Palf's Little Blue Jimmy - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smbrouss70 · 10-28-2018, 08:35 PM

Glad you and Jan came Bill! I had a great time!

Grizz1963 · 01-12-2019, 04:36 AM

Happy Birthday Bill

Here’s to a great year.

Thanks for your forum input everywhere

**Palf70Step** · 01-12-2019, 09:57 AM

Quote:

Originally Posted by Grizz1963

Happy Birthday Bill

Here’s to a great year.

Thanks for your forum input everywhere

Thank you Grizz, haul'n some recycling, then looking at some car parts to start the day

Grizz1963 · 01-16-2019, 02:29 AM

.

Progress?

We are all watching.

Whamo · 01-16-2019, 08:12 AM

While I am late, I see that Happy Birthday is in order!

LT7A · 10-29-2018, 06:58 AM

You have been getting some good travel and use of the rig. That Offy intake is cool!

MrFinland · 10-29-2018, 03:33 PM

You have nice Truck Bill. By the way, you have also nice "license plate"!

**Palf70Step** · 11-12-2018, 05:51 PM

While I had some downtime, I decided to get to the electrical (again). Pulled out the dash and started the setup on the replacement gauge cluster. Cleaned the gauge bucket up, painted the inside and the back of the front panel gloss white. I also added some LEDs to replace the stock bulbs. Fixed a few issues with the circuit board, found a bad splice joint on the power feed from the fuse box to the gauges and a bad headlight switch. I also had to readjust the ignition switch position so when it is off it isn't supplying ACC power to the ign leads.

While I was working on the cluster I decided to move the stereo to the stock location since it was already behind my radio delete panel. I did tweak the position some and trimmed the bezel so I could remove the bezel without having to pull the stereo.

Everything is back in place and seems to work. I need to replace the oil pressure sensor and I think the gauge will respond right.

Man, finding broke grounds and power leads took me a week, but things seem to be good again. Clean her up tomorrow, and back to driving it some more.

OutlawDrifter · 11-12-2018, 09:14 PM

Nice work Bill, looks like a great improvement!

Greenlee · 11-13-2018, 12:51 AM

Nice work! Those LED bulbs make a huge difference. One of the best mods you can do to these trucks. I could barely see the gauges at night before.

Grizz1963 · 11-22-2018, 03:15 AM

Morning from my still warm bed here in England, Bill.

Been awake since stupid-0-clock, and reading threads I missed before or have not been on for a while.

My new to me 79 Blazer thread is almost up to date on here now too, last few days reporting updates to go. http://67-72chevytrucks.com/vboard/s...d.php?t=774451

But reading your thread, I am wanting a Square body stepper, but also realised that I may have to remove my carpets and refresh the rotted insulation and sound deadening.

I love the way you approach the Stepper. Bit by bit.

Lessons learned every day.

**Palf70Step** · 11-23-2018, 03:21 PM

Finally, I have all gauges working and dash functioning. I had to replace front turn signal/park lamp socket as it would noit ground the circuit. With that fixed this morning, I decided to replace the super faded side marker lenses also. Then it was drive time. Roaming around the bayous and all was nice and peaceful. So the 81 seems to be all together (for now), so now I have to troubleshoot/fix some heater and coolant issues on Whitey. It never ends

OutlawDrifter · 11-23-2018, 03:34 PM

It's always nice to get the "little things" done!

moregrip · 11-30-2018, 07:09 PM

that is one nice looking rig!

**Palf70Step** · 11-30-2018, 09:55 PM

Thank you guys. Been using it for a daily driver lately as my 02, Whitey, quit putting out heat and was leaking at water pump. I think I got Whitey all flushed out and parts replaced so the GMC can get his house back.

**Palf70Step** · 12-21-2018, 06:48 PM

Been working on other stuff and mostly just using this one as a daily driver. After spending the morning delivering several loads of Angel Tree gifts, I decided to add a bit of bling to the 81. For the GMC, they only reproduced the "M" of the original style grill letters. I kind of wanted folks to know it were not a Chebby. So I found some emblems off some newer SUVs. I picked up several, but I believe this one came off of the rear of one of the recent car style SUVs. Cleaned up the grill and I had some good 3M trim tape, so cut some up, aligned her up and now she show her lineage up front.

I am still debating on a aftermarket tube grill, but for now this should do.

BIGglaSS · 01-20-2019, 01:47 PM

Quote:

Originally Posted by Palf70Step

Been working on other stuff and mostly just using this one as a daily driver. After spending the morning delivering several loads of Angel Tree gifts, I decided to add a bit of bling to the 81. For the GMC, they only reproduced the "M" of the original style grill letters. I kind of wanted folks to know it were not a Chebby. So I found some emblems off some newer SUVs. I picked up several, but I believe this one came off of the rear of one of the recent car style SUVs. Cleaned up the grill and I had some good 3M trim tape, so cut some up, aligned her up and now she show her lineage up front.

I am still debating on a aftermarket tube grill, but for now this should do.

Yes! I need one of these. I've been casually checking the wrecking yards, but haven't found anything the right size. I'll keep looking. Your truck looks great. keep the stock grille.

