KS 1972 chevy C10 with a 4speed getting parted now - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

conman585 · 08-20-2014, 07:14 PM

Quote:

Originally Posted by teeitup

$25 plus shipping for the black frame tinted pass wing window. I'm not sure condition of rubber seal, I can look if interested? Thanks

I'm rebuilding mine and the bottom pivot is broken where the weld is. So I'm not too concerned about the quality of the rubber. In order to make shipping cheaper would you mind removing or sawzall-ing the division bar off right below the vent window? I only really need the metal window frame. Attached picture for clarification. Thanks [IMG]<a href="http://s612.photobucket.com/user/conman585/media/ventwindow.jpg.html" target="_blank"><img src="http://i612.photobucket.com/albums/tt201/conman585/ventwindow.jpg" border="0" alt=" photo ventwindow.jpg"/></a>[/IMG]

conman585 · 08-20-2014, 07:18 PM

**davem815** · 08-20-2014, 08:53 PM

I'll pass on the mirror. I need the below eye line where the bottom mounting point on the door is lower. I haven't started on the project, so mirrors were way ahead of the game anyway.
Dave

kcsa75 · 08-20-2014, 10:54 PM

Quote:

Originally Posted by teeitup

Willie, I have a few sets if your interested

I'm interested in the other parchment set with the scroll and trim. Would you take $30 for those as well? What would you take to get both parchment sets?

teeitup · 08-21-2014, 06:45 AM

JonnyC10, $17 shipped for one

conman585, I can cut that, I'll get quote tonight.

Davem815, no problem

Willie, sure $30 each set, but me finding a box big enough to ship might be hard

Thanks Randy

kcsa75 · 08-21-2014, 11:43 AM

Randy, I'll take both sets. PM sent.

*JonnyC10* · 08-21-2014, 11:45 AM

Ill pass. Just won a set of hinges on ebay this morning for $15 shipped for both. Thanks though.

Ozzy2013 · 08-21-2014, 12:02 PM

Got the steering column today thanks pleasure doing buisness with you!Oz

teeitup · 08-21-2014, 12:32 PM

Willie, I will get with you

JonnyC10, no problem, they basically gave them to you, going to cost them $12 shipping plus pal pal fees to get them to you

Oz, glad it got there safely

Thanks Randy

Brave71 · 08-21-2014, 01:26 PM

Randy, I need a few parts for my 71....left and right door latch and lock rods...2 e brake center to rear connectors...2 e brake eye hook rod things...the 2 front connector parts...2 brass front brake tees... One brass brake coupling ...3 brake hose retainer clips..1 clutch delete plate..2 thru the floor gas line grommets and would you have any good chrome door panel top trim pieces, shipped to 89015

**72peace** · 08-21-2014, 06:21 PM

Wasn't sure if i'd seen it go or not, but have you sold the bed, and if not is it solid and what are you asking? Planning on changing the wood.

Cheers,

Low_71 · 08-21-2014, 09:35 PM

How much for the upper alternator bracket shipped to 48371?

conman585 · 08-21-2014, 10:41 PM

Quote:

Originally Posted by teeitup

conman585, I can cut that, I'll get quote tonight.

Thanks Randy

Quote, for the hacked up vent window? I'm in no rush, just didn't want to get lost in the mix. Thanks

teeitup · 08-22-2014, 06:41 AM

Brave71, all I have is 72 door parts right now. I will look on the other stuff

72Peace, bed has some dents. Rear crossmember on bed floor is rusted. I had to cut top section of bed rail in one spot to get off the spare tire holder. $100 for bed

Low_71, sorry sold the alt brackets already

conman585, I will have quote tonight, sorry for delay

Thanks Randy

bobby204 · 08-22-2014, 10:10 AM

If you still have it how much for the gas pedal with cable and all mounting hardware including engine compartment shipped to 59901.Thanks Bobby

teeitup · 08-22-2014, 01:15 PM

$43 shipped for gas pedal setup complete, Thanks Randy

bobby204 · 08-22-2014, 02:14 PM

I will take it,send payment info.Bobby

Bobby Keeney
131 Beargrass Ln
Kalispell,MT 59901

71swb4x4 · 08-22-2014, 08:06 PM

Hey that truck came from close to me. Wonder how it got all the way down in Kansas?

teeitup · 08-22-2014, 09:22 PM

Bobby, I will mail it out Mon, Thanks

Shawn, I bought 5 trucsk for Hotfun, in York, Neb. He went up there and got it.

Thanks Randy

teeitup · 08-22-2014, 09:23 PM

Got some more parts off it finally, been way to hot out there to do anything

teeitup · 08-22-2014, 09:24 PM

21

teeitup · 08-22-2014, 09:25 PM

28

teeitup · 08-22-2014, 09:26 PM

33

teeitup · 08-22-2014, 09:26 PM

38

**invicta455** · 08-23-2014, 01:17 AM

How much for the shifter boot assembly and the shifter handle

08-20-2014, 07:18 PM	#77
conman585 Registered User Join Date: Dec 2006 Location: Midlothian, TX Posts: 87	Re: 1972 chevy C10 with a 4speed getting parted now

