GA 64-66 parts big windows - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bonehead · 08-10-2013, 06:56 AM

Quote:

Originally Posted by 1enick72

The bed sides are in pretty good shape. I see no holes or even rusty spots other than some surface rust. The passenger side has a 6" square with some filler on it that has cracked but I don't feel there was much of a dent and definitely no hole. One of them has a dent on the top rail. The bed is all disassembled and you could have as much or as little as you want.
I'm not headed to Charlotte but I can get some shipping quotes for you.

Yes, please check on shipping cost and how much for both bedsides?

1enick72 · 08-12-2013, 09:19 AM

Tail gate, outside is pretty straight but the inside is dented up

1enick72 · 08-12-2013, 09:29 AM

bed sides. The picture of the inside is the opposite of where the bondo is on the outside, there is no dent or hole, I'm still trying to figure out why it was there.

1enick72 · 08-12-2013, 09:34 AM

Quote:

Originally Posted by bonehead

What kind of shape are the bedsides in? how much for long bedsides? and how much shipped to 28227?

Maybe...If you are coming to the Charlotte speedway auto fest in September maybe we can meet somewhere, I am close to the track. I could pay for them and you could hold them until the show or.... lets talk.

I posted up some pictures for you for the bed. I got a quote from my freight broker and looks like shipping to you if you pick it up at the terminal would be $135.

bonehead · 08-12-2013, 12:26 PM

Quote:

Originally Posted by 1enick72

I posted up some pictures for you for the bed. I got a quote from my freight broker and looks like shipping to you if you pick it up at the terminal would be $135.

And how much do you want for the bedsides?

slick willie · 08-16-2013, 11:11 AM

Do you have the rear bumper brackets. for the fleetside?

**LostMy65** · 08-16-2013, 12:02 PM

Do you have the emergency brake cable system for the 66?
Posted via Mobile Device

64ScrubnTub · 08-18-2013, 11:15 PM

Do you still have the tail gate, and if so how much, i'm local, thanks

64ScrubnTub · 08-19-2013, 08:57 PM

Do you have the frt. bed panel as well and how much if so, thanks again?

westcoast5 · 08-21-2013, 03:23 AM

do you still have the vent controls?

1enick72 · 08-22-2013, 01:06 PM

Bed is sold with tail gate and header panel. I tried to update yesterday but it kept saying add 2 more characters.

Quote:

Originally Posted by 64ScrubnTub

Do you have the frt. bed panel as well and how much if so, thanks again?

1enick72 · 08-22-2013, 01:07 PM

I'll check, mean the ones on the floor correct?

Quote:

Originally Posted by westcoast5

do you still have the vent controls?

riot936 · 08-31-2013, 07:54 PM

Dou have the upper panel that eztends from the core support towards the radiator?
Posted via Mobile Device

**pimpston65** · 09-01-2013, 04:43 AM

im looking for front and rear bumper with brace/brackets for a 65 c10 stepside any leads?

lowlife4life · 10-12-2013, 01:37 AM

How much for BBw section with shipping to grande prairie albertA can

westcoast5 · 10-20-2013, 03:58 AM

Quote:

Originally Posted by 1enick72

I'll check, mean the ones on the floor correct?

no the 3 lever deluex heater controls

dfusision001 · 10-28-2013, 12:49 AM

How much for the Sail Cab panels? are those still avail?

82ccshorty · 11-01-2013, 08:35 PM

How much for bbw section shipped to Charlotte nc 28214

Mistercates · 11-04-2013, 12:33 PM

Do you still have the hoods? And if so what would be the prices if I picked one up?

Thanks

white 450 · 11-05-2013, 05:01 PM

I would be interested in a hood for pick up as well if you still have them.

speed9895 · 11-16-2013, 03:14 PM

Im needing for a 1963 chevy c10 hood, raditor support, inner fenders , grille housing? Pics of them if you can and a pricing as im located in Nashville, Tn and will have to come to you thanks

1enick72 · 11-18-2013, 11:44 AM

Quote:

Originally Posted by dfusision001

How much for the Sail Cab panels? are those still avail?

Sorry they are gone

csa daddy · 12-02-2013, 07:13 PM

Do you still have a big window panel an possibly glass still for sale an how much to ship to 24550 va or grey hound to Lynchburg va

lenguini · 01-01-2014, 11:53 PM

Interested in both Custom cab mouldings(trim),please post some good pics if you still have them.

