![]() |
|
![]() |
#1 |
Registered User
Join Date: Aug 2009
Location: Spring Grove Il
Posts: 122
|
Re: Build: I've never done bodywork...but I can change if I have to! (bagged '67 SWB
looking good!
__________________
Dustydog 1940 Ford 2D SDN 1970 GMC SB 2004 C5 Vette |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jul 2011
Location: Farmville, Va
Posts: 3,026
|
Re: Build: I've never done bodywork...but I can change if I have to! (bagged '67 SWB
You should be very proud of your work on the truck, the new compressor will help for a long time to come. The shop is wonderful, you may need to install an exhaust fan for painting or it may be there I just didn't see 1. Keep up the good work and pics.
|
![]() |
![]() |
![]() |
#3 |
Registered Mail
Join Date: Jun 2006
Location: Alberta, Canada
Posts: 513
|
Re: Build: I've never done bodywork...but I can change if I have to! (bagged '67 SWB
Time to update the Thread a little, may have lost a few during the summer, Just so much going on I had to wait till winter before I could start on the truck again, I think that will be a growing theme.
Finally finished my shop, and built another one for farm equipment during the summer...Also had our son, sure takes up a lot of time and energy, so now the goal is to finish it before he is One! I told him if he didn't finish eating his meal, I'd make him drive a Ford when he's older... I then got the stare down, I don't think he found it amusing that I would even joke about that. Took forever to align the diff to weld in the perches just perfect, just didnt want to make any major errors, so I had to measure 14 times and weld once. I am certain that custom ford 9 weighs twice what the stock C-10 was. just a little test fit, also made some spacers out if 1x4 tubing, so the rear would bottom out in the C-notch test fit the doors and front fenders, some how I got a '68 and up cab+rad mounts kit, so I am not sure if the cab mounts are thicker or not? I know the rad support mounts don't fit, but if I change the rad support mounts to '67, I am not sure if I have to change the cab mounts as well?
__________________
'67 chev 496, lwb to swb, bagged - pro street project |
![]() |
![]() |
![]() |
#4 |
Registered Mail
Join Date: Jun 2006
Location: Alberta, Canada
Posts: 513
|
Re: Build: I've never done bodywork...but I can change if I have to! (bagged '67 SWB
I didn't want to get the high hump and sacrafice even more leg room for anyone sitting in the middle (even though that would be rare), so I decided to make my own mid height hump, just high enough to clear the tranny, it's about 1-1/4" high
I just simply slid the cut piece forward as it already had the right curve for the exsisting part of the hump. All welded in, just need to smooth it out tomorrow, had to take the cab off again to finish up welding, I think the cab is going to be ready for paint pretty soon, hopefully this is the last time I have to take it off!!
__________________
'67 chev 496, lwb to swb, bagged - pro street project |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: May 2010
Location: Edmonton, Alberta
Posts: 3,847
|
Re: Build: I've never done bodywork...but I can change if I have to! (bagged '67 SWB
Looking good! I understand how hard it is to find time to work on these things. I just had another kid as well
![]()
__________________
--------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67 |
![]() |
![]() |
![]() |
#6 | |
Registered Mail
Join Date: Jun 2006
Location: Alberta, Canada
Posts: 513
|
Re: Build: I've never done bodywork...but I can change if I have to! (bagged '67 SWB
Quote:
Yea, I still need to grab that piece from ya, I want to keep it as back up, I might just try to bondo it, as I am not sure if I can handle welding such a sensitive area, if I have to add too much filler for my liking, I will use your piece... I should come pick that up soon, I am getting married this weekend, so I might still be a little bit, I hope there aren't any interest charges on that!? haha!
__________________
'67 chev 496, lwb to swb, bagged - pro street project |
|
![]() |
![]() |
![]() |
#7 | |
Registered User
Join Date: May 2010
Location: Edmonton, Alberta
Posts: 3,847
|
Re: Build: I've never done bodywork...but I can change if I have to! (bagged '67 SWB
Quote:
![]()
__________________
--------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67 |
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Aug 2008
Location: Red Deer ab canada
Posts: 1,250
|
Re: Build: I've never done bodywork...but I can change if I have to! (bagged '67 SWB
Love the "old-school" weld wheels, looks really good!
__________________
1972 factory 2 Wheel Drive Blazer-Sold 1972 K10 4X4-Sold 1971 Chevrolet Cheyenne/10-Sold 1970 Chevrolet C/10-Sold 1968 GMC 4X4-Project 1968 Chevrolet C/10 Pro Street 1970 GMC 3/4 Ton-Parts 1997 2WD 2DR Yukon-Sweet http://67-72chevytrucks.com/vboard/s...d.php?t=335664 |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Apr 2011
Location: Mustang, Oklahoma
Posts: 2,806
|
Re: Build: I've never done bodywork...but I can change if I have to! (bagged '67 SWB
I'm still watching you too
![]()
__________________
Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
|
Re: Build: I've never done bodywork...but I can change if I have to! (bagged '67 SWB
Looking good!!!
