AL parting a 71 4x4 lwb truck - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WETOWM** · 03-26-2013, 08:52 PM

is the original tailpipe hanger still there ?

*mrdana60* · 03-26-2013, 08:54 PM

i believe so. will have to make sure.

**WETOWM** · 03-26-2013, 09:11 PM

if so post some pictures thanks

rusty knuckles 5 · 03-26-2013, 09:59 PM

Hi! I am looking for the proportioning valve bracket. thanks! Rod

*mrdana60* · 03-26-2013, 10:06 PM

sold the brake booster and brackets

dave666693 · 03-28-2013, 11:14 AM

Do you still have a front driveshaft? If so, send me a picture please.

*mrdana60* · 03-28-2013, 06:07 PM

Yes I have about 4 driveshafts can you get me a length on what you need? I just threw them in the pile and cant rem which come from what truck. I will get you a pic also

**lawest** · 03-29-2013, 08:33 AM

Auto crossmember and eng mount stands available?

*mrdana60* · 03-29-2013, 05:39 PM

Quote:

Originally Posted by lawest

Auto crossmember and eng mount stands available?

Yes anything I have is for sale

Do you need complete engine cross memeber? Would like to keep it and the motor mount plates together. And yes trans crossmemeber take 125 for both plus shipping.

dave666693 · 03-29-2013, 05:50 PM

front driveshaft is 27 !/2 from center of TC ujoint to the front end ujoint.
NP205 and Dana 44 automatic.

*mrdana60* · 03-29-2013, 10:15 PM

Quote:

Originally Posted by dave666693

front driveshaft is 27 !/2 from center of TC ujoint to the front end ujoint.
NP205 and Dana 44 automatic.

i will check and get pic tomorrow after 2-3 .

*mrdana60* · 03-30-2013, 05:13 PM

these drive shafts are the same length from u joint to u joint. fully collapsed they are 25 inches. they come from a truck with trans and t case still in the truck and it was a 350/205 combo . one looks longer but it has a shorter slip yoke. and the other has a longer slip yoke.

dave666693 · 03-30-2013, 09:03 PM

how much for the longer one shipped to 98372?

*mrdana60* · 03-30-2013, 10:47 PM

Will do 75 shipped

**lawest** · 03-31-2013, 12:01 AM

Quote:

Originally Posted by mrdana60

Yes anything I have is for sale

Do you need complete engine cross memeber? Would like to keep it and the motor mount plates together. And yes trans crossmemeber take 125 for both plus shipping.

I just need an auto trans crossmember and v8 engine mount stands. Shipping to 73089. Thanks

*mrdana60* · 03-31-2013, 12:09 AM

Quote:

Originally Posted by lawest

I just need an auto trans crossmember and v8 engine mount stands. Shipping to 73089. Thanks

Gonna keep the engine cross member together. Will take 50 plus the ride for the auto crossmember.you do want these parts for a 4 wheel drive right?

**lawest** · 03-31-2013, 12:22 AM

Yes, I need it for a 4X4. Do you still have the T-case mounts and brackets too? If you will include those and get a shipping quote, then pm me your payment info. Thanks

dave666693 · 03-31-2013, 12:41 AM

I'll take it. PayPal?

*mrdana60* · 03-31-2013, 08:08 AM

Quote:

Originally Posted by lawest

Yes, I need it for a 4X4. Do you still have the T-case mounts and brackets too? If you will include those and get a shipping quote, then pm me your payment info. Thanks

Will do 50 for crossmember, 25 for t case mount and rubber gromments and 30 for shipping. So make it. 105 shipped. Pm coming your way

freakshow108 · 04-02-2013, 10:51 PM

Do you still have the front bumper brackets?
Posted via Mobile Device

**lawest** · 04-03-2013, 10:43 AM

Quote:

Originally Posted by mrdana60

Will do 50 for crossmember, 25 for t case mount and rubber gromments and 30 for shipping. So make it. 105 shipped. Pm coming your way

PayPal payment and PM sent, Thanks

WBarlow · 04-03-2013, 12:07 PM

How much for the frame? I need one with all the mount brackets in place (none cut off with a cutting torch). I would also like all spring hangers in place. I have the trans cross member, so I don't need that. I have a blazer 4X4 frame to change all else over from.

72blazerblue · 04-03-2013, 05:41 PM

Did the tow hooks sale? I'd be interested!

*mrdana60* · 04-03-2013, 05:50 PM

Quote:

Originally Posted by WBarlow

How much for the frame? I need one with all the mount brackets in place (none cut off with a cutting torch). I would also like all spring hangers in place. I have the trans cross member, so I don't need that. I have a blazer 4X4 frame to change all else over from.

