KS 71 Big block 402/tiurbo 400 GMC Sierra parting now - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 10-21-2010, 10:52 PM

Hey Bryan, last setup I had I got $150 plus shipping. Thanks Randy

hounddogs! · 10-21-2010, 11:00 PM

Damm, Randy. Not sure I'll let you do that. Lemme know when you schedule opens up some.

Loren

teeitup · 10-21-2010, 11:07 PM

Loren, if you want it all let me know I'd rather sell it complete, As you know I'm screwed up this weekend with Wedding on Sat and golf tourney Sun. I've got golf outings Mon and Wed afternoons/evenings. I'm available Tues, Thurs and Fri evenings, and I think Sat I think. Thanks Randy

BB72CHEVKT · 10-22-2010, 10:20 AM

I will take the woodgrain trim for $20 if still available.

Thanks,
Kevin

teeitup · 10-22-2010, 12:59 PM

Sorry they have been sold and shipped already. Thanks Randy

xman · 10-22-2010, 03:56 PM

would you by any chance still have any setups like this along with the steel
straps (not sure what you call them) that go from the bed side to the tailgate so the tailgate does not sag and hit the bumper. if so how much shipped to 60435

Thanks Dave

teeitup · 10-22-2010, 04:03 PM

I have the straps and trunions but do not have the gate handle or any of stuff inside gate. Thanks Randy

teeitup · 10-22-2010, 04:06 PM

pic for truckdude

**truckdude239** · 10-22-2010, 05:08 PM

looks good i will sent a paypal out

**truckdude239** · 10-23-2010, 07:11 AM

tee how much for ma 2wd fan should for a 71 chevy shiped to 27104?

teeitup · 10-23-2010, 11:07 AM

truckdude, I'll get your line out to you in mail Mon. Sorry I think I sold all my shrouds that I had, but i will look to make sure. Thanks Randy

**WIDESIDE72** · 10-23-2010, 12:20 PM

Hey Randy! Back again!

How much for each individually, and a package deal for all of it shipped to Lolita, Tx 77971? (Truck is at Dad's house now for him to finish.
jack and handle
steering column firewall bracket
fender to cowl seal brackets

You can see the build thread with a lot of your parts at http://67-72chevytrucks.com/vboard/s...d.php?t=388241

sakohntr · 10-23-2010, 05:57 PM

Randy, I would like the carb spacer and power brake booster hose with bracket. And the rear bumper if it isnt damaged or rusted out. NO shipping. I'll pick this up first week of Dec. And I can haul stuff north for ya if anyone needs it. thanks Bruce

teeitup · 10-24-2010, 09:05 PM

Steve, jack and handle $20, outer firewall column bracket free, fender cowl seals $10, plus shipping
Bruce, I'm out of town the first weekend of Dec but I can get Eric and your parts to you. Carb spacer is sold, BB booster hose $10, I have 2 if you want another? Bumper I'll check out, if good $20 for it
THANKS Randy

**HOTFUN** · 10-24-2010, 09:25 PM

Hi Randy
How good are the mirrors? Looks like the 73 up style but do they have the date code marking on the glass at the top center? Let me know shape and price. Thanks, Mark

**WIDESIDE72** · 10-25-2010, 10:57 AM

Quote:

Originally Posted by teeitup

Steve, jack and handle $20, outer firewall column bracket free, fender cowl seals $10, plus shipping
Bruce, I'm out of town the first weekend of Dec but I can get Eric and your parts to you. Carb spacer is sold, BB booster hose $10, I have 2 if you want another? Bumper I'll check out, if good $20 for it
THANKS Randy

I forgot to ask. Is the jack froze up, or is it functional? If it works, shoot me a shipping cost and I will paypal you for the parts above.

68C10HotRod · 10-25-2010, 08:06 PM

Quote:

Originally Posted by teeitup

Hey Bryan, last setup I had I got $150 plus shipping. Thanks Randy

You got too many threads going. I couldn't find this post.

I realize I'm past my 24hr limit anyway but wanted to lyk I'd pass on the PS parts for now. I just wanted to make a 454 install look a little more stock in the 68 but I can just use the pump that came on the motor.

