MI 72 BB Longhorn - Getin the AX !! - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

longhorn70gmc · 08-18-2012, 03:33 PM

Quote:

Originally Posted by DaHos

They are to stay with the frame as a roller, thx

They are still available, the drives side is still a nice "driver" piece other than the steel hardware has not held the test of time as well as the stainless has..$26 shipped

Thanks for getting back to me. I'll take them, can I send you a money order?
R/
Billy

**lks dcvn** · 08-18-2012, 06:54 PM

How is the passenger side inner fender?

I may be interested in a few rear bed parts for cuts since my blazer is a bit banged up in the same spot.

Let me know. I can drive up tomorrow and pay/pick them up if you are around...

Thanks.

**gmc 2500 4x4** · 08-18-2012, 07:33 PM

dahos, dome looks good. do you know what type of screws/clips hold the housing to the cab? or do you have them?..i will pm you my info

**DaHos** · 08-19-2012, 08:55 AM

Quote:

Originally Posted by longhorn70gmc

Thanks for getting back to me. I'll take them, can I send you a money order?
R/
Billy

In your 1st post you stated you needed "One" mirror, price was quoted for the "One" good Drivers side mirror and arm, I can include the pass side for $40 shipped for the pair, and yes I will take PO MO.

Quote:

Originally Posted by lks dcvn

How is the passenger side inner fender?

I may be interested in a few rear bed parts for cuts since my blazer is a bit banged up in the same spot.

Let me know. I can drive up tomorrow and pay/pick them up if you are around...

Thanks.

Inner front lip is gone, PM sent......

Quote:

Originally Posted by gmc 2500 4x4

dahos, dome looks good. do you know what type of screws/clips hold the housing to the cab? or do you have them?..i will pm you my info

No screws, just clips into place.

longhorn70gmc · 08-20-2012, 12:51 PM

[QUOTE=DaHos;5546583]In your 1st post you stated you needed "One" mirror, price was quoted for the "One" good Drivers side mirror and arm, I can include the pass side for $40 shipped for the pair, and yes I will take PO MO.

Hello DAHOS, I APOLIGIZE for any confusion, I didn't catch that. Yes, I only need the driver side. Thanks for excepting the MO. Can I get your address in a PM to get the MO done up for you? Just to remind myself and to let you I am on the same page, "One" good Drivers side mirror and arm at 26 shipped, got ya! This will teach me to slow down next time when I get in a hurry. Anyway, thanks for working on this with me.
R/
Billy

Pmarti69 · 08-20-2012, 09:04 PM

Do you still have the uncut dash with a/c vent and all hoses, but without dash door. If so your asking price shipped to 77345,

Thanks Paul

Fogline69 · 08-21-2012, 12:07 AM

How much for the seat belts? Could not tell if anyone took them yet.

Thanks
Posted via Mobile Device

72cheyenneman · 08-21-2012, 06:16 AM

Do yo have the small pin that holds the automatic shifter handle on the steering column? It's about an inch long (automatic shifter handle pin). Thanks, Casey

**DaHos** · 08-21-2012, 06:24 AM

Quote:

Originally Posted by Pmarti69

Do you still have the uncut dash with a/c vent and all hoses, but without dash door. If so your asking price shipped to 77345,

Thanks Paul

The Cab is staying complete.

Quote:

Originally Posted by Fogline69

How much for the seat belts? Could not tell if anyone took them yet.

Thanks
Posted via Mobile Device

Belts are still available, very nice shape. $75 plus shipping.

Quote:

Originally Posted by 72cheyenneman

Do yo have the small pin that holds the automatic shifter handle on the steering column? It's about an inch long (automatic shifter handle pin). Thanks, Casey

No spare columns to part out, keeping this one complete.

longhorn70gmc · 08-21-2012, 04:13 PM

Hello DAHOS,
got the MO, 26 bucks on its way to you. Thanks for the address and name for the letter. Thanks for taking care of me!
R/
Billy

**DaHos** · 08-26-2012, 12:03 PM

Sunday Bumpppppppppp

**DaHos** · 08-26-2012, 01:43 PM

Quote:

Originally Posted by lks dcvn

I may be interested in a few rear bed parts for cuts since my blazer is a bit banged up in the same spot.

Here are the corners. There is some tweaking on the Ds and the pass side has one small dimple. I got the PM for the outer cuts, how much of the inner do you need? Just a lot of welds in this area............

72SWBChevy · 08-28-2012, 11:01 AM

..Grill, inner and outer with headlight buckets and bezels (complete) - $100..

Interested in grill, pending more pics and condition. Any dents, dings etc. Are you willing to ship to 77018 Houston?
Thanks
Craig

longhorn70gmc · 08-30-2012, 05:23 PM

Hello Dave,
I like the Mirror and arms. They came in today and I appreciate it.
Thanks for taking care of me, you are good people and I wish you lots of luck on your future sales!!!!
R/
Billy

**DaHos** · 09-01-2012, 02:50 PM

Quote:

Originally Posted by longhorn70gmc

Hello Dave,
I like the Mirror and arms. They came in today and I appreciate it.
Thanks for taking care of me, you are good people and I wish you lots of luck on your future sales!!!!
R/
Billy

Any time, thx you also.....