08-20-2014, 08:53 PM	#78
davem815 Senior Member Join Date: Jun 2013 Location: Warren, IN Posts: 313	Re: 1972 chevy C10 with a 4speed getting parted now I'll pass on the mirror. I need the below eye line where the bottom mounting point on the door is lower. I haven't started on the project, so mirrors were way ahead of the game anyway. Dave

08-21-2014, 06:45 AM	#80
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1972 chevy C10 with a 4speed getting parted now JonnyC10, $17 shipped for one conman585, I can cut that, I'll get quote tonight. Davem815, no problem Willie, sure $30 each set, but me finding a box big enough to ship might be hard Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-21-2014, 11:43 AM	#81
kcsa75 Registered User Join Date: Oct 2010 Location: Kansas City Posts: 3,590	Re: 1972 chevy C10 with a 4speed getting parted now Randy, I'll take both sets. PM sent. __________________ Willie Swamp Angel Truckers '72 C10 Highlander *People who blindly follow a GPS end up on television programs on The Weather Channel. Some survive, some don't.*

08-21-2014, 11:45 AM	#82
JonnyC10 Account Suspended Join Date: Jul 2014 Location: NH Posts: 280	Re: 1972 chevy C10 with a 4speed getting parted now Ill pass. Just won a set of hinges on ebay this morning for $15 shipped for both. Thanks though.

08-21-2014, 12:02 PM	#83
Ozzy2013 Registered User Join Date: Oct 2013 Location: Elkton Posts: 693	Re: 1972 chevy C10 with a 4speed getting parted now Got the steering column today thanks pleasure doing buisness with you!Oz

08-21-2014, 12:32 PM	#84
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1972 chevy C10 with a 4speed getting parted now Willie, I will get with you JonnyC10, no problem, they basically gave them to you, going to cost them $12 shipping plus pal pal fees to get them to you Oz, glad it got there safely Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-21-2014, 01:26 PM	#85
Brave71 Registered User Join Date: Sep 2013 Location: Henderson, NV Posts: 304	Re: 1972 chevy C10 with a 4speed getting parted now Randy, I need a few parts for my 71....left and right door latch and lock rods...2 e brake center to rear connectors...2 e brake eye hook rod things...the 2 front connector parts...2 brass front brake tees... One brass brake coupling ...3 brake hose retainer clips..1 clutch delete plate..2 thru the floor gas line grommets and would you have any good chrome door panel top trim pieces, shipped to 89015

08-21-2014, 06:21 PM	#86
72peace Senior Member Join Date: Jan 2011 Location: Bellevue, NE Posts: 712	Re: 1972 chevy C10 with a 4speed getting parted now Wasn't sure if i'd seen it go or not, but have you sold the bed, and if not is it solid and what are you asking? Planning on changing the wood. Cheers,

08-21-2014, 09:35 PM	#87
Low_71 Registered User Join Date: Sep 2013 Location: michigan Posts: 4	Re: 1972 chevy C10 with a 4speed getting parted now How much for the upper alternator bracket shipped to 48371?

08-22-2014, 06:41 AM	#89
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1972 chevy C10 with a 4speed getting parted now Brave71, all I have is 72 door parts right now. I will look on the other stuff 72Peace, bed has some dents. Rear crossmember on bed floor is rusted. I had to cut top section of bed rail in one spot to get off the spare tire holder. $100 for bed Low_71, sorry sold the alt brackets already conman585, I will have quote tonight, sorry for delay Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-22-2014, 10:10 AM	#90
bobby204 Registered User Join Date: Feb 2014 Location: Kalispell,MT Posts: 11	Re: 1972 chevy C10 with a 4speed getting parted now If you still have it how much for the gas pedal with cable and all mounting hardware including engine compartment shipped to 59901.Thanks Bobby

08-22-2014, 01:15 PM	#91
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1972 chevy C10 with a 4speed getting parted now $43 shipped for gas pedal setup complete, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-22-2014, 02:14 PM	#92
bobby204 Registered User Join Date: Feb 2014 Location: Kalispell,MT Posts: 11	Re: 1972 chevy C10 with a 4speed getting parted now I will take it,send payment info.Bobby Bobby Keeney 131 Beargrass Ln Kalispell,MT 59901

08-22-2014, 08:06 PM	#93
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: 1972 chevy C10 with a 4speed getting parted now Hey that truck came from close to me. Wonder how it got all the way down in Kansas? __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.



Register or Log In To remove these advertisements.

08-22-2014, 09:22 PM	#94
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1972 chevy C10 with a 4speed getting parted now Bobby, I will mail it out Mon, Thanks Shawn, I bought 5 trucsk for Hotfun, in York, Neb. He went up there and got it. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-22-2014, 09:23 PM	#95
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1972 chevy C10 with a 4speed getting parted now Got some more parts off it finally, been way to hot out there to do anything Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-22-2014, 09:24 PM	#96
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1972 chevy C10 with a 4speed getting parted now 21 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-22-2014, 09:25 PM	#97
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1972 chevy C10 with a 4speed getting parted now 28 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-22-2014, 09:26 PM	#98
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1972 chevy C10 with a 4speed getting parted now 33 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-23-2014, 01:17 AM	#100
invicta455 Senior Member Join Date: May 2009 Location: greensboro north carolina Posts: 531	Re: 1972 chevy C10 with a 4speed getting parted now How much for the shifter boot assembly and the shifter handle

Register or Log In To remove these advertisements.