C-10 POWER CRUISE .....DINO'S or BUST !!! - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67cheby** · 06-07-2012, 11:23 PM

Awesome, thanks for the run down Dino, I am pumped to meet all of you guys !
Posted via Mobile Device

ddubbs · 06-07-2012, 11:29 PM

Man this is totally awesome!!!! That would be a dream to get to go and meet people of the forum and hangout. Wish I could go. Hope it works out so you guys do it again next year!!!!!
Posted via Mobile Device

BrianV · 06-08-2012, 12:00 AM

Sounds awesome
Ill be there haven't met any guys from the forum except for nate
Lookin forward to it
Maybe some of the guys from the west coast will have to plan a trip to a show in the midwest some time
Posted via Mobile Device

jwalk · 06-08-2012, 01:44 AM

Mike I'll just sit in my shop and watch you all pass by.
Posted via Mobile Device

darkhorse970 · 06-08-2012, 07:57 AM

Quote:

Originally Posted by Dinos63

The goodguys show is 16,17,18 of november, my party is friday 3 pm to around 11ish. friday at goodguys is pretty good. you could go spend some time check it out and then roll over to our party and eat dinner , we just do hamburgers, hotdog chips soda and water and some snacks. ( sorry no beer and stuff)i will have a area set up for some of the venders , nate p/b the chrome guy, and some others.I will be making about 250 shirts this year and handing them out .I can also help with trailer parking,hotels locations and such.Saturday i might try to arrange a breakfest spot to meet up it depends on were alot of guys stay scottsdale close to the show or central phoenix. we can play that by ear,saturday is a great day at goodguys and the most packed.Saturday night we got to a huge cruise spot not far from the show, sunday well .....??? this is the shirt from last year I am so stoked about this cruise and meet you duudes

Dino, do you guys not go to the show on Sunday? If not, it would be a full day of travel for me. Can you suggest a few hotels, any with group rate for the show? (Close to either your shop or the show, safe for the truck but simple and less expensive is what I'm looking for.)

I'm diggin' last years shirt!

big d's red67 · 06-08-2012, 10:06 AM

If I get my truck done I would love to go.

butternut1972 · 06-08-2012, 10:47 AM

That would great Dino if you could post some of the hotels that are close to the show. Thanks for the help.

502ms · 06-08-2012, 12:14 PM

too bad I am in Atlanta...I definitely need more gears to drive that far....I still have the TH400...and I would be stopping every 150 miles for gas. Looking at options for trans...

**67cheby** · 06-08-2012, 12:18 PM

Quote:

Originally Posted by jwalk

Mike I'll just sit in my shop and watch you all pass by.
Posted via Mobile Device

WHY ??? if your not bringing something you can at least catch a ride and go with us !

**67cheby** · 06-08-2012, 12:19 PM

Quote:

Originally Posted by big d's red67

If I get my truck done I would love to go.

Hey NO-ONE is further away from done then me !! AND MINE WILL BE DONE !

**67cheby** · 06-08-2012, 12:20 PM

Quote:

Originally Posted by 502ms

too bad I am in Atlanta...I definitely need more gears to drive that far....I still have the TH400...and I would be stopping every 150 miles for gas. Looking at options for trans...

Great man, get a trailer ! i still dont know if i want to drive it or trailer it myself ! Leaning towards driving but scared if something happened i would be stuck !

watahyahknow · 06-08-2012, 01:19 PM

Quote:

Originally Posted by 502ms

too bad I am in Atlanta...I definitely need more gears to drive that far....I still have the TH400...and I would be stopping every 150 miles for gas. Looking at options for trans...

an airplane ride (4 day stay) atl to lax or phx 359 dollar and a middle of the range rental car at alamo (only at LA) for that time would be about 130 dollar

maibe you can either land in phoenix and get a taxi or fly to LA somewhere and catch a ride with one of the others going there

Dinos63 · 06-08-2012, 04:14 PM

Depending on were you guys want to stay, out by scottsdale and the goodguys show or in phoenix i will try and hook up some hotel deals, scottsdale is kind of spendy its like our own lil hollywood

. also the sunday show is pretty dead. Our freeways and roads are very smooth and the travel between phoenix and scottsdale is 15-20mins , I could also maybe picking up some duudes from the airport my shops like 15min away

**67cheby** · 06-08-2012, 05:07 PM

Well then it sounds like we need to stay in Phoenix !! I am kind of cheap ! if none of you have noticed !! LOL

SBTork · 06-08-2012, 05:25 PM

I just did a quick mapquest from A (me) -to- B (phoenix) and I am 1720 miles away. That's a helluva drive......still thinking.....

