IA NOS '67-'72 GM Pickup Lock Set - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

swamp rat · 03-25-2014, 12:12 PM

Quote:

Originally Posted by LockDoc

Nothing at this time. That would be the switch without the accessory position, the small, hard to find spacer and small bezel. There were a couple of '67 only spacers on the parts board a few days ago. The bezel should be available new from any parts vendor but the spacer is not reproduced. '67 used the "A" keyway with the small Octagon head key. I will let you know if I come across anything.

LockDoc

Thanks, i have a switch still installed but the tumbler is hacked so i'm assuming that if i can get the tumbler out than the rest of the switch is good and has the spacer.

swamp rat · 03-25-2014, 12:13 PM

Quote:

Originally Posted by LockDoc

Nothing at this time. That would be the switch without the accessory position, the small, hard to find spacer and small bezel. There were a couple of '67 only spacers on the parts board a few days ago. The bezel should be available new from any parts vendor but the spacer is not reproduced. '67 used the "A" keyway with the small Octagon head key. I will let you know if I come across anything.

LockDoc

Would a newer style switch with the accessory position fit?

**LockDoc** · 03-25-2014, 12:36 PM

Quote:

Originally Posted by swamp rat

Thanks, i have a switch still installed but the tumbler is hacked so i'm assuming that if i can get the tumbler out than the rest of the switch is good and has the spacer.

Yes, if you can get the lock cylinder out without damaging the switch you can re-use all of the parts. If you drill it just don't drill too deep. Put a piece of masking tape up about 3/4 -7/8 of an inch on the bit and don't go any deeper than that.

Quote:

Originally Posted by swamp rat

Would a newer style switch with the accessory position fit?

Yes, it will fit but the wires in the connector will be different.

LockDoc

swamp rat · 03-25-2014, 01:07 PM

Quote:

Originally Posted by LockDoc

Yes, if you can get the lock cylinder out without damaging the switch you can re-use all of the parts. If you drill it just don't drill too deep. Put a piece of masking tape up about 3/4 -7/8 of an inch on the bit and don't go any deeper than that.

Yes, it will fit but the wires in the connector will be different.

LockDoc

Thank you for the info!

lousblown55chevy · 03-25-2014, 03:23 PM

Not sure if you will sell this way but I need a complete set plus 2 extra doors , building a crew cab. If you get more. Thanks Louis

**LockDoc** · 03-25-2014, 09:06 PM

Quote:

Originally Posted by lousblown55chevy

Not sure if you will sell this way but I need a complete set plus 2 extra doors , building a crew cab. If you get more. Thanks Louis

Yes, I would do that. I will put you in line.

LockDoc

**LockDoc** · 03-25-2014, 09:08 PM

Quote:

Originally Posted by lousblown55chevy

Not sure if you will sell this way but I need a complete set plus 2 extra doors , building a crew cab. If you get more. Thanks Louis

In line,

Thanks,
LockDoc

Elliot949 · 03-25-2014, 09:31 PM

Leon's Stuff here is AWESOME!!!!... I just got my stuff from him...

**yote1234** · 03-26-2014, 07:07 PM

got mine,,, i thank you sir

**LockDoc** · 03-27-2014, 09:49 AM

Quote:

Originally Posted by rkintn_68

i'll get in line also ... thanks ...

I had one member pass on his lock set. You are next up. PM sent.

Quote:

Originally Posted by Elliot949

Leon's Stuff here is AWESOME!!!!... I just got my stuff from him...

Thanks for the kudo's

Quote:

Originally Posted by yote1234

got mine,,, i thank you sir

You are welcome. Thank you.

LockDoc

litew8 · 03-27-2014, 12:08 PM

Received yesterday. Thanks again, Leon!

rkintn_68 · 03-27-2014, 06:07 PM

Money sent via PP ... Thanks !!!

djgebert · 03-27-2014, 06:18 PM

It looks like you have a long list of people waiting, but I will take a set if you ever get down to me. Thanks!

swamp rat · 03-27-2014, 06:33 PM

Quote:

Originally Posted by LockDoc

Yes, if you can get the lock cylinder out without damaging the switch you can re-use all of the parts. If you drill it just don't drill too deep. Put a piece of masking tape up about 3/4 -7/8 of an inch on the bit and don't go any deeper than that.

Yes, it will fit but the wires in the connector will be different.

LockDoc

Got another question, do the tumblers interchange between the late and newer switches or are they different?If the same i would definitely order because i have no door key or ign at this point.

Are replacement 67 switches available?

Started the drilling process but not done yet.

**LockDoc** · 03-27-2014, 06:55 PM

Quote:

Originally Posted by djgebert

It looks like you have a long list of people waiting, but I will take a set if you ever get down to me. Thanks!

I will put you on the list.

Thanks,
LockDoc

**LockDoc** · 03-27-2014, 07:02 PM

Quote:

Originally Posted by swamp rat

Got another question, do the tumblers interchange between the late and newer switches or are they different?If the same i would definitely order because i have no door key or ign at this point.

Are replacement 67 switches available?

Started the drilling process but not done yet.

The ignition cylinders and door cylinders are all physically the same '67-'72.

To the best of my knowledge all of the new ignition switches are the later style with the Acc. position. I have a couple of '67 switches but I haven't tested them yet.

