spline axles but it could have a gov-bomb or a clutch type posi carrier or even be an open carrier.

JohnC · 10-02-2009, 11:47 AM

Come on Bob we need updates!!!

glock35ipsc · 10-02-2009, 11:55 AM

Quote:

Originally Posted by Driveway Dreams

Is that axle in yet?

Quote:

Originally Posted by hessian18

Yea what ^^^^^ he said !!

ahahahaahha

Man I cant wait to get started on my truck

LOL, nope! I decided to be a couch potato last night.

Quote:

Originally Posted by nlped

Are you really working on your truck, or are you still drivin' around smilin'?

Been driving it every day since Saturday! I have over 500 miles on him so far, and just finished the second tank of fuel this morning about a mile away from work. The $25 Shell card I got from my debit card rewards points filled up the driver tank a couple days ago, so the third tank will be free to drive on.

Quote:

Originally Posted by 68 TT

Did you get the cover off the new rear end to see what type of carrier it is?

I know it has 30-spline axles but it could have a gov-bomb or a clutch type posi carrier or even be an open carrier.

Haven't touch it yet, it's still in the bed, but I'm pretty sure it's an open carrier.

glock35ipsc · 10-02-2009, 03:12 PM

Well good grief, Charlie Brown!!! Not one parts store in this town seems to carry more than 2 wheel studs at a time! Not even the tire shops!

So I'll guess I'll just go get all new lug nuts. At least I know Big-O has both sizes that I need.

I was at least able to get a diff cover gasket, gear oil, and a couple cans of brake cleaner. I'll pull the cover tonight and check the internals out. Then tomorrow after I get the spring pads and shock mounts welded on, I'll put the diff cover back on and fill with lube. The diff gasket seems to be the only thing that leaked, so I didn't get axle seals for now.

JohnC · 10-02-2009, 03:13 PM

You go man!!!!

glock35ipsc · 10-02-2009, 03:20 PM

Damn, posted 1 minute after I did! You stalking me?

**nlped** · 10-02-2009, 03:21 PM

Cool!!!

JohnC · 10-02-2009, 05:05 PM

Uh uh

menace121978 · 10-02-2009, 07:09 PM

hey, did you ever get the pedal from rancho? just curious... and how is it your sig says 3.42's? putting the carriage before the horses arent ya?!

pm sent too..

09-30-2009, 02:28 PM	#926
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: Glock's new project: "Fred" Okay, I'll give a couple of extra days. But don't try and turn into a drag a$$ __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

09-30-2009, 02:31 PM	#927
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Glock's new project: "Fred" Awesome!!! Let me know if you want a hand out there Bob. I am not sure what is planned for me this weekend, but I would be more than happy to come help if I can. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

09-30-2009, 03:36 PM	#929
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Glock's new project: "Fred" Dang my work schedule! I wont be able to help. But I will sure watch for the updates as to how it goes. Good luck on it! __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

09-30-2009, 03:37 PM	#930
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: Glock's new project: "Fred" As will all the other Fred followers.

09-30-2009, 10:58 PM	#933
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Glock's new project: "Fred" glad he hasnt realized he has a broken arm! jeez... and i'll be here waiting like the rest of the gang! GREAT news though, our loan mod should be done on our 1st in the next 2 weeks!!! then its hello 6.0!! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

10-01-2009, 09:11 AM	#934
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: Glock's new project: "Fred" Sweet Dennis, that's awesome!!! I'm digging that color BTW! OK, so I sorta rigged up some tailpipes last night. They actually turned out pretty decent. I tripped across the tailpipes off my old 03 a couple days ago in my steel pile. I replaced them with a 3" single system when I put the blower on it. I forgot I had them! They are the same size, 2.25", and have the 4" x 20-something inch tips on them. I managed to get them to look fairly even coming straight out the back about frame width. Fred sounds SOOOOO much better now!! I don't like it when the exhaust just dumps over the axle or before the axle. Don't like the sound, and it just seems incomplete. It actually sounds real good now, and I love the deep rumble that those big tips make. I was going to put Flows on soon, but this sounds and looks good enough to hold me over until next year at least. I'm going to go pick up the rear end at lunch today! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE Last edited by glock35ipsc; 10-01-2009 at 09:12 AM.

