CA 1971 GMC BB Complete Part Out - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ajgriffin · 12-18-2013, 08:10 PM

Put me in line for pedal to carb

Tinkermc · 12-18-2013, 09:11 PM

How about complete grill with hood piece and fender eyebrow mouldings? shipping 23901

**RogerKoop** · 12-19-2013, 09:40 AM

I'm interested in the Transmission Kick down Harness. Is it complete and uncut?

budnikguy · 12-19-2013, 10:50 PM

slider pics... works as it should..latch has surface rust needs to be cleaned up..other than that, looks good!

Quote:

Originally Posted by Critterman71

I want the slider window as well depending on the shape of it and shipping cost. wish I was closer I want the rolling chassis as well but to far for me on that.

budnikguy · 12-19-2013, 10:54 PM

Here is what was there for cruise control...

Quote:

Originally Posted by 71blksuper4x4

Got pics of cruise control pieces, tach dash, washer jug holder and front driver steel wheel thanks trevor

budnikguy · 12-19-2013, 10:59 PM

How many would you want???? here is a stack

Quote:

Originally Posted by 68Custom

Do you have door striker shims on the driver side available? I'm looking for a couple, thanks!

John Pasinski · 12-20-2013, 05:35 PM

Has Critterman commited to the slider, is it definitely sold?

RaceAGMC · 12-20-2013, 06:02 PM

Quote:

Originally Posted by RaceAGMC

How about the high hump trans cover? Condition? Shipped to 28216?

Any update on this? Haven't gotten a response.

budnikguy · 12-20-2013, 06:14 PM

Here is the hi hump...will get it unbloted tomorrow....$85 shipped bolts included!

Adam

Quote:

Originally Posted by RaceAGMC

Any update on this? Haven't gotten a response.

**gmc 2500 4x4** · 12-20-2013, 06:17 PM

any luck pulling fenders yet

budnikguy · 12-20-2013, 06:23 PM

Have yet to hear back from Critterman...

Quote:

Originally Posted by John Pasinski

Has Critterman commited to the slider, is it definitely sold?

budnikguy · 12-20-2013, 06:26 PM

Not yet...hope to get that done this weekend!

Quote:

Originally Posted by gmc 2500 4x4

any luck pulling fenders yet

**gmc 2500 4x4** · 12-20-2013, 06:38 PM

thanx,keep me posted

RaceAGMC · 12-21-2013, 02:15 AM

Quote:

Originally Posted by budnikguy

Here is the hi hump...will get it unbloted tomorrow....$85 shipped bolts included!

Adam

Pm sent.

ajgriffin · 12-21-2013, 03:33 AM

Quote:

Originally Posted by ajgriffin

Put me in line for pedal to carb

Gas pedal still available?

**71blksuper4x4** · 12-21-2013, 02:08 PM

I will pass on the cruise parts as the brackets weren't what I was looking for. Thanks for the pics and taking the time. If that front wheel turns out to be wider than the rest, I am still in for it. Trevor

the ideaman · 12-21-2013, 10:16 PM

I'll take the high hump and pedal assembly. Tell me shipped to 93611.

Luke

kaphillips · 12-21-2013, 11:29 PM

Looks like 71blksupper4x4 passed on the cruise stuff. I think I was next in line. Not all of this is the same as 70 cruise stuff. I would like a price on the vaccum servo to include the chain and the throttle rod clip at the end ( I don't need the mounting bracket for the servo). The transducer mounting bracket and its bolts (I don't need the 3 wire transducer itself as a 70 is a 2 wire version). Price shipped to Amarillo TX 79106, please. Thanks, and have a very merry Christmas.

downbytheriver · 12-22-2013, 01:52 AM

i will take the high hump if others pass.

paypal ready

rusty knuckles 5 · 12-22-2013, 11:29 PM

HI! i am interested in the big block engine wire harness if is still up for sale and the tranmission down shift cable and switch. thank you merry christmas !

John Pasinski · 12-23-2013, 06:28 PM

Quote:

Originally Posted by budnikguy

Have yet to hear back from Critterman...

Anything yet on Critterman's decision?

budnikguy · 12-24-2013, 02:21 AM

Hi Hump is sold....have a couple ahead of you on the deal assembly

Quote:

Originally Posted by the ideaman

I'll take the high hump and pedal assembly. Tell me shipped to 93611.