Thank you

08-12-2013, 09:19 AM	#77
1enick72 Registered User Join Date: Jun 2010 Location: Jackson, ME Posts: 287	Re: 64-66 parts big windows Tail gate, outside is pretty straight but the inside is dented up __________________ 65 short step edited by staff

08-12-2013, 09:29 AM	#78
1enick72 Registered User Join Date: Jun 2010 Location: Jackson, ME Posts: 287	Re: 64-66 parts big windows bed sides. The picture of the inside is the opposite of where the bondo is on the outside, there is no dent or hole, I'm still trying to figure out why it was there. __________________ 65 short step edited by staff

08-16-2013, 11:11 AM	#81
slick willie Registered User Join Date: Nov 2012 Location: San Antonio, Texas Posts: 10	Re: 64-66 parts big windows Do you have the rear bumper brackets. for the fleetside?

08-16-2013, 12:02 PM	#82
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,507	Re: 64-66 parts big windows Do you have the emergency brake cable system for the 66? Posted via Mobile Device __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

08-18-2013, 11:15 PM	#83
64ScrubnTub Registered User Join Date: Jan 2012 Location: Henry Co, Ga. Posts: 7	Re: 64-66 parts big windows Do you still have the tail gate, and if so how much, i'm local, thanks

08-19-2013, 08:57 PM	#84
64ScrubnTub Registered User Join Date: Jan 2012 Location: Henry Co, Ga. Posts: 7	Re: 64-66 parts big windows Do you have the frt. bed panel as well and how much if so, thanks again?

08-21-2013, 03:23 AM	#85
westcoast5 Registered User Join Date: Jul 2012 Location: salinas,ca Posts: 296	Re: 64-66 parts big windows do you still have the vent controls? __________________ *Bryan* 1966 SWB BBW "SICKT6" Accuair\|Porterbuilt\|Bodied\|Shaved\|Z'd\|350 with minor goodies\|5 lug\|front disc\|3.73 rear\|CPP power steering/brakes\|few more goodies\| thanks to C10Clubapparel

08-31-2013, 07:54 PM	#88
riot936 Registered User Join Date: Aug 2013 Location: huntsville tx Posts: 67	Re: 64-66 parts big windows Dou have the upper panel that eztends from the core support towards the radiator? Posted via Mobile Device

09-01-2013, 04:43 AM	#89
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,189	Re: 64-66 parts big windows im looking for front and rear bumper with brace/brackets for a 65 c10 stepside any leads?

10-12-2013, 01:37 AM	#90
lowlife4life Registered User Join Date: Jul 2013 Location: grande prairie alberta Posts: 324	Re: 64-66 parts big windows How much for BBw section with shipping to grande prairie albertA can

10-28-2013, 12:49 AM	#92
dfusision001 Registered User Join Date: Feb 2012 Location: FL Posts: 52	Re: 64-66 parts big windows How much for the Sail Cab panels? are those still avail?

11-01-2013, 08:35 PM	#93
82ccshorty Registered User Join Date: Jun 2012 Location: charlotte, north carolina Posts: 950	Re: 64-66 parts big windows How much for bbw section shipped to Charlotte nc 28214 __________________ 1969 chevy camaro Z28 #matchin Factory 4wheel disc 1969 chevy cst10 big block overdrive 5/7 drop dog dishs 1997 gmc yukon 2 door 2 wheel drive project 4/5.5 22s 2004 gmc sierra dually 4/4 lowering daily driver

11-04-2013, 12:33 PM	#94
Mistercates Registered User Join Date: Nov 2013 Location: chickamauga ga Posts: 5	Re: 64-66 parts big windows Do you still have the hoods? And if so what would be the prices if I picked one up? Thanks

11-05-2013, 05:01 PM	#95
white 450 Registered User Join Date: Sep 2013 Location: nashville tn Posts: 4	Re: 64-66 parts big windows I would be interested in a hood for pick up as well if you still have them.

11-16-2013, 03:14 PM	#96
speed9895 Registered User Join Date: May 2009 Location: Mt. Juliet, tn Posts: 6	Re: 64-66 parts big windows Im needing for a 1963 chevy c10 hood, raditor support, inner fenders , grille housing? Pics of them if you can and a pricing as im located in Nashville, Tn and will have to come to you thanks



Register or Log In To remove these advertisements.

12-02-2013, 07:13 PM	#98
csa daddy Registered User Join Date: May 2005 Location: evington,va Posts: 1,200	Re: 64-66 parts big windows Do you still have a big window panel an possibly glass still for sale an how much to ship to 24550 va or grey hound to Lynchburg va

01-01-2014, 11:53 PM	#99
lenguini Registered User Join Date: Oct 2010 Location: Kelowna B.C. Posts: 743	Re: 64-66 parts big windows Interested in both Custom cab mouldings(trim),please post some good pics if you still have them. Thank you __________________ Always a place in my heart for old Chevy trucks: My build thread-project truck dream 65" http://67-72chevytrucks.com/vboard/s...d.php?t=510863

Register or Log In To remove these advertisements.