My 1968 C-20 Golden Anniversary Project - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ol Blue K20** · 07-05-2020, 10:12 AM

Your going to have a nice set of heads

**DeadheadNM** · 07-10-2020, 09:20 AM

German engineering - love it!

GerhardH · 07-13-2020, 04:36 AM

Width of valve seats are to big 0.125" = 3.175 mm That means:
VALVE SEAT JOB BY MACHINE SHOP
Heads are already there.

In the meantime two other side jobs:
Left door glas is shaking.
Railing is rusty.

GerhardH · 07-13-2020, 04:39 AM

:-)
White side covers produced by SMS Auto Fabrics.
Tool for removing the securing brackets door handle.

GerhardH · 07-13-2020, 04:42 AM

:-) Little bit rusty but below strong american steel. I'm happy.

Several paints and rost lockers are not allowed in Germany by law, therefore my favorite:

1. Owatrol oil (Rost stopper)
2. Brantho Korrux nitrofest (under coat)
3. Sealer Korroflex
4. Minimum 2 layers Brantho Korrux nitrofest
5. Alkydharzlack (Alkyd resin varnish)
6. Klarlack (clear varnish)

In the last picture Owatrol already done.

GerhardH · 07-15-2020, 04:38 PM

Next layer done.

cornerstone · 07-17-2020, 08:32 PM

Wow Gerhard! You've been working hard at it! Looks fantastic my friend.

**Ol Blue K20** · 07-21-2020, 01:30 PM

Looking good, don't forget to post a picture after paint.

GerhardH · 07-26-2020, 08:52 AM

Clear vanish added, paint preparation (taping) was not precise enough- that means time saved on the beginning and lost by factor 3 on the end, a lot of work. Will do more accurate next time.

For spray and first job the result looks good.

Color is 526 Ivory (also of-white and Cameo white)

GerhardH · 07-26-2020, 10:32 AM

Was starting to make some measurements on my motor, found out that I need a gauge with thread not rubber as it is not enough comfortable for me.
Spark plug #4 is oily, all others good bud maybe a little bit to lean (more white than brown color).
GAP is 0.035".
Compression between 11-13 bar, but measurment will be done again with different gauge (with thread).

cornerstone · 07-27-2020, 10:18 AM

The hard work of preparation has paid off. Congratulations on a job well done! The roof paint really looks great.

GerhardH · 07-27-2020, 11:21 AM

Some small issues during removing of the old hard tape, next time I will remove it in intermediate steps, but in general not bad for the first time.

**Ol Blue K20** · 07-27-2020, 11:35 AM

Looks good

fun in dirt · 07-27-2020, 04:53 PM

Hey Gerhard!!! Glad to see you getting some time to work on your truck after floating in the ocean for so long. Long live live old Chevys!

GerhardH · 07-28-2020, 10:53 AM

Yeaaaah and Chris Stapleton.

**Ol Blue K20** · 07-28-2020, 07:27 PM

Quote:

Originally Posted by GerhardH

Yeaaaah and Chris Stapleton.

You take it to the car wash?.....they would laugh at me if I did that to Blue. I did follow your lead. The spotlight is installed.

**Ol Blue K20** · 07-28-2020, 07:30 PM

One more pic.....ok two pics

GerhardH · 08-03-2020, 06:53 AM

Great man, looks perfect.

Regarding car wash is a fake
I washed by myself, but took a picture from a big truck wash advertisement.

**Ol Blue K20** · 08-03-2020, 08:56 AM

Quote:

Originally Posted by GerhardH

Great man, looks perfect.

Regarding car wash is a fake
I washed by myself, but took a picture from a big truck wash advertisement.

Ahhhhhh, I feel better now....

GerhardH · 08-14-2020, 07:28 AM

After weeks of waiting I got today the beezel from Brent- Thanks man, perfect quality. Its a honor to have the beezel for me!
See the pictures: 20 EUR add. customs fee and nearly paperless handling :-)

**breeh** · 08-14-2020, 05:58 PM

20 EUR for customs?! Wow!

**Ol Blue K20** · 08-14-2020, 06:48 PM

Nice!!!

GerhardH · 08-17-2020, 07:17 AM

Today arrived the air cleaner housing from classic industries. Not bad for a replica, I guess.

BLT gmc · 08-17-2020, 07:38 AM

The new cleaner looks very nice. Was the something wrong with the old one?

GerhardH · 08-17-2020, 10:27 AM

Quote:

Originally Posted by BLT gmc

The new cleaner looks very nice. Was the something wrong with the old one?

No but I would like to build an copy of my engine. Is just for fun and as living spare shelve. See #49 too.