__________________
James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587 |
![]() |
![]() |
![]() |
#11 |
Registered Mail
Join Date: Jun 2006
Location: Alberta, Canada
Posts: 513
|
Re: Build: I've never done bodywork...but I can change if I have to! (bagged '67 SWB
yea, I know it gives it more of a dated look by using older style wheels, but I hope it works out well with the aluminum side moulding package. sure was a pain to try fit 15x14 rims on a narrowed 9" with disc brakes while still utilizing stock swing arms and adding that 1" spacer so it would drop all the way down... really isn't much room in there for all that.
thanks. thanks! You guys are awesome at body and paint, not sure you'll be saying looking good for much longer, haha! but I really hope I can get some positive criticism, if anyone notices I am doing something stupidly wrong or should redo. Haven't have a chance to work on it the last few days, recovering from goin out for the stag...
__________________
'67 chev 496, lwb to swb, bagged - pro street project |
![]() |
![]() |
![]() |
#12 |
Registered Mail
Join Date: Jun 2006
Location: Alberta, Canada
Posts: 513
|
Re: Build: I've never done bodywork...but I can change if I have to! (bagged '67 SWB
Well I gone and did it! ... got married this last weekend, honeymoon isn't for a few weeks, so I can work on the build for a little bit now. looking forward to a married life, I can count the amount of times I cried in the past 15 years on two fingers and this was one of them, was just too much to have a new wife and new son all wraped up in that moment. a friend took this photo, clearly doesn't know how to use a camera, but will do untill proper ones are done.
Exciting stuff! doing some filler work and sanding, peeled off some etching primer, not sure how well that stuff is gonna work anyway. Got the cab all primed up, but still might need to do a little more touch ups and filler work, I'm not very good at it, but at some point I am gonna have to leave it as is and throw some colour on it in the next day or two. I tell ya, all the spots I welded are simple fill jobs needing very little, but the one the "expert" did is just crap, he warped the gas filler area, and I just cant get it right, just so many curves in that spot... I think that retired autobody guy was more like a forced retirement.
__________________
'67 chev 496, lwb to swb, bagged - pro street project |
![]() |
![]() |
![]() |
#13 |
Registered Mail
Join Date: Jun 2006
Location: Alberta, Canada
Posts: 513
|
Re: Build: I've never done bodywork...but I can change if I have to! (bagged '67 SWB
Well I threw some colour down today! hopefully gonna clear the cab tomorrow and then start thinking about putting it on the frame for good!
finally got the gas filler bodywork to a point I could accept it. I already can't wait to start putting the guts back into this cab!
__________________
'67 chev 496, lwb to swb, bagged - pro street project |
![]() |
![]() |
![]() |
#14 |
Registered User
![]() Join Date: Dec 2004
Location: Gypsum Kansas 67448
Posts: 1,681
|
Re: Build: I've never done bodywork...but I can change if I have to! (bagged '67 SWB
coming along nicely
__________________
21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343 |
![]() |
![]() |
![]() |
#15 |
67cheby
![]() Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
|
Re: Build: I've never done bodywork...but I can change if I have to! (bagged '67 SWB
Congrats on the beautiful wife and the paint ! I think that when guys like us with car addictions find women that can handle us and that we should feel very lucky ! Lol
Posted via Mobile Device |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Apr 2011
Location: .
Posts: 3,104
|
Re: Build: I've never done bodywork...but I can change if I have to! (bagged '67 SWB
Congrats on gettin married.
The cab looks great too. |
![]() |
![]() |
![]() |
#17 | |
Registered Mail
Join Date: Jun 2006
Location: Alberta, Canada
Posts: 513
|
Re: Build: I've never done bodywork...but I can change if I have to! (bagged '67 SWB
Thanks, winter is the only time I can actually work on it, so i gotta push hard till end of march.
Quote:
well had a major setback today.. I really was unsatisfied with my sanding abilitles (or lack of ability). the back of the cab was wayy too wavy, I was using a padded block and it did nothing for me. so now I have to strip it all down again. I think I'll leave part of the interior (inner roof and dash) but the exterior has to get taken down. I guess I just rushed it too much and should have taken a little more time to check thoroughly. Did a little more research and gonna give it another try painting it myself. this time I am gonna block the bajebers out of it!
__________________
'67 chev 496, lwb to swb, bagged - pro street project |
|
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: May 2007
Location: Southern, Saskatchewan
Posts: 640
|
Re: Build: I've never done bodywork...but I can change if I have to! (bagged '67 SWB
Congrats on getting married, beautiful wife. I'm doing research also for primer and paint as i'm still trying to get my panel dents perfect with bondo. If your panels are wavy using a padded in line air sander is usually because you need to pull sander on 45 degrees across the area then go back the opposite way 45 degrees, instead of just moving straight across the area, I'm no expert but that sands it perfectly flat with no waves. Also good luck tackling all the jobs yourself, I'm doing the same on my truck can be trying at times.
