AL Parting out '72 GMC - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gmc1971harwich · 11-28-2010, 06:01 PM

is the seat still available? if so would you consider shipping to 02645?

faribran · 11-28-2010, 06:50 PM

The speedo cable and seat are both still available. Shipping for the seat is going to cost about $75. If you are still interested let me know and I'll pack it up to ship.

Richard

faribran · 11-28-2010, 10:06 PM

Quote:

Originally Posted by Six862m6

Any chance the harness under the dash is already butchered and you'd cut off the pigtail for the reverse light switch with 3" or so of wire, shipped to 46143?

Thanks,
David

David the harness is actually in really good shape and I would prefer not to cutt it at this time.

Richard

faribran · 11-28-2010, 10:08 PM

Quote:

Originally Posted by budnikguy

PayPal sent!!

I have already boxed up the mirrors and will mail them out tomorrow.

Richard

faribran · 11-29-2010, 11:25 AM

Back to the top, it's a new day!

cpisani70@aol.com · 11-29-2010, 03:22 PM

looking for power steering pump bracket is it still there and i would need a pic so i could see how it bolts up so i can be sure it will fit Thanx

faribran · 11-29-2010, 03:39 PM

It's still on it. I will have to get a picture posted up when I get home from work today.

faribran · 11-29-2010, 03:42 PM

Quote:

Originally Posted by cpisani70@aol.com

looking for power steering pump bracket is it still there and i would need a pic so i could see how it bolts up so i can be sure it will fit Thanx

But the one that I have is the one that bolts to the water pump on the drivers side of the engine.

faribran · 11-29-2010, 05:58 PM

Just another bump to the top.

faribran · 11-29-2010, 11:22 PM

One more bump for the day

Mr.C · 11-29-2010, 11:46 PM

If it has not been sold please put me in line for the dash pad, also how much for head liner with trim to 53073? Could you post a better pic of the steering wheel if it is still up for grabs? I may have missed it but is it disc or drum?

ralphie628 · 11-29-2010, 11:53 PM

did the throttle cable sell the gas pedal assembly?

faribran · 11-30-2010, 12:45 AM

The throttle cable and bracket are still available are you still interested?
Posted via Mobile Device

Livrat · 11-30-2010, 01:20 AM

Richard,
How much for the engine mount towers shipped to 98168?
Thanks!!

faribran · 11-30-2010, 11:34 AM

Quote:

Originally Posted by Livrat

Richard,
How much for the engine mount towers shipped to 98168?
Thanks!!

$40 shipped to you.

Livrat · 11-30-2010, 12:25 PM

Quote:

Originally Posted by faribran

$40 shipped to you.

Sounds good.. Please PM me with your payment preferences..

Would you happen to have the mounting "cups" that bolt to the engine too?

Thanks!

faribran · 11-30-2010, 12:57 PM

Quote:

Originally Posted by Mr.C

If it has not been sold please put me in line for the dash pad, also how much for head liner with trim to 53073? Could you post a better pic of the steering wheel if it is still up for grabs? I may have missed it but is it disc or drum?

The headliner has been sold. I will post up a picture of the steering wheel tonight, if you are interested in the dash pad you are the next in line. And the the front end is disc, the rear is drums. Let me know if you have anymore questions please.

Quote:

Originally Posted by Livrat

Sounds good.. Please PM me with your payment preferences..

Would you happen to have the mounting "cups" that bolt to the engine too?

Thanks!

I'm sorry I don't have the cups and PM sent

Livrat · 11-30-2010, 01:10 PM

Paypal sent for the engine towers... Thank you!!

faribran · 11-30-2010, 03:24 PM

Quote:

Originally Posted by Livrat

Paypal sent for the engine towers... Thank you!!

Will pull them off the truck tonight(weather permitting) and ship tomorrow. If the weather does cause some problems I will ship within the next day or so.

V/R

Richard

legendary · 11-30-2010, 03:40 PM

I am just up the road in Atlanta...how much for the seat shipped to 30306?

**too much stuff** · 11-30-2010, 03:45 PM

There is a heat shield down low on the pass side firewall. It attaches with 2 screws from inside the cab. How much for that? and is the glove box door for sale? Eric

faribran · 11-30-2010, 04:38 PM

Quote:

Originally Posted by legendary

I am just up the road in Atlanta...how much for the seat shipped to 30306?