**67cheby** · 06-08-2012, 05:29 PM

It will be worth it !!

big d's red67 · 06-08-2012, 10:31 PM

Quote:

Originally Posted by 67cheby

Hey NO-ONE is further away from done then me !! AND MINE WILL BE DONE !

Here is the distance I have to travel to get mine done, all I have to do is believe. Now I have a goal to reach so I can go.

**67cheby** · 06-08-2012, 10:53 PM

Hey you are ahead of me you'd motor and trams are in !
Posted via Mobile Device

**67cheby** · 06-08-2012, 10:54 PM

Your, trans
Posted via Mobile Device

big d's red67 · 06-08-2012, 11:09 PM

Quote:

Originally Posted by 67cheby

Hey you are ahead of me you'd motor and trams are in !
Posted via Mobile Device

True, my cab is in primer now too. A little progress but it is progress.

watahyahknow · 06-09-2012, 02:51 AM

it doesnt have to be painted , you could spray it in the ultimate hot rod colour : primer gray

**67cheby** · 06-09-2012, 09:34 AM

Hey guys looking at MAP QUEST this morning , here is a tenative idea . I would look at leaving Arkansas at 5 am on Nov 14th driving 2/3 of the way, staying the night in ALBUQUERQUE NM (734 miles the first day) making the second day a (465 mile day) on in to Phoenix, that way we would have the time to get the rigs washed up thursday night and get some rest and get ready for all of the Friday activities !

big d's red67 · 06-09-2012, 10:59 AM

Quote:

Originally Posted by 67cheby

Hey guys looking at MAP QUEST this morning , here is a tenative idea . I would look at leaving Arkansas at 5 am on Nov 14th driving 2/3 of the way, staying the night in ALBUQUERQUE NM (734 miles the first day) making the second day a (465 mile day) on in to Phoenix !

What route are you planing to take to get to I40?

**67cheby** · 06-09-2012, 11:03 AM

coming through Tulsa and Sapulpa I-44

big d's red67 · 06-09-2012, 11:11 AM

Have you considered going down HWY69 through Musgkogee strait down to I40 and across, no turnpike and not as much traffic?

06-07-2012, 11:23 PM	#76
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: C-10 POWER CRUISE .....DINO'S or BUST !!! Awesome, thanks for the run down Dino, I am pumped to meet all of you guys ! Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

06-07-2012, 11:29 PM	#77
ddubbs Registered User Join Date: Feb 2011 Location: Alaska Posts: 461	Re: C-10 POWER CRUISE .....DINO'S or BUST !!! Man this is totally awesome!!!! That would be a dream to get to go and meet people of the forum and hangout. Wish I could go. Hope it works out so you guys do it again next year!!!!! Posted via Mobile Device __________________ LIFTED OR LOW THE ONLY WAY TO GO!!!! Check out my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=517346 Projects 56 Chevy pickup Porterbuilt FR/RR dropmembers

06-08-2012, 12:00 AM	#78
BrianV Registered User Join Date: Mar 2010 Location: Mesa, Az Posts: 364	Re: C-10 POWER CRUISE .....DINO'S or BUST !!! Sounds awesome Ill be there haven't met any guys from the forum except for nate Lookin forward to it Maybe some of the guys from the west coast will have to plan a trip to a show in the midwest some time Posted via Mobile Device

06-08-2012, 01:44 AM	#79
jwalk What was I thinking? Join Date: Mar 2007 Location: oklahoma Posts: 1,137	Re: C-10 POWER CRUISE .....DINO'S or BUST !!! Mike I'll just sit in my shop and watch you all pass by. Posted via Mobile Device __________________ Justin '68 C/10 Custom Long wide bed '78 GMC Sierra short wide Project: Second time around...'68 short wide http://67-72chevytrucks.com/vboard/s...d.php?t=423949

