TX Parting These Three Trucks

[missinfishin10]

Paypal Payment sent for Sway Bar and Brackets Greg, shipping next week is fine.

Thanks!

Jeff

[gmc 2500 4x4]

i will pass on the harnesses, but still want core support and grill pm me when you have time and when your all set with things and give me a total. i'm not in a hurry>>thanx, paul
forgot to ask, i need a complete jack setup if ya have somthing, and is the gmc tailgate still avail? doesnt have to be '67

[68 Four on the Floor]

Anyone claim the bit of trim on the left side of the GMC cab?

[chewychevy67]

Originally Posted by lynnfield

chewychevy67, the drums are junk..........BAAAAAD. The brake hardware, backing plates and other parts are good. The pulley on the P/S pump from the pic is bent, I have another if that's ok. Let me know what you want to do. Greg

sending PM

[stealthy '69]

Can I get a price on the 4 bolts that mount the fan shroud. The 2 circled in the pic and the 2 lowers also. Shipped to 68134. Thanks

[REEDS 72]

Hi hey pass side door on red&white 72 more pics price and shipping to 84003 pics inside and out thanks

[bollybib]

Interested in the upper AC compressor bracket only (in Post #9 4th pic). Thanks.

[lynnfield]

Hey everyone, just got back inside, it's raining here. I'm gonna grab some dinner, sit down with the wife for a little bit, and I'll be back with ya. Thanks, Greg

[nightmare]

is the '67 a longbed? what about the '70? also, is the '70 leafs or coils? i'm interested in the frames (price on them), longbed with leafs

[Horsman]

Needing a factory Q-jet throttle return spring(s)...I think I see one on the brown truck. Also need correct top long screw that holds the driver side ball vent register. Thanks!

Please let me know with shipping to Texas 75088. I can Paypal.

[WETOWM]

Greg, the transmission detent cable i am needing pictures it also on the brown truck thanks

[clb1024]

How are the leaf springs on the GMC? If they are good price and shipping to 32068? How is the gauge cluster? Price and shipping?

[too much stuff]

Originally Posted by lynnfield

Toomuchstuff, Pics of the seatbelts and rearview mirror. Retractors are ok, one buckle is good, the other is crusty and needed some WD40 to get it to open, one sleeve is missing. Mirror is hazy, bracket is good. $55 shipped for it all.

That will work, can i get the bolts for the seat belts also? Paypal?

[Kent63]

Greg,

I don't think I've seen anyone ask about the windshields. Any that have the SS trim included that are worth having? I'm interested in front and back glass that would fit a 70 C20.

Kent

[midniteblues]

I'm intrested in some green defroster vents I couldnt see them in any pics.If they are in good condition could I have a pic also price an shipping too 19559

[lynnfield]

Flchevygrl, I found a part number on the on the intake, here is a link to it on summit: http://www.summitracing.com/parts/EDL-3701/

These are the part numbers I found on the carbs I have

On the 72' 7037218BD, 0071
On the 70' 7040511QT, 3389
17054927, 3486
7029202DH, 0570

[lynnfield]

Deezilboy, I couldn't find one of those springs on either truck, sorry

[lynnfield]

danny6892002, the grille on the 70' is in bad shape, here is some pics of the door trim. Uppers are ok, lowers are faded on the woodgrain

[lynnfield]

BigRed76, I can get the one off the brown truck and check it out. I'll get back to you when it comes off. Yes, the steering wheel is black and it has cracks. Not the worst I've seen, $30 I'll get pics up.

71blksuper4x4, Trevor, sending PM with payment info

Brand7734, got you in line for the other sway bar

gmc 2500 4x4, Paul, thanks I may need some time to track down a suitable box. I'll check on the jack, and I don't have a GMC tailgate right now, sorry.

68 Four on the Floor, It's yours if you want it, $15 to your door. I have another piece that was inside the cab if you are interested. A door maybe........I think.

stealthy '69, usually they are bolted at the top and have clips at the bottom $12 shipped for everything. I can get a pic if you need.

REEDS 72, the doors on that truck are bad rusty.

bollybib, top A/C bracket, $16 shipped.

[lynnfield]

nightmare, $200 on the frame. 67' GMC has leafs, the 70' is coils. The GMC frame has a bad cross member, the very front one. I can include a good one from another frame. If that's not ok, I think I have another leaf spring truck here, but it will be a while before I get to it. Are you wanting more that one? I'd do $300 if you want two.

Horsman, I can double check that stuff and get back with you tomorrow

WETOWM, sorry I got confused. Did you see the second pic I posted for you? That's the one $18 shipped

clb1024, The leafs look to be in decent shape, they don't look flat. With the bed gone I'm not sure of an accurate way to really check them. The cluster in the GMC is in rough shape, the on in the 72' is good. $48 shipped on the 72' cluster. If you want the leafs, let me see if they go with the frame or not (member nightmare).

Toomuchstuff, Eric, that's fine. The one loose belt (crusty one) is missing the bolt, and it's the same one missing the sleeve. I'll PM payment info.

[lynnfield]

Kent63, the 72' has decent trim, it's the shallow channel on the windshield, and the rear is not a problem. Unless you want to pick it up, that stuff usually doesn't ship well. Might try Randy (teeitup), I bet he can help you and he's in your neck of the woods. If not let me know

midniteblues, I have some dark olive ones here........somewhere....Or are you needing the light green color?

[ZOOKEENEY]

Put me in line for the support in case something should happen. Thanks....
Posted via Mobile Device

[deezilboy]

Thanks for taking your time to look.

[WETOWM]

i will take the detent cable with orange end let know about payment thanks rich

[nightmare]

Originally Posted by lynnfield

nightmare, $200 on the frame. 67' GMC has leafs, the 70' is coils. The GMC frame has a bad cross member, the very front one. I can include a good one from another frame. If that's not ok, I think I have another leaf spring truck here, but it will be a while before I get to it. Are you wanting more that one? I'd do $300 if you want two.

Just one would be fine. From looking at the pics of the ’67, the front crossmember looks like it was pulled out, rather than just the rivets being cut off. Can you get better pics of that area? Also, does the ’67 have the provisions for the power steering box? (dent in the frame like ’69-’72). Can you also check to see if the other one that you have is a leaf spring truck? I don’t mind waiting if it’s a better specimen. Thanks