Nik's 62 build - Page 40 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Palf70Step** · 11-19-2016, 08:14 AM

**Advanced Design** · 11-19-2016, 08:58 AM

Quote:

Originally Posted by 62stepside longbox

I welded a nut on to the diff cover and put a short bolt through it with an o ring for making oil filling much easier.

I agree too, this is clever. Never seen it done before...thanks for the share!

**TJ's Chevy** · 11-19-2016, 12:09 PM

Time to go into business. lol

62stepside longbox · 11-19-2016, 06:47 PM

Quote:

Originally Posted by Grizz1963

Clever Clever.

Yes, thanks rian

Quote:

Originally Posted by Palf70Step

Quote:

Originally Posted by Advanced Design

I agree too, this is clever. Never seen it done before...thanks for the share!

Thanks Doug, just a little something I thought up.

Quote:

Originally Posted by TJ's Chevy

Time to go into business. lol

Maybe I'll have to see about that lol

62stepside longbox · 11-23-2016, 01:29 AM

Still making decent progress here, just not many pictures. Just today I installed a new pinion seal.

AJCK87 · 11-24-2016, 11:32 AM

Beauty Nik! Keep plugging away at her.

**Palf70Step** · 11-24-2016, 02:27 PM

Burnouts be coming soon!

62stepside longbox · 11-24-2016, 10:14 PM

Quote:

Originally Posted by AJCK87

Beauty Nik! Keep plugging away at her.

Thanks Anthony

Quote:

Originally Posted by Palf70Step

Burnouts be coming soon!

Oh yeah, I just might have to do them on a wet wooden bridge since I only have the six

Just the other day I purchased some hubcaps from a good friend in comox bc, I believe they are 67-69 camaro/Nova/Chevelle. They should be arriving in the mail soon.

rusty76 · 11-24-2016, 10:59 PM

Great job on the truck. Things are looking nice.

62stepside longbox · 11-29-2016, 08:34 PM

Quote:

Originally Posted by rusty76

Great job on the truck. Things are looking nice.

Thanks rusty.

Today at school I used the metal lathe to make some pieces for my hydraulic clutch linkage. I turned down some roundstock and used my tap and die set to thread them. The threaded hole on this piece attaches to the clutch master cylinder and the threaded stick-out part threads into the rod end. The lock nut is to make adjustments and tighten it so it won't come out of adjustment

62stepside longbox · 11-29-2016, 08:38 PM

And the top piece here is threaded all the way through and attaches to the pedal and pivots on the rod end

62stepside longbox · 11-29-2016, 08:43 PM

And here it is together

62stepside longbox · 11-29-2016, 08:44 PM

I then installed the clutch master cylinder for the final time

62stepside longbox · 11-29-2016, 08:50 PM

Here is the linkage all Hooked up and adjusted

62stepside longbox · 11-29-2016, 08:57 PM

While I was doing this I decided to adjust the clutch pedal to a height that I like, it's about inline with the brake pedal (The angle of the picture makes it look out of line). I still need to add a pedal stop pad to prevent the master cylinder from bottoming out and also add a clutch return spring.

65sub · 11-30-2016, 01:42 PM

As usual Nik, very nice work. Good looking hub caps too

scoot_mcgrute · 11-30-2016, 03:27 PM

Quote:

Originally Posted by 62stepside longbox

Oh yeah, I just might have to do them on a wet wooden bridge since I only have the six

That T5 will make awesome 6 banger burnouts! This was on wet pavement but it does it just as easy on dry

https://www.youtube.com/watch?v=VynJxi-w8AM

**Advanced Design** · 11-30-2016, 10:41 PM

Nice machine work! Sure beats buying a part.

**TJ's Chevy** · 12-01-2016, 12:08 AM

Good job bud.

62stepside longbox · 12-02-2016, 12:47 AM

Quote:

Originally Posted by 65sub

As usual Nik, very nice work. Good looking hub caps too

Thanks Dale, and the hubcaps were only $40!

Quote:

Originally Posted by scoot_mcgrute

That T5 will make awesome 6 banger burnouts! This was on wet pavement but it does it just as easy on dry

https://www.youtube.com/watch?v=VynJxi-w8AM

Thanks Scott, that's awesome, can't wait until the spring or summer when I have it up and running!

