71' C10 Cheyenne Super Build - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 10-12-2011, 12:30 AM

Very nice!

xludan · 10-14-2011, 09:32 AM

Started hooking up the Ez EFI system today. I should have the cab back on the frame by this weekend so I can start routing fuel lines where I want them.

xludan · 10-17-2011, 09:47 AM

Worked on the bed a little this weekend. Wasn't too bad except for some rust in where the fenderwell attaches to the bed. Nothing that can't be fixed.

VA72C10 · 10-17-2011, 01:56 PM

Not bad at all! Bed looks to be in good shape!

xludan · 10-31-2011, 09:17 AM

Patched up the bed this weekend. Still need to dress the welds but that should be the last of the rust repair!

VA72C10 · 10-31-2011, 12:52 PM

Nice work!

**Dieselwrencher** · 10-31-2011, 07:46 PM

Looking great! Keep at it.

xludan · 11-03-2011, 06:15 PM

Dressed the welds and sprayed some raptor liner on the bottom of the bed. I didnt spray the parts that mount on the frame because I didnt want to throw off the cab to bed alignment. I know its probably minimal and im being overcautious but it makes me feel better

Posted via Mobile Device

LakeAnna · 11-03-2011, 07:42 PM

great looking work throughout! What type of coating is the Raptor product? I like that finish and will be needing to do the same mess to mine soon.

VA72C10 · 11-03-2011, 08:22 PM

Looks good! Are you going to spray something on the areas where it hits the frame (rust converter or paint?)

xludan · 11-04-2011, 12:12 AM

Quote:

Originally Posted by LakeAnna

great looking work throughout! What type of coating is the Raptor product? I like that finish and will be needing to do the same mess to mine soon.

Yeah the raptor liner is a 2 part system. You just mix in the catalyst, shake really well, and spray. It sprayed really easy and is pretty user friendly. It feels more like a hard plastic and not so rubbery like other undercoatings. You can get a whole kit for about $110 including the gun to spray it. See the link below:

http://www.tptools.com/p/2600,233_U-...Liner-Kit.html

**Dieselwrencher** · 11-04-2011, 03:57 PM

Man that turned out great!

xludan · 11-12-2011, 09:53 PM

First off....mini celebration for my 100th post woohoo!

I put in the new fuel lines today for the EFI system. I ran braided line from the tank to the frame rail and hard lines all the way up the frame rail. This was my first shot at ever making fuel lines and I think it turned out pretty good. I used 3/8" hardline and -6 braided line.

My first attempt at braided line and AN fittings ever. Pretty snazzy!

The finished braided lines:

Hard line/braided line connection at the frame rail

Hard line

LakeAnna · 11-13-2011, 05:28 AM

Nice looking work!

RCbowtie69 · 11-20-2011, 08:58 PM

Just checking up your progress & it's looking like some progress has been made.Keep the pictures coming & keep on truckin'

xludan · 12-13-2011, 07:45 PM

My new seat cover came today

Posted via Mobile Device

**Dieselwrencher** · 12-13-2011, 08:17 PM

Nice seat cover and great work on the fuel lines!

Zoomin · 12-13-2011, 11:04 PM

Quote:

Originally Posted by Dieselwrencher

Nice seat cover and great work on the fuel lines!

X2!

I'm partial to parchment too. Gonna look great!

I've never messed with AN fittings. How difficult was it to fit those?
Posted via Mobile Device

mrein3 · 12-21-2011, 10:22 AM

I keep waiting to see that seat done. Any progress?

xludan · 12-21-2011, 12:37 PM

Quote:

Originally Posted by mrein3

I keep waiting to see that seat done. Any progress?

Well I dropped the seat off at the upholstery shop on Monday and it should be done by this Friday. Unfortunately I broke my foot last night playing basketball so progress will probably be slow.

xludan · 12-21-2011, 05:37 PM

Picked up the seat today. Upholsterer did a really good job. He fixed the foa

m, repaired all broken springs and painted the frame as well.