I can do $135 shipped to the closest AAA Cooper terminal to the zip code you listed. This is the address to the terminal:
SOUTH ATLANTA AREA
4975 OLD GRANT ROAD,
ELLENWOOD, GA ZIP: 30294
you would need to pick up at the dock... Residential delivery charges are killer.

Quote:

Originally Posted by too much stuff

There is a heat shield down low on the pass side firewall. It attaches with 2 screws from inside the cab. How much for that? and is the glove box door for sale? Eric

How does $40 shipped sound?

**too much stuff** · 11-30-2010, 04:55 PM

Is that for both pieces? Also, are there exhaust brackets on both sides of the frame?
Eric

faribran · 11-30-2010, 04:59 PM

Quote:

Originally Posted by too much stuff

Is that for both pieces? Also, are there exhaust brackets on both sides of the frame?
Eric

Yes that is for both pieces. And I'm not sure if they are there, I will have to check when I get home.

Richard

gmc1971harwich · 11-30-2010, 10:53 PM

what would be the total cost for the seat + shipping to 02645

11-28-2010, 06:01 PM	#76
gmc1971harwich Registered User Join Date: Nov 2008 Location: Cape cod, ma. Posts: 394	Re: Parting out '72 GMC is the seat still available? if so would you consider shipping to 02645?

11-28-2010, 06:50 PM	#77
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC The speedo cable and seat are both still available. Shipping for the seat is going to cost about $75. If you are still interested let me know and I'll pack it up to ship. Richard __________________ "

11-29-2010, 11:25 AM	#80
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC Back to the top, it's a new day! __________________ "

11-29-2010, 03:22 PM	#81
cpisani70@aol.com Registered User Join Date: Oct 2010 Location: Wallingford CT Posts: 260	Re: Parting out '72 GMC looking for power steering pump bracket is it still there and i would need a pic so i could see how it bolts up so i can be sure it will fit Thanx

11-29-2010, 03:39 PM	#82
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC It's still on it. I will have to get a picture posted up when I get home from work today. __________________ "

11-29-2010, 05:58 PM	#84
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC Just another bump to the top. __________________ "

11-29-2010, 11:22 PM	#85
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC One more bump for the day __________________ "

11-29-2010, 11:46 PM	#86
Mr.C Registered User Join Date: Nov 2010 Location: Plymouth, WI Posts: 174	Re: Parting out '72 GMC If it has not been sold please put me in line for the dash pad, also how much for head liner with trim to 53073? Could you post a better pic of the steering wheel if it is still up for grabs? I may have missed it but is it disc or drum? __________________ How about you go over and introduce yourself, build me up, that way I don't have to brag about myself later.

11-29-2010, 11:53 PM	#87
ralphie628 Registered User Join Date: Dec 2009 Location: Chatsworth CA Posts: 243	Re: Parting out '72 GMC did the throttle cable sell the gas pedal assembly?

11-30-2010, 12:45 AM	#88
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC The throttle cable and bracket are still available are you still interested? Posted via Mobile Device __________________ "

11-30-2010, 01:20 AM	#89
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Parting out '72 GMC Richard, How much for the engine mount towers shipped to 98168? Thanks!!

11-30-2010, 01:10 PM	#93
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Parting out '72 GMC Paypal sent for the engine towers... Thank you!!

11-30-2010, 03:40 PM	#95
legendary Registered User Join Date: Nov 2010 Location: Atlanta, GA Posts: 154	Re: Parting out '72 GMC I am just up the road in Atlanta...how much for the seat shipped to 30306? __________________ Best Regards, Leon 1970 C/10 LWB Cummins Turbo - Build in Progress Many other toys as well...

11-30-2010, 03:45 PM	#96
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,715	Re: Parting out '72 GMC There is a heat shield down low on the pass side firewall. It attaches with 2 screws from inside the cab. How much for that? and is the glove box door for sale? Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-30-2010, 04:55 PM	#98
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,715	Re: Parting out '72 GMC Is that for both pieces? Also, are there exhaust brackets on both sides of the frame? Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto



Register or Log In To remove these advertisements.

11-30-2010, 10:53 PM	#100
gmc1971harwich Registered User Join Date: Nov 2008 Location: Cape cod, ma. Posts: 394	Re: Parting out '72 GMC what would be the total cost for the seat + shipping to 02645

Register or Log In To remove these advertisements.