Quote:

Originally Posted by Advanced Design

Nice machine work! Sure beats buying a part.

Thanks Doug, I couldn't agree more.

Quote:

Originally Posted by TJ's Chevy

Good job bud.

Thanks tj😀

62stepside longbox · 12-04-2016, 08:56 PM

On Friday I finally got the rear end all finished and buttoned up and I brought it home from the school shop. All it needs is a little paint on the cover and the adjusters to be set correctly

62stepside longbox · 12-04-2016, 09:21 PM

And today I did some drilling on the frame and got the power steering box mocked up with the adaptor plate

62stepside longbox · 12-04-2016, 09:23 PM

Another pic

62stepside longbox · 12-04-2016, 09:26 PM

And a close up of where I had to redrill the box so that all of the holes lined up with the frame. Now all I need to do is weld the boxed portion of the frame back in place and buy some longer bolts

**66ChevyMax** · 12-07-2016, 11:17 AM

Great work on the clutch hook-up

11-19-2016, 08:14 AM	#976
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,754	Re: A 15 year old's project. Rusty 62 stepside __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-19-2016, 12:09 PM	#978
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: A 15 year old's project. Rusty 62 stepside Time to go into business. lol __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

11-23-2016, 01:29 AM	#980
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside Still making decent progress here, just not many pictures. Just today I installed a new pinion seal. Attached Images __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

11-24-2016, 11:32 AM	#981
AJCK87 Registered User Join Date: Apr 2015 Location: Port McNeill, B.C. Posts: 464	Re: A 15 year old's project. Rusty 62 stepside Beauty Nik! Keep plugging away at her.

11-24-2016, 02:27 PM	#982
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,754	Re: A 15 year old's project. Rusty 62 stepside Burnouts be coming soon! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-24-2016, 10:59 PM	#984
rusty76 Registered User Join Date: Sep 2012 Location: Midway, NC Posts: 3,275	Re: A 15 year old's project. Rusty 62 stepside Great job on the truck. Things are looking nice. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC

11-29-2016, 08:38 PM	#986
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside And the top piece here is threaded all the way through and attaches to the pedal and pivots on the rod end Attached Images

11-29-2016, 08:43 PM	#987
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside And here it is together Attached Images

11-29-2016, 08:44 PM	#988
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside I then installed the clutch master cylinder for the final time Attached Images

11-29-2016, 08:50 PM	#989
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside Here is the linkage all Hooked up and adjusted Attached Images

11-29-2016, 08:57 PM	#990
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside While I was doing this I decided to adjust the clutch pedal to a height that I like, it's about inline with the brake pedal (The angle of the picture makes it look out of line). I still need to add a pedal stop pad to prevent the master cylinder from bottoming out and also add a clutch return spring. Attached Images __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

11-30-2016, 01:42 PM	#991
65sub Registered User Join Date: Jun 2014 Location: dresden , ontario Posts: 628	Re: A 15 year old's project. Rusty 62 stepside As usual Nik, very nice work. Good looking hub caps too __________________ Dale ---------------- My suburban's Twisted Little Sister http://67-72chevytrucks.com/vboard/s...d.php?t=655167

11-30-2016, 10:41 PM	#993
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,017	Re: A 15 year old's project. Rusty 62 stepside Nice machine work! Sure beats buying a part. __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

12-01-2016, 12:08 AM	#994
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: A 15 year old's project. Rusty 62 stepside Good job bud. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

12-04-2016, 08:56 PM	#996
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside On Friday I finally got the rear end all finished and buttoned up and I brought it home from the school shop. All it needs is a little paint on the cover and the adjusters to be set correctly Attached Images



Register or Log In To remove these advertisements.

12-04-2016, 09:21 PM	#997
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside And today I did some drilling on the frame and got the power steering box mocked up with the adaptor plate Attached Images

12-04-2016, 09:23 PM	#998
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside Another pic Attached Images

12-04-2016, 09:26 PM	#999
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside And a close up of where I had to redrill the box so that all of the holes lined up with the frame. Now all I need to do is weld the boxed portion of the frame back in place and buy some longer bolts Attached Images __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

12-07-2016, 11:17 AM	#1000
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: A 15 year old's project. Rusty 62 stepside Great work on the clutch hook-up __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

Register or Log In To remove these advertisements.