1967 C10 Custom Big Window - Page 42 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**kev2809** · 12-22-2010, 12:39 AM

lol

any progress david?

Slick67 · 12-23-2010, 02:50 PM

Quote:

Originally Posted by kev2809

lol

any progress david?

Doh... I knew someone would notice. Been lazy on the truck progress, have not even put my chrome replacement master cylinder on. Should be going by there today. But no promises on work actually being done!!!

67chevy1series · 12-23-2010, 02:52 PM

good i think a pair of parchment buddy buckets could replaec those seats just athought since you said you were going to do something different for the interior

68 TT · 12-23-2010, 03:11 PM

Quote:

Originally Posted by 67chevy1series

good i think a pair of parchment buddy buckets could replaec those seats just athought since you said you were going to do something different for the interior

A nice twist would be to recover them in the orange & white hounds tooth upholstery like the 69 Camaro pace cars used. It may clash with the exterior color but going to the black & white hounds tooth would fix that.

I'm sure you could get a sample of the orange & white to see how it looks.

Slick67 · 12-24-2010, 06:04 PM

Quote:

Originally Posted by 67chevy1series

good i think a pair of parchment buddy buckets could replaec those seats just athought since you said you were going to do something different for the interior

I will be using the seat that's in my pics, bu covered in a light tan ultraleather. The doorpanels and a custom panel behind the seat will be getting the same treatment.

Quote:

Originally Posted by 68 TT

A nice twist would be to recover them in the orange & white hounds tooth upholstery like the 69 Camaro pace cars used. It may clash with the exterior color but going to the black & white hounds tooth would fix that.

I'm sure you could get a sample of the orange & white to see how it looks.

I really put some thought into this a while back and you are right about the clash.......it just didn't work with the color. I even purchased some 72 Blazer seats to do it with then sold them and went the direction I am going now. Just like you, I liked the Camaro throw back to houndstooth since I have the 69 327 emblems on my air cleaner cover. Too bad the idea didn't work.......

67chevy1series · 12-24-2010, 06:18 PM

well have you been driving her lately

Slick67 · 12-25-2010, 11:12 PM

Quote:

Originally Posted by 67chevy1series

well have you been driving her lately

Nope, still waiting to get the exhaust done. It sux not being able to get her out and cruise, but gotta treat her right!

67chevy1series · 12-25-2010, 11:30 PM

ya mine doesnt have exhaust either

powerman324 · 12-29-2010, 01:01 AM

what brand of of airbags did you use and were did you get it from

Slick67 · 12-29-2010, 01:28 AM

Quote:

Originally Posted by powerman324

what brand of of airbags did you use and were did you get it from

They are Slam Specialties 2600's with Blitzluft valves, actually found them brand new on Craigslist along with everything else I needed to install them. Yep I got lucky on that score. Start with ***************** they seem to be a great place to start.

powerman324 · 01-02-2011, 03:40 PM

did you have to make your own brackets or did you buy them

Slick67 · 01-03-2011, 06:58 PM

Quote:

Originally Posted by powerman324

did you have to make your own brackets or did you buy them

The only brackets that are needed are the ones that bolt to the crossmember and those came with the kit. Everything else is bolt on.

Slick67 · 01-07-2011, 01:16 AM

I see alot of people asking what the cheapest way to lower a spring equipped truck and I must say......take out the springs!!! A quick pic from the good ole days. October 2008. Check out how the mufflers were ran.
Name: 674.jpg
Views: 1144
Size: 67.8 KB

shiner2001 · 01-07-2011, 01:45 AM

Quote:

Originally Posted by Slick67

I see alot of people asking what the cheapest way to lower a spring equipped truck and I must say......take out the springs!!! A quick pic from the good ole days. October 2008. Check out how the mufflers were ran.
Attachment 677613

Hood hinges are out of adjustment just a touch...

67chevy1series · 01-07-2011, 02:47 AM

well that is why they bent the cab flaps

68 Quad C10 · 01-07-2011, 10:47 AM

Quote:

Originally Posted by shiner2001

Hood hinges are out of adjustment just a touch...

only a little

my67chevytruck · 01-07-2011, 01:19 PM

do you have it road worthy yet David?

Slick67 · 01-07-2011, 10:58 PM

Quote:

Originally Posted by shiner2001

Hood hinges are out of adjustment just a touch...

Hahahaha

Quote:

Originally Posted by 67chevy1series

well that is why they bent the cab flaps

I wanted to run them that way too, so I cut the flaps completely.

Quote:

Originally Posted by 68 Quad C10

only a little

Just a hair.

Quote:

Originally Posted by my67chevytruck

do you have it road worthy yet David?

I wish I could say yes, but fundage is short. I have not even put on my new chrome m/c and I've had it for over a month and a half. It is getting discouraging.