Old busted seat:

New Hotness:

Unfortunately I broke my foot at a basketball game last night and progress will be slow for a few weeks

Posted via Mobile Device

VA72C10 · 12-21-2011, 06:56 PM

Ouch! Hope you heal soon!

On a good note...the seat looks AWESOME!

mrein3 · 12-23-2011, 11:51 AM

Thats gotta hurt. I guess without basketball you'll have more time to spend working on the truck. Eh?

RCbowtie69 · 12-27-2011, 10:15 AM

Ouch!!! hope you get well soon,your seat looks good & keep on truckin'

**FRENCHBLUE72** · 12-27-2011, 12:41 PM

jUST CHECKED OUT YOUR BUILD AND FIGURED i LET YA KNOW YOUR DOING A GREAT JOB.. Hope that foot getts better soon.

10-12-2011, 12:30 AM	#76
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 71' C10 Cheyenne Super Build Very nice! __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-14-2011, 09:32 AM	#77
xludan Registered User Join Date: Jan 2010 Location: Minneapolis MN Posts: 202	Re: 71' C10 Cheyenne Super Build Started hooking up the Ez EFI system today. I should have the cab back on the frame by this weekend so I can start routing fuel lines where I want them. __________________ 1971 C10 Cheyenne Super Build Thread Here: http://67-72chevytrucks.com/vboard/s...d.php?t=411867

10-17-2011, 09:47 AM	#78
xludan Registered User Join Date: Jan 2010 Location: Minneapolis MN Posts: 202	Re: 71' C10 Cheyenne Super Build Worked on the bed a little this weekend. Wasn't too bad except for some rust in where the fenderwell attaches to the bed. Nothing that can't be fixed. __________________ 1971 C10 Cheyenne Super Build Thread Here: http://67-72chevytrucks.com/vboard/s...d.php?t=411867

10-17-2011, 01:56 PM	#79
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 71' C10 Cheyenne Super Build Not bad at all! Bed looks to be in good shape! __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-31-2011, 09:17 AM	#80
xludan Registered User Join Date: Jan 2010 Location: Minneapolis MN Posts: 202	Re: 71' C10 Cheyenne Super Build Patched up the bed this weekend. Still need to dress the welds but that should be the last of the rust repair! __________________ 1971 C10 Cheyenne Super Build Thread Here: http://67-72chevytrucks.com/vboard/s...d.php?t=411867

10-31-2011, 12:52 PM	#81
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 71' C10 Cheyenne Super Build Nice work! __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-31-2011, 07:46 PM	#82
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,141	Re: 71' C10 Cheyenne Super Build Looking great! Keep at it. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-03-2011, 06:15 PM	#83
xludan Registered User Join Date: Jan 2010 Location: Minneapolis MN Posts: 202	Re: 71' C10 Cheyenne Super Build Dressed the welds and sprayed some raptor liner on the bottom of the bed. I didnt spray the parts that mount on the frame because I didnt want to throw off the cab to bed alignment. I know its probably minimal and im being overcautious but it makes me feel better Posted via Mobile Device __________________ 1971 C10 Cheyenne Super Build Thread Here: http://67-72chevytrucks.com/vboard/s...d.php?t=411867

11-03-2011, 07:42 PM	#84
LakeAnna Registered User Join Date: Oct 2011 Location: Virginia Posts: 599	Re: 71' C10 Cheyenne Super Build great looking work throughout! What type of coating is the Raptor product? I like that finish and will be needing to do the same mess to mine soon. __________________ Chris *72 RESTO* http://67-72chevytrucks.com/vboard/s...d.php?t=501870

11-03-2011, 08:22 PM	#85
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 71' C10 Cheyenne Super Build Looks good! Are you going to spray something on the areas where it hits the frame (rust converter or paint?) __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-04-2011, 03:57 PM	#87
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,141	Re: 71' C10 Cheyenne Super Build Man that turned out great! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-12-2011, 09:53 PM	#88
xludan Registered User Join Date: Jan 2010 Location: Minneapolis MN Posts: 202	Re: 71' C10 Cheyenne Super Build First off....mini celebration for my 100th post woohoo! I put in the new fuel lines today for the EFI system. I ran braided line from the tank to the frame rail and hard lines all the way up the frame rail. This was my first shot at ever making fuel lines and I think it turned out pretty good. I used 3/8" hardline and -6 braided line. My first attempt at braided line and AN fittings ever. Pretty snazzy! The finished braided lines: Hard line/braided line connection at the frame rail Hard line __________________ 1971 C10 Cheyenne Super Build Thread Here: http://67-72chevytrucks.com/vboard/s...d.php?t=411867