06-08-2012, 10:06 AM	#81
big d's red67 Registered User Join Date: May 2010 Location: Broken Arrow Okla. Posts: 510	Re: C-10 POWER CRUISE .....DINO'S or BUST !!! If I get my truck done I would love to go. __________________ 1967 swb 454 cid 700R4 trans SOLD 2006 Chevy Trailblazer SS 2013 Camaro RS convertible the wife's Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=573248

06-08-2012, 10:47 AM	#82
butternut1972 Registered User Join Date: May 2009 Location: longview,wa Posts: 1,094	Re: C-10 POWER CRUISE .....DINO'S or BUST !!! That would great Dino if you could post some of the hotels that are close to the show. Thanks for the help. __________________ 1972 GMC (PROJECT LONG OVERDUE) 1998 SWB 4WD

06-08-2012, 12:14 PM	#83
502ms Registered User Join Date: Aug 2011 Location: Atlanta, GA Posts: 1,523	Re: C-10 POWER CRUISE .....DINO'S or BUST !!! too bad I am in Atlanta...I definitely need more gears to drive that far....I still have the TH400...and I would be stopping every 150 miles for gas. Looking at options for trans... __________________ Best Regards, Leon M. Instagram: @TheDirtyDianah Bagged \| 6.0L LS \| T-56 (6-Speed Manual) \| Turbo Burnout/Rolling Video: Chevy C10 Stepside 6.0L LSx & 6-Speed Manual

06-08-2012, 04:14 PM	#88
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: C-10 POWER CRUISE .....DINO'S or BUST !!! Depending on were you guys want to stay, out by scottsdale and the goodguys show or in phoenix i will try and hook up some hotel deals, scottsdale is kind of spendy its like our own lil hollywood. also the sunday show is pretty dead. Our freeways and roads are very smooth and the travel between phoenix and scottsdale is 15-20mins , I could also maybe picking up some duudes from the airport my shops like 15min away __________________ CHEVY ONLY... Nothin Else !

06-08-2012, 05:07 PM	#89
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: C-10 POWER CRUISE .....DINO'S or BUST !!! Well then it sounds like we need to stay in Phoenix !! I am kind of cheap ! if none of you have noticed !! LOL __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

06-08-2012, 05:25 PM	#90
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,856	Re: C-10 POWER CRUISE .....DINO'S or BUST !!! I just did a quick mapquest from A (me) -to- B (phoenix) and I am 1720 miles away. That's a helluva drive......still thinking..... __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

06-08-2012, 05:29 PM	#91
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: C-10 POWER CRUISE .....DINO'S or BUST !!! It will be worth it !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

06-08-2012, 10:53 PM	#93
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: C-10 POWER CRUISE .....DINO'S or BUST !!! Hey you are ahead of me you'd motor and trams are in ! Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

06-08-2012, 10:54 PM	#94
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: C-10 POWER CRUISE .....DINO'S or BUST !!! Your, trans Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

06-09-2012, 02:51 AM	#96
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: C-10 POWER CRUISE .....DINO'S or BUST !!! it doesnt have to be painted , you could spray it in the ultimate hot rod colour : primer gray __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

06-09-2012, 09:34 AM	#97
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: C-10 POWER CRUISE .....DINO'S or BUST !!! Hey guys looking at MAP QUEST this morning , here is a tenative idea . I would look at leaving Arkansas at 5 am on Nov 14th driving 2/3 of the way, staying the night in ALBUQUERQUE NM (734 miles the first day) making the second day a (465 mile day) on in to Phoenix, that way we would have the time to get the rigs washed up thursday night and get some rest and get ready for all of the Friday activities ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172



Register or Log In To remove these advertisements.

06-09-2012, 11:03 AM	#99
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: C-10 POWER CRUISE .....DINO'S or BUST !!! coming through Tulsa and Sapulpa I-44 __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

06-09-2012, 11:11 AM	#100
big d's red67 Registered User Join Date: May 2010 Location: Broken Arrow Okla. Posts: 510	Re: C-10 POWER CRUISE .....DINO'S or BUST !!! Have you considered going down HWY69 through Musgkogee strait down to I40 and across, no turnpike and not as much traffic? __________________ 1967 swb 454 cid 700R4 trans SOLD 2006 Chevy Trailblazer SS 2013 Camaro RS convertible the wife's Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=573248

Register or Log In To remove these advertisements.