07-05-2020, 10:12 AM	#1
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,882	Re: My 1968 C-20 Golden Anniversary Project Your going to have a nice set of heads __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

07-10-2020, 09:20 AM	#2
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,313	Re: My 1968 C-20 Golden Anniversary Project German engineering - love it! __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

07-13-2020, 04:36 AM	#3
GerhardH Registered User Join Date: Aug 2017 Location: South Germany Posts: 527	Re: My 1968 C-20 Golden Anniversary Project Width of valve seats are to big 0.125" = 3.175 mm That means: VALVE SEAT JOB BY MACHINE SHOP Heads are already there. In the meantime two other side jobs: Left door glas is shaking. Railing is rusty. Attached Images __________________ Best regards GerhardH! Members met: 68 short step, 68bowtie, 72c20customcamper, botmfedr1, C/10 King, Chevyland, cornerstore, dmjlambert, fun in dirt, GMan69, Ol Blue K20 1968 CHEVROLET C20 Custom Camper 50th Anniversary, Long bed (LB) 8', 327 V8, Air Condition (AC), Power Steering (PS), Power Brake (PB), Z62 Custom & Comfort Appearance, Turbo Hydramatic TH 400 http://67-72chevytrucks.com/vboard/s...d.php?t=760400 Last edited by GerhardH; 07-14-2020 at 03:56 AM.

07-13-2020, 04:42 AM	#5
GerhardH Registered User Join Date: Aug 2017 Location: South Germany Posts: 527	Re: My 1968 C-20 Golden Anniversary Project :-) Little bit rusty but below strong american steel. I'm happy. Several paints and rost lockers are not allowed in Germany by law, therefore my favorite: 1. Owatrol oil (Rost stopper) 2. Brantho Korrux nitrofest (under coat) 3. Sealer Korroflex 4. Minimum 2 layers Brantho Korrux nitrofest 5. Alkydharzlack (Alkyd resin varnish) 6. Klarlack (clear varnish) In the last picture Owatrol already done. Attached Images __________________ Best regards GerhardH! Members met: 68 short step, 68bowtie, 72c20customcamper, botmfedr1, C/10 King, Chevyland, cornerstore, dmjlambert, fun in dirt, GMan69, Ol Blue K20 1968 CHEVROLET C20 Custom Camper 50th Anniversary, Long bed (LB) 8', 327 V8, Air Condition (AC), Power Steering (PS), Power Brake (PB), Z62 Custom & Comfort Appearance, Turbo Hydramatic TH 400 http://67-72chevytrucks.com/vboard/s...d.php?t=760400 Last edited by GerhardH; 07-13-2020 at 04:55 AM.

07-15-2020, 04:38 PM	#6
GerhardH Registered User Join Date: Aug 2017 Location: South Germany Posts: 527	Re: My 1968 C-20 Golden Anniversary Project Next layer done. Attached Images __________________ Best regards GerhardH! Members met: 68 short step, 68bowtie, 72c20customcamper, botmfedr1, C/10 King, Chevyland, cornerstore, dmjlambert, fun in dirt, GMan69, Ol Blue K20 1968 CHEVROLET C20 Custom Camper 50th Anniversary, Long bed (LB) 8', 327 V8, Air Condition (AC), Power Steering (PS), Power Brake (PB), Z62 Custom & Comfort Appearance, Turbo Hydramatic TH 400 http://67-72chevytrucks.com/vboard/s...d.php?t=760400

07-13-2020, 04:39 AM	#4
GerhardH Registered User Join Date: Aug 2017 Location: South Germany Posts: 527	Re: My 1968 C-20 Golden Anniversary Project :-) White side covers produced by SMS Auto Fabrics. Tool for removing the securing brackets door handle. Attached Images __________________ Best regards GerhardH! Members met: 68 short step, 68bowtie, 72c20customcamper, botmfedr1, C/10 King, Chevyland, cornerstore, dmjlambert, fun in dirt, GMan69, Ol Blue K20 1968 CHEVROLET C20 Custom Camper 50th Anniversary, Long bed (LB) 8', 327 V8, Air Condition (AC), Power Steering (PS), Power Brake (PB), Z62 Custom & Comfort Appearance, Turbo Hydramatic TH 400 http://67-72chevytrucks.com/vboard/s...d.php?t=760400 Last edited by GerhardH; 07-13-2020 at 09:31 AM.