11-13-2011, 05:28 AM	#89
LakeAnna Registered User Join Date: Oct 2011 Location: Virginia Posts: 599	Re: 71' C10 Cheyenne Super Build Nice looking work! __________________ Chris *72 RESTO* http://67-72chevytrucks.com/vboard/s...d.php?t=501870

11-20-2011, 08:58 PM	#90
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: 71' C10 Cheyenne Super Build Just checking up your progress & it's looking like some progress has been made.Keep the pictures coming & keep on truckin' __________________ My Truck: 2.5 drop front, 4 & 5/8 in rear, 350cubic in. been bored .60 over, 700r4 (soon), 3 speed (on tree for now).rims & tires size,15x8 ralleys 5 on 5,P275/60R15. Members I have met: Pickupman, 1972 Super Cheyenne, Stepside,Chis Mc Bride. tsnow67,joel.e,

12-13-2011, 07:45 PM	#91
xludan Registered User Join Date: Jan 2010 Location: Minneapolis MN Posts: 202	Re: 71' C10 Cheyenne Super Build My new seat cover came today Posted via Mobile Device __________________ 1971 C10 Cheyenne Super Build Thread Here: http://67-72chevytrucks.com/vboard/s...d.php?t=411867



Register or Log In To remove these advertisements.

12-13-2011, 08:17 PM	#92
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,141	Re: 71' C10 Cheyenne Super Build Nice seat cover and great work on the fuel lines! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

12-21-2011, 10:22 AM	#94
mrein3 Registered User Join Date: Feb 2000 Location: Center City, MN, USA Posts: 3,253	Re: 71' C10 Cheyenne Super Build I keep waiting to see that seat done. Any progress? __________________ '70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN

12-21-2011, 05:37 PM	#96
xludan Registered User Join Date: Jan 2010 Location: Minneapolis MN Posts: 202	Re: 71' C10 Cheyenne Super Build Picked up the seat today. Upholsterer did a really good job. He fixed the foa m, repaired all broken springs and painted the frame as well. Old busted seat: New Hotness: Unfortunately I broke my foot at a basketball game last night and progress will be slow for a few weeks Posted via Mobile Device __________________ 1971 C10 Cheyenne Super Build Thread Here: http://67-72chevytrucks.com/vboard/s...d.php?t=411867

12-21-2011, 06:56 PM	#97
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 71' C10 Cheyenne Super Build Ouch! Hope you heal soon! On a good note...the seat looks AWESOME! __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-23-2011, 11:51 AM	#98
mrein3 Registered User Join Date: Feb 2000 Location: Center City, MN, USA Posts: 3,253	Re: 71' C10 Cheyenne Super Build Thats gotta hurt. I guess without basketball you'll have more time to spend working on the truck. Eh? __________________ '70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN

12-27-2011, 10:15 AM	#99
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: 71' C10 Cheyenne Super Build Ouch!!! hope you get well soon,your seat looks good & keep on truckin' __________________ My Truck: 2.5 drop front, 4 & 5/8 in rear, 350cubic in. been bored .60 over, 700r4 (soon), 3 speed (on tree for now).rims & tires size,15x8 ralleys 5 on 5,P275/60R15. Members I have met: Pickupman, 1972 Super Cheyenne, Stepside,Chis Mc Bride. tsnow67,joel.e,

12-27-2011, 12:41 PM	#100
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: 71' C10 Cheyenne Super Build jUST CHECKED OUT YOUR BUILD AND FIGURED i LET YA KNOW YOUR DOING A GREAT JOB.. Hope that foot getts better soon. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Register or Log In To remove these advertisements.