10-01-2009, 05:31 PM	#935
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: Glock's new project: "Fred" OK, so I didn't get the rear end at lunch, but I'll be leaving work in about 20 minutes to go get it. I sold some more parts today, so I have enough for a couple new tires now. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

10-01-2009, 05:57 PM	#936
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Glock's new project: "Fred" Get it in there like yesterday man! __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

10-01-2009, 06:35 PM	#937
Codys87 Registered User Join Date: Jan 2008 Location: Rockwall, TX Posts: 48	Re: Glock's new project: "Fred" New tires means a video of the old ones going up in smoke!!! __________________ 85 SWB 6.0 swap/heads/cam/pistons/headers/4L60E/3.73 posi/one piece windows/working towards air bags 04 Avalanche/9 inch lift/wheels 20x12 with 35 inch tires

10-01-2009, 10:34 PM	#938
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Glock's new project: "Fred" ^^^ thanks what i'm talking about!! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

10-01-2009, 11:35 PM	#939
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Glock's new project: "Fred" Is that axle in yet? __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

10-02-2009, 12:33 AM	#940
hessian18 Gen III Power Join Date: Sep 2007 Location: Hesperia CA Posts: 318	Re: Glock's new project: "Fred" Yea what ^^^^^ he said !! ahahahaahha Man I cant wait to get started on my truck __________________ ---Bob--- '81 Long Box. 2005 5.3l Vortec and 2005 4L80e coming soon...

10-02-2009, 08:06 AM	#941
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: Glock's new project: "Fred" Are you really working on your truck, or are you still drivin' around smilin'? __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

10-02-2009, 11:33 AM	#942
68 TT Still plays with trucks Join Date: Jul 2009 Location: Spokane, WA Posts: 3,556	Re: Glock's new project: "Fred" Did you get the cover off the new rear end to see what type of carrier it is? I know it has 30-spline axles but it could have a gov-bomb or a clutch type posi carrier or even be an open carrier.

10-02-2009, 11:47 AM	#943
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: Glock's new project: "Fred" Come on Bob we need updates!!!



Register or Log In To remove these advertisements.

10-02-2009, 03:12 PM	#945
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: Glock's new project: "Fred" Well good grief, Charlie Brown!!! Not one parts store in this town seems to carry more than 2 wheel studs at a time! Not even the tire shops! So I'll guess I'll just go get all new lug nuts. At least I know Big-O has both sizes that I need. I was at least able to get a diff cover gasket, gear oil, and a couple cans of brake cleaner. I'll pull the cover tonight and check the internals out. Then tomorrow after I get the spring pads and shock mounts welded on, I'll put the diff cover back on and fill with lube. The diff gasket seems to be the only thing that leaked, so I didn't get axle seals for now. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

10-02-2009, 03:13 PM	#946
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: Glock's new project: "Fred" You go man!!!!

10-02-2009, 03:20 PM	#947
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: Glock's new project: "Fred" Damn, posted 1 minute after I did! You stalking me? __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

10-02-2009, 03:21 PM	#948
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: Glock's new project: "Fred" Cool!!! __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

10-02-2009, 05:05 PM	#949
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: Glock's new project: "Fred" Uh uh

10-02-2009, 07:09 PM	#950
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Glock's new project: "Fred" hey, did you ever get the pedal from rancho? just curious... and how is it your sig says 3.42's? putting the carriage before the horses arent ya?! pm sent too.. __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list Last edited by menace121978; 10-02-2009 at 07:11 PM.

Register or Log In To remove these advertisements.