07-17-2020, 08:32 PM	#7
cornerstone Registered User Join Date: Apr 2014 Location: Azle,Texas Posts: 2,248	Re: My 1968 C-20 Golden Anniversary Project Wow Gerhard! You've been working hard at it! Looks fantastic my friend. __________________ Brian 1972 C10, "Loyd", LWB to SWB, 5.3, L83/6L80e, 4:11 Tru Trac, Air Ride, VA, DD, 20" Coys, 4 wheel disc, A quick LS swap turned into a 6 year frame off resto-mod.

07-21-2020, 01:30 PM	#8
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,882	Re: My 1968 C-20 Golden Anniversary Project Looking good, don't forget to post a picture after paint. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

07-26-2020, 08:52 AM	#9
GerhardH Registered User Join Date: Aug 2017 Location: South Germany Posts: 527	Re: My 1968 C-20 Golden Anniversary Project Clear vanish added, paint preparation (taping) was not precise enough- that means time saved on the beginning and lost by factor 3 on the end, a lot of work. Will do more accurate next time. For spray and first job the result looks good. Color is 526 Ivory (also of-white and Cameo white) Attached Images __________________ Best regards GerhardH! Members met: 68 short step, 68bowtie, 72c20customcamper, botmfedr1, C/10 King, Chevyland, cornerstore, dmjlambert, fun in dirt, GMan69, Ol Blue K20 1968 CHEVROLET C20 Custom Camper 50th Anniversary, Long bed (LB) 8', 327 V8, Air Condition (AC), Power Steering (PS), Power Brake (PB), Z62 Custom & Comfort Appearance, Turbo Hydramatic TH 400 http://67-72chevytrucks.com/vboard/s...d.php?t=760400 Last edited by GerhardH; 07-26-2020 at 08:57 AM.

07-26-2020, 10:32 AM	#10
GerhardH Registered User Join Date: Aug 2017 Location: South Germany Posts: 527	Re: My 1968 C-20 Golden Anniversary Project Was starting to make some measurements on my motor, found out that I need a gauge with thread not rubber as it is not enough comfortable for me. Spark plug #4 is oily, all others good bud maybe a little bit to lean (more white than brown color). GAP is 0.035". Compression between 11-13 bar, but measurment will be done again with different gauge (with thread). Attached Images __________________ Best regards GerhardH! Members met: 68 short step, 68bowtie, 72c20customcamper, botmfedr1, C/10 King, Chevyland, cornerstore, dmjlambert, fun in dirt, GMan69, Ol Blue K20 1968 CHEVROLET C20 Custom Camper 50th Anniversary, Long bed (LB) 8', 327 V8, Air Condition (AC), Power Steering (PS), Power Brake (PB), Z62 Custom & Comfort Appearance, Turbo Hydramatic TH 400 http://67-72chevytrucks.com/vboard/s...d.php?t=760400 Last edited by GerhardH; 07-26-2020 at 12:00 PM.

07-27-2020, 10:18 AM	#11
cornerstone Registered User Join Date: Apr 2014 Location: Azle,Texas Posts: 2,248	Re: My 1968 C-20 Golden Anniversary Project The hard work of preparation has paid off. Congratulations on a job well done! The roof paint really looks great. __________________ Brian 1972 C10, "Loyd", LWB to SWB, 5.3, L83/6L80e, 4:11 Tru Trac, Air Ride, VA, DD, 20" Coys, 4 wheel disc, A quick LS swap turned into a 6 year frame off resto-mod.

07-27-2020, 11:21 AM	#12
GerhardH Registered User Join Date: Aug 2017 Location: South Germany Posts: 527	Re: My 1968 C-20 Golden Anniversary Project Some small issues during removing of the old hard tape, next time I will remove it in intermediate steps, but in general not bad for the first time. Attached Images __________________ Best regards GerhardH! Members met: 68 short step, 68bowtie, 72c20customcamper, botmfedr1, C/10 King, Chevyland, cornerstore, dmjlambert, fun in dirt, GMan69, Ol Blue K20 1968 CHEVROLET C20 Custom Camper 50th Anniversary, Long bed (LB) 8', 327 V8, Air Condition (AC), Power Steering (PS), Power Brake (PB), Z62 Custom & Comfort Appearance, Turbo Hydramatic TH 400 http://67-72chevytrucks.com/vboard/s...d.php?t=760400 Last edited by GerhardH; 07-27-2020 at 12:12 PM.