Luke

budnikguy · 12-24-2013, 02:32 AM

drivers side front wheel...

Quote:

Originally Posted by 71blksuper4x4

Still interested in tach and cruise items. The wheel I need a pic of is the one that is on the driver side front of the truck. It looks like a deeper dished 16.5 than the others, sorry about that. I am looking for a 8.25 deep 16.5.
Also the piece that is (in pic #6 on the first page) on top of the log chain on the passenger tool box appears to be cruise related as well. Trevor

budnikguy · 12-24-2013, 02:43 AM

Pulled the diff cover...and has original 410...pics for ya

Quote:

Originally Posted by JimmyBonz

IF this truck has the "EATON" Rear-End, I could Really use the Center Section!!!!
See it's a 4.10 so Let ME Hear from You PLEASE?????????????
Jimmy

budnikguy · 12-24-2013, 02:48 AM

Here is the antenna ...removed

Quote:

Originally Posted by John Pasinski

I'll be second in line for the slider window shipped to 32821.
How much for the radio antenna shipped to the same zip?

12-18-2013, 08:10 PM	#76
ajgriffin Registered User Join Date: Feb 2008 Location: Carson, CA Posts: 581	Re: 1971 GMC BB Complete Part Out Put me in line for pedal to carb __________________ 69 C10 SWB -- Left to me by a loving father. Finishing the build we never got the chance to do together

12-18-2013, 09:11 PM	#77
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,027	Re: 1971 GMC BB Complete Part Out How about complete grill with hood piece and fender eyebrow mouldings? shipping 23901

12-19-2013, 09:40 AM	#78
RogerKoop Senior Member Join Date: Nov 2012 Location: Shawnee, KS Posts: 1,807	Re: 1971 GMC BB Complete Part Out I'm interested in the Transmission Kick down Harness. Is it complete and uncut? __________________ Roger Koop

12-20-2013, 05:35 PM	#82
John Pasinski Registered User Join Date: Aug 2007 Location: orlando Posts: 456	Re: 1971 GMC BB Complete Part Out Has Critterman commited to the slider, is it definitely sold? __________________ A man's thoughts devise his ways; but it's GOD that directs his steps.

12-20-2013, 06:17 PM	#85
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,894	Re: 1971 GMC BB Complete Part Out any luck pulling fenders yet

12-20-2013, 06:38 PM	#88
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,894	Re: 1971 GMC BB Complete Part Out thanx,keep me posted

12-21-2013, 02:08 PM	#91
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,150	Re: 1971 GMC BB Complete Part Out I will pass on the cruise parts as the brackets weren't what I was looking for. Thanks for the pics and taking the time. If that front wheel turns out to be wider than the rest, I am still in for it. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

12-21-2013, 10:16 PM	#92
the ideaman Registered User Join Date: May 2009 Location: Central Valley,ca Posts: 174	Re: 1971 GMC BB Complete Part Out I'll take the high hump and pedal assembly. Tell me shipped to 93611. Luke

12-21-2013, 11:29 PM	#93
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: 1971 GMC BB Complete Part Out Looks like 71blksupper4x4 passed on the cruise stuff. I think I was next in line. Not all of this is the same as 70 cruise stuff. I would like a price on the vaccum servo to include the chain and the throttle rod clip at the end ( I don't need the mounting bracket for the servo). The transducer mounting bracket and its bolts (I don't need the 3 wire transducer itself as a 70 is a 2 wire version). Price shipped to Amarillo TX 79106, please. Thanks, and have a very merry Christmas.

12-22-2013, 01:52 AM	#94
downbytheriver Registered User Join Date: Aug 2011 Location: Saint Augustine, FL Posts: 195	Re: 1971 GMC BB Complete Part Out i will take the high hump if others pass. paypal ready __________________ 68 SWB 5.3 turbo build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=578220

12-22-2013, 11:29 PM	#95
rusty knuckles 5 Registered User Join Date: Dec 2011 Location: coulterville calif Posts: 263	Re: 1971 GMC BB Complete Part Out HI! i am interested in the big block engine wire harness if is still up for sale and the tranmission down shift cable and switch. thank you merry christmas !



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.