LT7A · 02-01-2019, 10:22 AM

Quote:

Originally Posted by Palf70Step

Been working on other stuff and mostly just using this one as a daily driver. After spending the morning delivering several loads of Angel Tree gifts...

Cool to hear about your involvement with Angel Tree. I got to do a ride-along to deliver some angel tree gifts when I was in college. Something I'll never forget. It was in the Central District and one of the deliveries was to an African American (which I'm not) family of two boys whose dad was incarcerated. We knocked and the mother yelled for us to come in. As soon as we opened the door the youngest boy of about 4 ran across the room to me with his arms open. Even though we were bringing them wrapped Christmas gifts, he stayed in my arms until we left. Those of you who are fathers or surrogate fathers, try to never doubt the value and impact of your presence or embrace. Now back to trucks...

OutlawDrifter · 12-21-2018, 07:25 PM

That looks good Bill! Merry Christmas to you and yours!

Grizz1963 · 12-21-2018, 07:32 PM

Still in two minds about what badge to fit to my Blazer. Chevy or fake news GMC.

Your badge is actually real subtle Bill.

Works for me.

**Palf70Step** · 01-08-2019, 01:41 PM

I am guessing it did not like the run to Baton Rouge and back Saturday, as this happening today. Think the head-gasket is leaking/gone. Waiting for it to cool down and troubleshoot.

62 short step · 01-08-2019, 01:59 PM

Sorry to hear that Bill.

Good time for a motor swap!

Grizz1963 · 01-08-2019, 02:27 PM

Poop.

Not good.

Hope it’s minimal hassle.

smbrouss70 · 01-08-2019, 04:02 PM

https://www.jegs.com/i/Chevrolet-Per...622K4/10002/-1
It has almost as much torque as that straight 6!

62 short step · 01-08-2019, 04:39 PM

There ya go Bill!!

10-28-2018, 08:35 PM	#1
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,782	Re: Palf's 1981 GMC Glad you and Jan came Bill! I had a great time! __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

01-12-2019, 04:36 AM	#2
Grizz1963 Registered User Join Date: Dec 2012 Location: Rochester, KENT Posts: 10,492	Re: Palf's 1981 GMC Happy Birthday Bill Here’s to a great year. Thanks for your forum input everywhere __________________ MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE.

01-16-2019, 02:29 AM	#4
Grizz1963 Registered User Join Date: Dec 2012 Location: Rochester, KENT Posts: 10,492	Re: Palf's 1981 GMC . Progress? We are all watching. __________________ MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE.

01-16-2019, 08:12 AM	#5
Whamo Registered User Join Date: Mar 2014 Location: Nap Town, Indianapolis Posts: 233	Re: Palf's 1981 GMC While I am late, I see that Happy Birthday is in order! __________________ Just a Hillbilly in the Hood http://67-72chevytrucks.com/vboard/s...d.php?t=622194

10-29-2018, 06:58 AM	#6
LT7A Registered User Join Date: Oct 2015 Location: PNW Posts: 3,528	Re: Palf's 1981 GMC You have been getting some good travel and use of the rig. That Offy intake is cool!

10-29-2018, 03:33 PM	#7
MrFinland Registered User Join Date: Feb 2017 Location: Kokkola (Kälviä), FINLAND Posts: 348	Re: Palf's 1981 GMC You have nice Truck Bill. By the way, you have also nice "license plate"! __________________ Ilkka 1984 Silverado 6,2d http://67-72chevytrucks.com/vboard/s...d.php?t=731803 BMW 325i 1989 http://67-72chevytrucks.com/vboard/s...d.php?t=797823

11-12-2018, 05:51 PM	#8
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,725	Re: Palf's 1981 GMC While I had some downtime, I decided to get to the electrical (again). Pulled out the dash and started the setup on the replacement gauge cluster. Cleaned the gauge bucket up, painted the inside and the back of the front panel gloss white. I also added some LEDs to replace the stock bulbs. Fixed a few issues with the circuit board, found a bad splice joint on the power feed from the fuse box to the gauges and a bad headlight switch. I also had to readjust the ignition switch position so when it is off it isn't supplying ACC power to the ign leads. While I was working on the cluster I decided to move the stereo to the stock location since it was already behind my radio delete panel. I did tweak the position some and trimmed the bezel so I could remove the bezel without having to pull the stereo. Everything is back in place and seems to work. I need to replace the oil pressure sensor and I think the gauge will respond right. Man, finding broke grounds and power leads took me a week, but things seem to be good again. Clean her up tomorrow, and back to driving it some more. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-12-2018, 09:14 PM	#9
OutlawDrifter Registered User Join Date: Aug 2012 Location: Northeast KS Posts: 1,775	Re: Palf's 1981 GMC Nice work Bill, looks like a great improvement! __________________ 1999 GMC Suburban K2500 SLT, 454/4L80E 1991 Z/28, 6.0L/T56 1949 GMC 250, S10 Frame, 6.0L/4L80E Instagram @aceshighspeedshop

11-13-2018, 12:51 AM	#10
Greenlee Registered User Join Date: Jun 2004 Location: El Lago, TX Posts: 1,668	Re: Palf's 1981 GMC Nice work! Those LED bulbs make a huge difference. One of the best mods you can do to these trucks. I could barely see the gauges at night before.