Have any luck selling the motor complete or did I miss that?

teeitup · 10-26-2010, 08:33 AM

Sorry guys been gone alot the last 3 days, I'll answer questions tonight after work. Off to work now, Thanks Randy

newbraunie · 10-26-2010, 03:25 PM

How are the rims? Looking for a set of stock rims 16x8 8 lug. I know shipping may be a deal killer but thought I would ask.

teeitup · 10-26-2010, 05:53 PM

Hotfun, Mark, driver quality, I'll take them off and you can have them if you want them
Wideside72, Steve, jack is froze up. Let me know what your wanting for sure and I'll get a quote
68C10Hotrod, Bryan, no problem on PS setup. Its still for sale complete or in pieces, haven't sold anything except motor stands off it
Newbraunie, I have 2 16 inch rims is all right now
Thanks Randy

**HOTFUN** · 10-26-2010, 06:50 PM

Thanks Randy, I need to make that trip one of these days too for that cab. I'll take the mirrors and if you can save the pads and mounts that would be great. So you want to just hold them there with the cab or send them out sometime as i can paypal some money too. Thanks so much. Mark

newbraunie · 10-26-2010, 06:57 PM

Quote:

Originally Posted by teeitup

Hotfun, Mark, driver quality, I'll take them off and you can have them if you want them
Wideside72, Steve, jack is froze up. Let me know what your wanting for sure and I'll get a quote
68C10Hotrod, Bryan, no problem on PS setup. Its still for sale complete or in pieces, haven't sold anything except motor stands off it
Newbraunie, I have 2 16 inch rims is all right now
Thanks Randy

Are they 8" wide?. What condition? Looking to sandblast and powdercoat. How much $?

teeitup · 10-26-2010, 11:34 PM

Mark, no worries on money for mirrors, I can hold them for you. No worries on cab either, its at golf course out of the way. I still have my 72 swb 4x4, don't you need it?

newbraunie, I'm not sure how wide, they still have tires on them, I don't think they are 8's though. $25 each plus shipping
Thanks Randy

newbraunie · 10-27-2010, 11:13 AM

Quote:

Originally Posted by teeitup

Hotfun, Mark, driver quality, I'll take them off and you can have them if you want them
Wideside72, Steve, jack is froze up. Let me know what your wanting for sure and I'll get a quote
68C10Hotrod, Bryan, no problem on PS setup. Its still for sale complete or in pieces, haven't sold anything except motor stands off it
Newbraunie, I have 2 16 inch rims is all right now
Thanks Randy

If Wideside72 passes on jack I am interested in jack handle only. Let me know a bit more on condition of rims, any dings or bad rust? Interested even if 6" wide.

**WIDESIDE72** · 10-27-2010, 01:00 PM

I will pass on the jack and handle.

How much for all of it shipped to Lolita, Tx 77971
steering column firewall brackets/ bolts
fender to cowl seal brackets

10-21-2010, 10:52 PM	#76
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 Big block 402/tiurbo 400 GMC Sierra parting now Hey Bryan, last setup I had I got $150 plus shipping. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-21-2010, 11:00 PM	#77
hounddogs! Restoring it $200 at a time... Join Date: Aug 2008 Location: NE Kansas Posts: 886	Re: 71 Big block 402/tiurbo 400 GMC Sierra parting now Damm, Randy. Not sure I'll let you do that. Lemme know when you schedule opens up some. Loren __________________ Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0

10-21-2010, 11:07 PM	#78
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 Big block 402/tiurbo 400 GMC Sierra parting now Loren, if you want it all let me know I'd rather sell it complete, As you know I'm screwed up this weekend with Wedding on Sat and golf tourney Sun. I've got golf outings Mon and Wed afternoons/evenings. I'm available Tues, Thurs and Fri evenings, and I think Sat I think. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-22-2010, 10:20 AM	#79
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,948	Re: 71 Big block 402/tiurbo 400 GMC Sierra parting now I will take the woodgrain trim for $20 if still available. Thanks, Kevin __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400 Last edited by BB72CHEVKT; 10-22-2010 at 01:53 PM.

10-22-2010, 12:59 PM	#80
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 Big block 402/tiurbo 400 GMC Sierra parting now Sorry they have been sold and shipped already. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-22-2010, 03:56 PM	#81
xman Registered User Join Date: Mar 2009 Location: Channahon, IL Posts: 198	Re: 71 Big block 402/tiurbo 400 GMC Sierra parting now would you by any chance still have any setups like this along with the steel straps (not sure what you call them) that go from the bed side to the tailgate so the tailgate does not sag and hit the bumper. if so how much shipped to 60435 Thanks Dave Attached Images