Quote:

Originally Posted by 72SWBChevy

..Grill, inner and outer with headlight buckets and bezels (complete) - $100..

Interested in grill, pending more pics and condition. Any dents, dings etc. Are you willing to ship to 77018 Houston?
Thanks
Craig

Just checked it out again, the inner is cracked at the hood latch and the outer was tweaked on the lower edge by the bumper being pushed in.

Cheyenne Supr · 09-01-2012, 06:03 PM

The steering wheel pictured in the cab interior, with the leather wrap, does not look like the stock 69-72 wheel. Is that the one you are selling?

54belair · 09-01-2012, 06:20 PM

Hi,

Will you take $45. shipped for the gas pedal, rod and cable assy?

**DaHos** · 09-01-2012, 10:40 PM

Quote:

Originally Posted by Cheyenne Supr

The steering wheel pictured in the cab interior, with the leather wrap, does not look like the stock 69-72 wheel. Is that the one you are selling?

That is the 73+ style that is being sold w the column, see post #47 for the 69-72 one for sale.

Quote:

Originally Posted by 54belair

Hi,

Will you take $45. shipped for the gas pedal, rod and cable assy?

Will do..

**jocko** · 09-01-2012, 11:13 PM

I may have missed the follow-up in here somewhere - and understand you want to keep the cab together - just not sure what that includes, so I'll ask!

Is the a/c control unit/head available? Don't really need cables and beyond, just the face and control head. If available, interested in a pic/condition, and a price shipped to 93555.

If not available, no worries, I understand. Thank you.

54belair · 09-01-2012, 11:26 PM

OK< Ill take the gas pedal for $45. shipped.

thanks, (pm sent)

Fogline69 · 09-01-2012, 11:32 PM

Sorry for the delay getting back. I think I will pass on the seatbelts, but am interested in the steering wheel and the green visors. Was trying to figure out if they were gone.

How much to 95404?

Thanks

**DaHos** · 09-02-2012, 08:00 AM

Quote:

Originally Posted by Fogline69

Sorry for the delay getting back. I think I will pass on the seatbelts, but am interested in the steering wheel and the green visors. Was trying to figure out if they were gone.

How much to 95404?

Thanks

Still here.......steering wheel w horn button $100, visors $35, I will go $135 shipped. If you do want to bite on the seat belts also Id do $200 for all.

Mo or PayPal

54belair · 09-02-2012, 05:57 PM

payment sent to your paypal for the gas pedal.

thanks,,,

steve

Fogline69 · 09-08-2012, 10:25 AM

Quote:

Originally Posted by DaHos

Still here.......steering wheel w horn button $100, visors $35, I will go $135 shipped. If you do want to bite on the seat belts also Id do $200 for all.

Mo or PayPal

How about 120? I have a line on some nicer visors for 20 but would it would be easier to get the deal done with one person.

Can PP you today if you want to do the deal.
Thanks,
Brent
Posted via Mobile Device

**DaHos** · 09-08-2012, 10:45 AM

Quote:

Originally Posted by Fogline69

How about 120? I have a line on some nicer visors for 20 but would it would be easier to get the deal done with one person.

Can PP you today if you want to do the deal.
Thanks,
Brent
Posted via Mobile Device

Sounds fair, PM heading your way.........

08-18-2012, 06:54 PM	#77
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,339	Re: 72 BB Longhorn - Getin the AX !! How is the passenger side inner fender? I may be interested in a few rear bed parts for cuts since my blazer is a bit banged up in the same spot. Let me know. I can drive up tomorrow and pay/pick them up if you are around... Thanks.

08-18-2012, 07:33 PM	#78
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,894	Re: 72 BB Longhorn - Getin the AX !! dahos, dome looks good. do you know what type of screws/clips hold the housing to the cab? or do you have them?..i will pm you my info

08-20-2012, 12:51 PM	#80
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: 72 BB Longhorn - Getin the AX !! [QUOTE=DaHos;5546583]In your 1st post you stated you needed "One" mirror, price was quoted for the "One" good Drivers side mirror and arm, I can include the pass side for $40 shipped for the pair, and yes I will take PO MO. Hello DAHOS, I APOLIGIZE for any confusion, I didn't catch that. Yes, I only need the driver side. Thanks for excepting the MO. Can I get your address in a PM to get the MO done up for you? Just to remind myself and to let you I am on the same page, "One" good Drivers side mirror and arm at 26 shipped, got ya! This will teach me to slow down next time when I get in a hurry. Anyway, thanks for working on this with me. R/ Billy __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

08-20-2012, 09:04 PM	#81
Pmarti69 Registered User Join Date: Feb 2012 Location: North of Houston, Tx Posts: 346	Re: 72 BB Longhorn - Getin the AX !! Do you still have the uncut dash with a/c vent and all hoses, but without dash door. If so your asking price shipped to 77345, Thanks Paul __________________ Houston Area Lawman 72 GMC Fleetside (AKA: MERLIN) ZZ4 Crate Engine TH400 with Stage two kit