11-22-2018, 03:15 AM	#11
Grizz1963 Registered User Join Date: Dec 2012 Location: Rochester, KENT Posts: 10,492	Re: Palf's 1981 GMC Morning from my still warm bed here in England, Bill. Been awake since stupid-0-clock, and reading threads I missed before or have not been on for a while. My new to me 79 Blazer thread is almost up to date on here now too, last few days reporting updates to go. http://67-72chevytrucks.com/vboard/s...d.php?t=774451 But reading your thread, I am wanting a Square body stepper, but also realised that I may have to remove my carpets and refresh the rotted insulation and sound deadening. I love the way you approach the Stepper. Bit by bit. Lessons learned every day. __________________ MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE.

11-23-2018, 03:21 PM	#12
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,725	Re: Palf's 1981 GMC Finally, I have all gauges working and dash functioning. I had to replace front turn signal/park lamp socket as it would noit ground the circuit. With that fixed this morning, I decided to replace the super faded side marker lenses also. Then it was drive time. Roaming around the bayous and all was nice and peaceful. So the 81 seems to be all together (for now), so now I have to troubleshoot/fix some heater and coolant issues on Whitey. It never ends Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-23-2018, 03:34 PM	#13
OutlawDrifter Registered User Join Date: Aug 2012 Location: Northeast KS Posts: 1,775	Re: Palf's 1981 GMC It's always nice to get the "little things" done! __________________ 1999 GMC Suburban K2500 SLT, 454/4L80E 1991 Z/28, 6.0L/T56 1949 GMC 250, S10 Frame, 6.0L/4L80E Instagram @aceshighspeedshop

11-30-2018, 07:09 PM	#14
moregrip Registered User Join Date: Dec 2008 Location: Las Vegas, NV Posts: 810	Re: Palf's 1981 GMC that is one nice looking rig! __________________ 1983 Chevy C10 250/3spd (current project truck) 1976 Chevy C10 350/350 Heavy Half (future project truck)

11-30-2018, 09:55 PM	#15
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,725	Re: Palf's 1981 GMC Thank you guys. Been using it for a daily driver lately as my 02, Whitey, quit putting out heat and was leaking at water pump. I think I got Whitey all flushed out and parts replaced so the GMC can get his house back. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

12-21-2018, 06:48 PM	#16
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,725	Re: Palf's 1981 GMC Been working on other stuff and mostly just using this one as a daily driver. After spending the morning delivering several loads of Angel Tree gifts, I decided to add a bit of bling to the 81. For the GMC, they only reproduced the "M" of the original style grill letters. I kind of wanted folks to know it were not a Chebby. So I found some emblems off some newer SUVs. I picked up several, but I believe this one came off of the rear of one of the recent car style SUVs. Cleaned up the grill and I had some good 3M trim tape, so cut some up, aligned her up and now she show her lineage up front. I am still debating on a aftermarket tube grill, but for now this should do. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!



Register or Log In To remove these advertisements.

12-21-2018, 07:25 PM	#19
OutlawDrifter Registered User Join Date: Aug 2012 Location: Northeast KS Posts: 1,775	Re: Palf's 1981 GMC That looks good Bill! Merry Christmas to you and yours! __________________ 1999 GMC Suburban K2500 SLT, 454/4L80E 1991 Z/28, 6.0L/T56 1949 GMC 250, S10 Frame, 6.0L/4L80E Instagram @aceshighspeedshop

12-21-2018, 07:32 PM	#20
Grizz1963 Registered User Join Date: Dec 2012 Location: Rochester, KENT Posts: 10,492	Re: Palf's 1981 GMC Still in two minds about what badge to fit to my Blazer. Chevy or fake news GMC. Your badge is actually real subtle Bill. Works for me. __________________ MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE.

01-08-2019, 01:41 PM	#21
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,725	Re: Palf's 1981 GMC I am guessing it did not like the run to Baton Rouge and back Saturday, as this happening today. Think the head-gasket is leaking/gone. Waiting for it to cool down and troubleshoot. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

01-08-2019, 01:59 PM	#22
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Palf's 1981 GMC Sorry to hear that Bill. Good time for a motor swap! __________________ www.louisianaclassictruckclub.com 1965 c-10 86 chevy c/k 20

01-08-2019, 02:27 PM	#23
Grizz1963 Registered User Join Date: Dec 2012 Location: Rochester, KENT Posts: 10,492	Re: Palf's 1981 GMC Poop. Not good. Hope it’s minimal hassle. __________________ MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE.

01-08-2019, 04:02 PM	#24
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,782	Re: Palf's 1981 GMC https://www.jegs.com/i/Chevrolet-Per...622K4/10002/-1 It has almost as much torque as that straight 6! Attached Images __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

01-08-2019, 04:39 PM	#25
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Palf's 1981 GMC There ya go Bill!! __________________ www.louisianaclassictruckclub.com 1965 c-10 86 chevy c/k 20

Register or Log In To remove these advertisements.