Posted via Mobile Device
__________________
Kerry My build thread. http://67-72chevytrucks.com/vboard/s....php?p=3657823 1971 Chev SWB with 68 nose, 6.2 diesel th350, and 3.73 rear gears 1988 Chev Extendacab 2010 Honda VT1300CS Sabre 2005 Buick Rendezvous wife's ride |
![]() |
![]() |
![]() |
#19 | |
Registered Mail
Join Date: Jun 2006
Location: Alberta, Canada
Posts: 513
|
Re: Build: I've never done bodywork...but I can change if I have to! (bagged '67 SWB
Quote:
__________________
'67 chev 496, lwb to swb, bagged - pro street project |
|
![]() |
![]() |
![]() |
#20 |
Registered Mail
Join Date: Jun 2006
Location: Alberta, Canada
Posts: 513
|
Re: Build: I've never done bodywork...but I can change if I have to! (bagged '67 SWB
well I spent another week, sanding the thing down again partially is some places and fully on the back of the cab, but I think I am going to give up on painting. I just can't get it right, this time I did the bodywork and priming perfect, sanded the primer down oh so smooth. but the colour is just so hard to work with, I ended up getting an "overspray" texture on half of my project (plus all the dust bits from doing it in my shop where I sanded it)
I am trying to find a way to fix this paint, but the only thing I am finding is to sand again and respray the colour again for the third time... not sure I wanna try that again, I might just take it in to get the base and clear done for me.. I can't simply just colour sand it and then clear it, as it has tons of pearls in it, so it would look botched I think?
__________________
'67 chev 496, lwb to swb, bagged - pro street project |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Jan 2008
Location: Lacombe, Alberta
Posts: 353
|
Re: Build: I've never done bodywork...but I can change if I have to! (bagged '67 SWB
Just went through your build. Nice job. I didn't do any of the body work on my truck. Now I feel like I missed out.
Keep up the good work. Posted via Mobile Device
__________________
1968 short box stepside. 2007 5.3L 4L60, tuned w/EFI Live 2005 Silverado bucket seats. Dominator 2600's all around. Porterbuilt tubular control arms. Magnaflow 3" dual exhaust. |
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Aug 2011
Location: Atlanta, GA
Posts: 1,523
|
Re: Build: I've never done bodywork...but I can change if I have to! (bagged '67 SWB
congrats on the nuptials. truck is coming along great!
__________________
Best Regards, Leon M. Instagram: @TheDirtyDianah
Bagged | 6.0L LS | T-56 (6-Speed Manual) | Turbo Burnout/Rolling Video: Chevy C10 Stepside 6.0L LSx & 6-Speed Manual |
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Aug 2008
Location: Red Deer ab canada
Posts: 1,250
|
Re: Build: I've never done bodywork...but I can change if I have to! (bagged '67 SWB
Where are you at? I'd offer some help if I could....
__________________
1972 factory 2 Wheel Drive Blazer-Sold 1972 K10 4X4-Sold 1971 Chevrolet Cheyenne/10-Sold 1970 Chevrolet C/10-Sold 1968 GMC 4X4-Project 1968 Chevrolet C/10 Pro Street 1970 GMC 3/4 Ton-Parts 1997 2WD 2DR Yukon-Sweet http://67-72chevytrucks.com/vboard/s...d.php?t=335664 |
![]() |
![]() |
![]() |
#24 |
Registered Mail
Join Date: Jun 2006
Location: Alberta, Canada
Posts: 513
|
Re: Build: I've never done bodywork...but I can change if I have to! (bagged '67 SWB
Thanks, i will keep that in mind, and I don't mind paying for good help either! I am just east of edmonton.
But I did manage to ask for some advice on the paint and body work section, got some good responses.. Also did a bit more reading about paint. I tell ya, I can sure respect a good paint job when I see one now! Actually I made some good progress today, I wet sanded my cab interior with 800, then final wiped/tack clothed and added 2 coats of base and cleared with 2 coats, dont have any photos yet as it just finished flashing! Haha, but it turned out pretty good! I did unfortunately get quite a few dust nibs, but i expected that for my interior as all those little nooks and crannies hide stuff. I decided to do my interior and exterior of cab seperately and am finding it is much easier to control the flashing of my base... I am using medium reducer and i am not kidding it flashes in 3.5mins! So when i was doing the whole cab at once, i was getting overspray effect by the time i got to a different side. Now I'll mask off the interior and do the outside of the cab. But now i have another problem... I used up all my paint for most of the project on my cab mistakes (turned it into expensive dust on the floor!) and my supplier of ALSA paint is out of stock! Anyone know of a dealer in alberta that sells this stuff, other then AMP in edmonton? I really dont want to wait three weeks. Also, do you think it would be safe to hit the clear with a light 2000 wetsand, eventhough i only have 2 coats, not the 3 needed normally. I just wanna get out a few of the dust nibs if possible. I plan on 3 coats and wetsand for the exterior. Posted via Mobile Device
__________________
'67 chev 496, lwb to swb, bagged - pro street project Last edited by smoknbarrels; 02-19-2013 at 03:10 AM. |
![]() |
![]() |
![]() |
#25 |
67cheby
![]() Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
|
Re: Build: I've never done bodywork...but I can change if I have to! (bagged '67 SWB
Keep it up, you will figure it out but if you dont there is nothing wrong with handing it over to the professionals either !
|
![]() |
![]() |
![]() |
Bookmarks |
|
|