08-21-2012, 12:07 AM	#82
Fogline69 Registered User Join Date: Aug 2012 Location: Santa Rosa, Ca Posts: 30	Re: 72 BB Longhorn - Getin the AX !! How much for the seat belts? Could not tell if anyone took them yet. Thanks Posted via Mobile Device

08-21-2012, 06:16 AM	#83
72cheyenneman Registered User Join Date: Nov 2009 Location: New Orleans, Louisiana Posts: 610	Re: 72 BB Longhorn - Getin the AX !! Do yo have the small pin that holds the automatic shifter handle on the steering column? It's about an inch long (automatic shifter handle pin). Thanks, Casey

08-21-2012, 04:13 PM	#85
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: 72 BB Longhorn - Getin the AX !! Hello DAHOS, got the MO, 26 bucks on its way to you. Thanks for the address and name for the letter. Thanks for taking care of me! R/ Billy __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

08-26-2012, 12:03 PM	#86
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,854	Re: 72 BB Longhorn - Getin the AX !! Sunday Bumpppppppppp __________________ 1967 C10 SWB Owner - Rustbelt Restorations

08-28-2012, 11:01 AM	#88
72SWBChevy Registered User Join Date: Jun 2004 Location: Houston Tx Posts: 753	Re: 72 BB Longhorn - Getin the AX !! ..Grill, inner and outer with headlight buckets and bezels (complete) - $100.. Interested in grill, pending more pics and condition. Any dents, dings etc. Are you willing to ship to 77018 Houston? Thanks Craig __________________ 1977 Camaro 468 BBC - SOLD - 1972 Chevy SWB....in the works!! 2006 Crew Cab Dmax/Allison Summit White-SOLD- 2009 Toyota Tacoma V6 Pre Runner - daily driver - my build thread -http://67-72chevytrucks.com/vboard/s...95#post4774595

08-30-2012, 05:23 PM	#89
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: 72 BB Longhorn - Getin the AX !! Hello Dave, I like the Mirror and arms. They came in today and I appreciate it. Thanks for taking care of me, you are good people and I wish you lots of luck on your future sales!!!! R/ Billy __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

09-01-2012, 06:03 PM	#91
Cheyenne Supr Registered User Join Date: Dec 2003 Location: Nashville Posts: 48	Re: 72 BB Longhorn - Getin the AX !! The steering wheel pictured in the cab interior, with the leather wrap, does not look like the stock 69-72 wheel. Is that the one you are selling? __________________ Larry 72 Cheyenne LWB Fleetside Oak Bed 350 w/ TH400 (finally complete!). 69 Chevy C-10 LWB 350 w/ TH350 (good 'ol rusty bullet proof dependable hauler). 02 Suburban Z71 4x4 (wife's driver).

09-01-2012, 06:20 PM	#92
54belair Registered User Join Date: Mar 2011 Location: bolivar, mo Posts: 839	Re: 72 BB Longhorn - Getin the AX !! Hi, Will you take $45. shipped for the gas pedal, rod and cable assy? __________________ 1997 shortie stepside 1968 short stepside 1966 mustang 1966 chevelle ss Dont always go the cheapest route--You can save yourself into the poorhouse! My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=489030

09-01-2012, 11:13 PM	#94
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,937	Re: 72 BB Longhorn - Getin the AX !! I may have missed the follow-up in here somewhere - and understand you want to keep the cab together - just not sure what that includes, so I'll ask! Is the a/c control unit/head available? Don't really need cables and beyond, just the face and control head. If available, interested in a pic/condition, and a price shipped to 93555. If not available, no worries, I understand. Thank you.

09-01-2012, 11:26 PM	#95
54belair Registered User Join Date: Mar 2011 Location: bolivar, mo Posts: 839	Re: 72 BB Longhorn - Getin the AX !! OK< Ill take the gas pedal for $45. shipped. thanks, (pm sent) __________________ 1997 shortie stepside 1968 short stepside 1966 mustang 1966 chevelle ss Dont always go the cheapest route--You can save yourself into the poorhouse! My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=489030

09-01-2012, 11:32 PM	#96
Fogline69 Registered User Join Date: Aug 2012 Location: Santa Rosa, Ca Posts: 30	Re: 72 BB Longhorn - Getin the AX !! Sorry for the delay getting back. I think I will pass on the seatbelts, but am interested in the steering wheel and the green visors. Was trying to figure out if they were gone. How much to 95404? Thanks



Register or Log In To remove these advertisements.

09-02-2012, 05:57 PM	#98
54belair Registered User Join Date: Mar 2011 Location: bolivar, mo Posts: 839	Re: 72 BB Longhorn - Getin the AX !! payment sent to your paypal for the gas pedal. thanks,,, steve __________________ 1997 shortie stepside 1968 short stepside 1966 mustang 1966 chevelle ss Dont always go the cheapest route--You can save yourself into the poorhouse! My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=489030

Register or Log In To remove these advertisements.