LockDoc

chevyguy_72 · 03-28-2014, 09:05 AM

My parts showed up yesterday and looked fantastic.
Thanks again.

**LockDoc** · 04-07-2014, 02:56 PM

Received a few more sets. Notices sent to the following members in line....

Quote:

Originally Posted by t76turbo

I know it's a long shot, but if you find another set, I am in need. I have no door lock keys so my truck stays unlocked where ever I go.

Quote:

Originally Posted by CC69Rat

Long shot I know .. but just in case add me to the list if you can please. I'll take a set if they get to me.

Quote:

Originally Posted by MidWest72C10

Add me to your list if/when you receive more

Quote:

Originally Posted by darkhorse970

Put me in line too Leon, just in case you can get more.

Quote:

Originally Posted by Mike's money pit

Put me in line for two sets, please. If matching glove box locks are available I will take both sets with them.
Thanks,
Mike

Quote:

Originally Posted by CUSTOM/10

If you have a set left for a 72 I'll take one.

Gary

Thanks,
LockDoc

**LockDoc** · 04-07-2014, 02:59 PM

Quote:

Originally Posted by chevyguy_72

My parts showed up yesterday and looked fantastic.
Thanks again.

Sounds good. Thanks for letting me know.

LockDoc

**CUSTOM/10** · 04-07-2014, 03:08 PM

Paypal sent !

Gary

mcbassin · 04-07-2014, 04:04 PM

Got mine a while back. Awesome!!! thanks Leon

**CC69Rat** · 04-07-2014, 06:09 PM

Crazy day today my brother, PP sent asap. I'll take a set.

**t76turbo** · 04-07-2014, 06:21 PM

Quote:

Originally Posted by LockDoc

Received a few more sets. Notices sent to the following members in line....

Thanks,
LockDoc

Paypal sent early today. Thanks for including me.

MidWest72C10 · 04-07-2014, 07:11 PM

Leon be on the look out for my payment in paypal. Thanks again.

Scott

rwhite692 · 04-07-2014, 07:38 PM

Hi Leon, Please add me to the list for a set! Thanks, Rob

03-25-2014, 03:23 PM	#80
lousblown55chevy Registered User Join Date: Feb 2012 Location: Saint Charles MO. Posts: 197	Re: NOS '67-'72 GM Pickup Lock Set Not sure if you will sell this way but I need a complete set plus 2 extra doors , building a crew cab. If you get more. Thanks Louis

03-25-2014, 09:31 PM	#83
Elliot949 Registered User Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: NOS '67-'72 GM Pickup Lock Set Leon's Stuff here is AWESOME!!!!... I just got my stuff from him...

03-26-2014, 07:07 PM	#84
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,276	Re: NOS '67-'72 GM Pickup Lock Set got mine,,, i thank you sir __________________ 1971 K5 CST Blazer 1965 Chevelle Malibu 283 (sadly sold) 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

03-27-2014, 12:08 PM	#86
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: NOS '67-'72 GM Pickup Lock Set Received yesterday. Thanks again, Leon! __________________ project: "my happy mess"

03-27-2014, 06:07 PM	#87
rkintn_68 Registered User Join Date: Sep 2012 Location: clarksville tn Posts: 811	Re: NOS '67-'72 GM Pickup Lock Set Money sent via PP ... Thanks !!! __________________ 72 GMC K 1500 SWB W/ 68 CHEVY FR/CLIP -- SOLD 70 CHEVY C/10 LWB x 2 ----- SOLD 67 CHEVY SWB IN PROGRESS " ALMOST HEAVEN " Build thread : http://67-72chevytrucks.com/vboard/s...15#post6826315

03-27-2014, 06:18 PM	#88
djgebert Registered User Join Date: Jan 2008 Location: Fort Wayne, Indiana Posts: 197	Re: NOS '67-'72 GM Pickup Lock Set It looks like you have a long list of people waiting, but I will take a set if you ever get down to me. Thanks!

03-28-2014, 09:05 AM	#92
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Broomfield, CO Posts: 956	Re: NOS '67-'72 GM Pickup Lock Set My parts showed up yesterday and looked fantastic. Thanks again.

04-07-2014, 03:08 PM	#95
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,797	Re: NOS '67-'72 GM Pickup Lock Set Paypal sent ! Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

04-07-2014, 04:04 PM	#96
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: NOS '67-'72 GM Pickup Lock Set Got mine a while back. Awesome!!! thanks Leon __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

04-07-2014, 06:09 PM	#97
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,205	Re: NOS '67-'72 GM Pickup Lock Set Crazy day today my brother, PP sent asap. I'll take a set. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

04-07-2014, 07:11 PM	#99
MidWest72C10 Registered User Join Date: Apr 2012 Location: San Diego,Ca/Moran,KS Posts: 62	Re: NOS '67-'72 GM Pickup Lock Set Leon be on the look out for my payment in paypal. Thanks again. Scott __________________ Scott Daily Driver:2010 Z71 Ext Cab Project:1972 C10 SWB

04-07-2014, 07:38 PM	#100
rwhite692 Registered User Join Date: Mar 2014 Location: Tracy California Posts: 98	Re: NOS '67-'72 GM Pickup Lock Set Hi Leon, Please add me to the list for a set! Thanks, Rob



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.