Take 400 for bare frame. All spring mounts and shackles still in place.

*mrdana60* · 04-03-2013, 05:51 PM

Quote:

Originally Posted by freakshow108

Do you still have the front bumper brackets?
Posted via Mobile Device

Yes I do say 60 shipped?

03-26-2013, 08:52 PM	#76
WETOWM Senior Member Join Date: Jun 2011 Location: ST LOUIS MO Posts: 2,101	Re: parting a 71 4x4 lwb truck is the original tailpipe hanger still there ?

03-26-2013, 08:54 PM	#77
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: parting a 71 4x4 lwb truck i believe so. will have to make sure.

03-26-2013, 09:11 PM	#78
WETOWM Senior Member Join Date: Jun 2011 Location: ST LOUIS MO Posts: 2,101	Re: parting a 71 4x4 lwb truck if so post some pictures thanks

03-26-2013, 09:59 PM	#79
rusty knuckles 5 Registered User Join Date: Dec 2011 Location: coulterville calif Posts: 263	Re: parting a 71 4x4 lwb truck Hi! I am looking for the proportioning valve bracket. thanks! Rod

03-26-2013, 10:06 PM	#80
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: parting a 71 4x4 lwb truck sold the brake booster and brackets

03-28-2013, 11:14 AM	#81
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	Re: parting a 71 4x4 lwb truck Do you still have a front driveshaft? If so, send me a picture please. __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

03-28-2013, 06:07 PM	#82
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: parting a 71 4x4 lwb truck Yes I have about 4 driveshafts can you get me a length on what you need? I just threw them in the pile and cant rem which come from what truck. I will get you a pic also

03-29-2013, 08:33 AM	#83
lawest Registered User Join Date: Jan 2008 Location: Tuttle, OK Posts: 205	Re: parting a 71 4x4 lwb truck Auto crossmember and eng mount stands available? __________________ 69 K10 SWB Project Dream '69 2011 K2500 Silverado Beat to fit, Paint to match Dream '69 Build Thread

03-29-2013, 05:50 PM	#85
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	Re: parting a 71 4x4 lwb truck front driveshaft is 27 !/2 from center of TC ujoint to the front end ujoint. NP205 and Dana 44 automatic. __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

03-30-2013, 05:13 PM	#87
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: parting a 71 4x4 lwb truck these drive shafts are the same length from u joint to u joint. fully collapsed they are 25 inches. they come from a truck with trans and t case still in the truck and it was a 350/205 combo . one looks longer but it has a shorter slip yoke. and the other has a longer slip yoke.

03-30-2013, 09:03 PM	#88
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	Re: parting a 71 4x4 lwb truck how much for the longer one shipped to 98372? __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

03-30-2013, 10:47 PM	#89
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: parting a 71 4x4 lwb truck Will do 75 shipped

03-31-2013, 12:22 AM	#92
lawest Registered User Join Date: Jan 2008 Location: Tuttle, OK Posts: 205	Re: parting a 71 4x4 lwb truck Yes, I need it for a 4X4. Do you still have the T-case mounts and brackets too? If you will include those and get a shipping quote, then pm me your payment info. Thanks __________________ 69 K10 SWB Project Dream '69 2011 K2500 Silverado Beat to fit, Paint to match Dream '69 Build Thread

03-31-2013, 12:41 AM	#93
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	Re: parting a 71 4x4 lwb truck I'll take it. PayPal? __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

04-02-2013, 10:51 PM	#95
freakshow108 Registered User Join Date: May 2010 Location: Eatonville WA Posts: 296	Re: parting a 71 4x4 lwb truck Do you still have the front bumper brackets? Posted via Mobile Device



Register or Log In To remove these advertisements.

04-03-2013, 12:07 PM	#97
WBarlow Registered User Join Date: Mar 2012 Location: Vivian,La Posts: 23	Re: parting a 71 4x4 lwb truck How much for the frame? I need one with all the mount brackets in place (none cut off with a cutting torch). I would also like all spring hangers in place. I have the trans cross member, so I don't need that. I have a blazer 4X4 frame to change all else over from.

04-03-2013, 05:41 PM	#98
72blazerblue Registered User Join Date: Feb 2012 Location: Durant, ok Posts: 218	Re: parting a 71 4x4 lwb truck Did the tow hooks sale? I'd be interested! __________________ 1967 SWB C-10 1972 Blazer 4x4 2011 Silverado

Register or Log In To remove these advertisements.