10-22-2010, 04:03 PM	#82
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 Big block 402/tiurbo 400 GMC Sierra parting now I have the straps and trunions but do not have the gate handle or any of stuff inside gate. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-22-2010, 04:06 PM	#83
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 Big block 402/tiurbo 400 GMC Sierra parting now pic for truckdude Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-22-2010, 05:08 PM	#84
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,219	Re: 71 Big block 402/tiurbo 400 GMC Sierra parting now looks good i will sent a paypal out __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

10-23-2010, 07:11 AM	#85
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,219	Re: 71 Big block 402/tiurbo 400 GMC Sierra parting now tee how much for ma 2wd fan should for a 71 chevy shiped to 27104? __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

10-23-2010, 11:07 AM	#86
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 Big block 402/tiurbo 400 GMC Sierra parting now truckdude, I'll get your line out to you in mail Mon. Sorry I think I sold all my shrouds that I had, but i will look to make sure. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-23-2010, 12:20 PM	#87
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: 71 Big block 402/tiurbo 400 GMC Sierra parting now Hey Randy! Back again! How much for each individually, and a package deal for all of it shipped to Lolita, Tx 77971? (Truck is at Dad's house now for him to finish. jack and handle steering column firewall bracket fender to cowl seal brackets You can see the build thread with a lot of your parts at http://67-72chevytrucks.com/vboard/s...d.php?t=388241

10-23-2010, 05:57 PM	#88
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	Re: 71 Big block 402/tiurbo 400 GMC Sierra parting now Randy, I would like the carb spacer and power brake booster hose with bracket. And the rear bumper if it isnt damaged or rusted out. NO shipping. I'll pick this up first week of Dec. And I can haul stuff north for ya if anyone needs it. thanks Bruce __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

10-24-2010, 09:05 PM	#89
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 Big block 402/tiurbo 400 GMC Sierra parting now Steve, jack and handle $20, outer firewall column bracket free, fender cowl seals $10, plus shipping Bruce, I'm out of town the first weekend of Dec but I can get Eric and your parts to you. Carb spacer is sold, BB booster hose $10, I have 2 if you want another? Bumper I'll check out, if good $20 for it THANKS Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-24-2010, 09:25 PM	#90
HOTFUN Senior Member Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,142	Re: 71 Big block 402/tiurbo 400 GMC Sierra parting now Hi Randy How good are the mirrors? Looks like the 73 up style but do they have the date code marking on the glass at the top center? Let me know shape and price. Thanks, Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"



Register or Log In To remove these advertisements.

10-26-2010, 08:33 AM	#93
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 Big block 402/tiurbo 400 GMC Sierra parting now Sorry guys been gone alot the last 3 days, I'll answer questions tonight after work. Off to work now, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-26-2010, 03:25 PM	#94
newbraunie Registered User Join Date: Aug 2008 Location: Central TX Posts: 393	Re: 71 Big block 402/tiurbo 400 GMC Sierra parting now How are the rims? Looking for a set of stock rims 16x8 8 lug. I know shipping may be a deal killer but thought I would ask.

10-26-2010, 05:53 PM	#95
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 Big block 402/tiurbo 400 GMC Sierra parting now Hotfun, Mark, driver quality, I'll take them off and you can have them if you want them Wideside72, Steve, jack is froze up. Let me know what your wanting for sure and I'll get a quote 68C10Hotrod, Bryan, no problem on PS setup. Its still for sale complete or in pieces, haven't sold anything except motor stands off it Newbraunie, I have 2 16 inch rims is all right now Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-26-2010, 06:50 PM	#96
HOTFUN Senior Member Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,142	Re: 71 Big block 402/tiurbo 400 GMC Sierra parting now Thanks Randy, I need to make that trip one of these days too for that cab. I'll take the mirrors and if you can save the pads and mounts that would be great. So you want to just hold them there with the cab or send them out sometime as i can paypal some money too. Thanks so much. Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

10-26-2010, 11:34 PM	#98
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 Big block 402/tiurbo 400 GMC Sierra parting now Mark, no worries on money for mirrors, I can hold them for you. No worries on cab either, its at golf course out of the way. I still have my 72 swb 4x4, don't you need it? newbraunie, I'm not sure how wide, they still have tires on them, I don't think they are 8's though. $25 each plus shipping Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-27-2010, 01:00 PM	#100
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: 71 Big block 402/tiurbo 400 GMC Sierra parting now I will pass on the jack and handle. How much for all of it shipped to Lolita, Tx 77971 steering column firewall brackets/ bolts fender to cowl seal brackets

Register or Log In To remove these advertisements.