07-27-2020, 11:35 AM	#13
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,882	Re: My 1968 C-20 Golden Anniversary Project Looks good __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

07-27-2020, 04:53 PM	#14
fun in dirt Registered User Join Date: Jan 2007 Location: Mississippi Posts: 2,118	Re: My 1968 C-20 Golden Anniversary Project Hey Gerhard!!! Glad to see you getting some time to work on your truck after floating in the ocean for so long. Long live live old Chevys! __________________ '72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432 '85 K30 "Big Nassy" '06 3500 Duramax ...tow truck '06 Silverado SS...DD '06 C1500 WT...DD '07 Classic C1500 WT...DD Built & sold cause can't keep 'em all: '72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190 '55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938 '69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541 '86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619

07-28-2020, 10:53 AM	#15
GerhardH Registered User Join Date: Aug 2017 Location: South Germany Posts: 527	Re: My 1968 C-20 Golden Anniversary Project Yeaaaah and Chris Stapleton. Attached Images __________________ Best regards GerhardH! Members met: 68 short step, 68bowtie, 72c20customcamper, botmfedr1, C/10 King, Chevyland, cornerstore, dmjlambert, fun in dirt, GMan69, Ol Blue K20 1968 CHEVROLET C20 Custom Camper 50th Anniversary, Long bed (LB) 8', 327 V8, Air Condition (AC), Power Steering (PS), Power Brake (PB), Z62 Custom & Comfort Appearance, Turbo Hydramatic TH 400 http://67-72chevytrucks.com/vboard/s...d.php?t=760400



Register or Log In To remove these advertisements.

07-28-2020, 07:30 PM	#17
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,882	Re: My 1968 C-20 Golden Anniversary Project One more pic.....ok two pics Attached Images __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

08-03-2020, 06:53 AM	#18
GerhardH Registered User Join Date: Aug 2017 Location: South Germany Posts: 527	Re: My 1968 C-20 Golden Anniversary Project Great man, looks perfect. Regarding car wash is a fake I washed by myself, but took a picture from a big truck wash advertisement. __________________ Best regards GerhardH! Members met: 68 short step, 68bowtie, 72c20customcamper, botmfedr1, C/10 King, Chevyland, cornerstore, dmjlambert, fun in dirt, GMan69, Ol Blue K20 1968 CHEVROLET C20 Custom Camper 50th Anniversary, Long bed (LB) 8', 327 V8, Air Condition (AC), Power Steering (PS), Power Brake (PB), Z62 Custom & Comfort Appearance, Turbo Hydramatic TH 400 http://67-72chevytrucks.com/vboard/s...d.php?t=760400

08-14-2020, 07:28 AM	#20
GerhardH Registered User Join Date: Aug 2017 Location: South Germany Posts: 527	Re: My 1968 C-20 Golden Anniversary Project After weeks of waiting I got today the beezel from Brent- Thanks man, perfect quality. Its a honor to have the beezel for me! See the pictures: 20 EUR add. customs fee and nearly paperless handling :-) Attached Images __________________ Best regards GerhardH! Members met: 68 short step, 68bowtie, 72c20customcamper, botmfedr1, C/10 King, Chevyland, cornerstore, dmjlambert, fun in dirt, GMan69, Ol Blue K20 1968 CHEVROLET C20 Custom Camper 50th Anniversary, Long bed (LB) 8', 327 V8, Air Condition (AC), Power Steering (PS), Power Brake (PB), Z62 Custom & Comfort Appearance, Turbo Hydramatic TH 400 http://67-72chevytrucks.com/vboard/s...d.php?t=760400

08-14-2020, 05:58 PM	#21
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Re: My 1968 C-20 Golden Anniversary Project 20 EUR for customs?! Wow! __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

08-14-2020, 06:48 PM	#22
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,882	Re: My 1968 C-20 Golden Anniversary Project Nice!!! __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

08-17-2020, 07:17 AM	#23
GerhardH Registered User Join Date: Aug 2017 Location: South Germany Posts: 527	Re: My 1968 C-20 Golden Anniversary Project Today arrived the air cleaner housing from classic industries. Not bad for a replica, I guess. Attached Images __________________ Best regards GerhardH! Members met: 68 short step, 68bowtie, 72c20customcamper, botmfedr1, C/10 King, Chevyland, cornerstore, dmjlambert, fun in dirt, GMan69, Ol Blue K20 1968 CHEVROLET C20 Custom Camper 50th Anniversary, Long bed (LB) 8', 327 V8, Air Condition (AC), Power Steering (PS), Power Brake (PB), Z62 Custom & Comfort Appearance, Turbo Hydramatic TH 400 http://67-72chevytrucks.com/vboard/s...d.php?t=760400 Last edited by GerhardH; 08-17-2020 at 07:22 AM.

08-17-2020, 07:38 AM	#24
BLT gmc Registered User Join Date: Feb 2014 Location: West Iowa Posts: 1,107	Re: My 1968 C-20 Golden Anniversary Project The new cleaner looks very nice. Was the something wrong with the old one?

Register or Log In To remove these advertisements.