67chevy1series · 01-07-2011, 11:20 PM

hows the interor and AC comin

Slick67 · 01-08-2011, 01:16 AM

Quote:

Originally Posted by 67chevy1series

hows the interor and AC comin

Well.......it's not. I have not done a thing, but that will be changing soon. Patience!!

67chevy1series · 01-08-2011, 01:21 AM

oh well when you get it goin remember to take pictures!

mattboe91 · 01-09-2011, 12:06 AM

what all did you have to do to mount your front bags did you fab something or did you buy the plates and are those the factory spindle or lowering ones?

powerman324 · 01-09-2011, 12:23 AM

did you have any clearance problems with the wheels and the wheel tubs and what size wheels and tires do you have

Slick67 · 01-09-2011, 01:47 AM

Quote:

Originally Posted by mattboe91

what all did you have to do to mount your front bags did you fab something or did you buy the plates and are those the factory spindle or lowering ones?

I have the plates and that is really all ya need for the front end also Western 2.5 drop spindles to get it down a little more. Oh yeah, I cut about 3/8 of an inch off of the cup and that dropped it another 1.5 inches too.

Quote:

Originally Posted by powerman324

did you have any clearance problems with the wheels and the wheel tubs and what size wheels and tires do you have

No clearance issues on the front with 20X8.5 rims and 35 series tires with the width of your liking. If ya do a 4 link in the rear you will be happier with the outcome. I have a mini-notch too. I am running the factory rear suspension with an adjustable trac-bar with a 70 rear end and still have about 5/8 of an inch clearance with 22X10s with a 35 series tire. The backspacing should be 5.5 on the rear if I am not mistaken cause I am running a spacer on the rear. Here is a pic of the rear clearance airred out.
Name: tireclearance.jpg
Views: 1010
Size: 47.9 KB

Name: tireclearance.jpg
Views: 1010
Size: 47.9 KB

Name: SAM_0088.jpg
Views: 1008
Size: 43.6 KB

powerman324 · 01-09-2011, 04:28 PM

how do you like the rims have you had to replace any of them and are there they very strong rims. i am look at getting a set like yours but i am afraid that 20s and 22s with low profile tires that the rims will bend if you hit a crack on the road

12-22-2010, 12:39 AM	#1026
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,143	Re: 1967 C10 Custom Big Window lol any progress david? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

12-23-2010, 02:52 PM	#1028
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 C10 Custom Big Window good i think a pair of parchment buddy buckets could replaec those seats just athought since you said you were going to do something different for the interior

12-24-2010, 06:18 PM	#1031
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 C10 Custom Big Window well have you been driving her lately

12-25-2010, 11:30 PM	#1033
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 C10 Custom Big Window ya mine doesnt have exhaust either

12-29-2010, 01:01 AM	#1034
powerman324 Registered User Join Date: Jul 2010 Location: winnipeg Posts: 7	Re: 1967 C10 Custom Big Window what brand of of airbags did you use and were did you get it from

01-02-2011, 03:40 PM	#1036
powerman324 Registered User Join Date: Jul 2010 Location: winnipeg Posts: 7	Re: 1967 C10 Custom Big Window did you have to make your own brackets or did you buy them

01-07-2011, 01:16 AM	#1038
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: 1967 C10 Custom Big Window I see alot of people asking what the cheapest way to lower a spring equipped truck and I must say......take out the springs!!! A quick pic from the good ole days. October 2008. Check out how the mufflers were ran. __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

01-07-2011, 02:47 AM	#1040
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 C10 Custom Big Window well that is why they bent the cab flaps

01-07-2011, 01:19 PM	#1042
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: 1967 C10 Custom Big Window do you have it road worthy yet David? __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

01-07-2011, 11:20 PM	#1044
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 C10 Custom Big Window hows the interor and AC comin

01-08-2011, 01:21 AM	#1046
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 C10 Custom Big Window oh well when you get it goin remember to take pictures!

01-09-2011, 12:06 AM	#1047
mattboe91 Registered User Join Date: Jan 2011 Location: Rogers, MN Posts: 17	Re: 1967 C10 Custom Big Window what all did you have to do to mount your front bags did you fab something or did you buy the plates and are those the factory spindle or lowering ones?

01-09-2011, 12:23 AM	#1048
powerman324 Registered User Join Date: Jul 2010 Location: winnipeg Posts: 7	Re: 1967 C10 Custom Big Window did you have any clearance problems with the wheels and the wheel tubs and what size wheels and tires do you have

01-09-2011, 04:28 PM	#1050
powerman324 Registered User Join Date: Jul 2010 Location: winnipeg Posts: 7	Re: 1967 C10 Custom Big Window how do you like the rims have you had to replace any of them and are there they very strong rims. i am look at getting a set like yours but i am afraid that 20s and 22s with low profile tires that the rims will bend if you hit a crack on the road Last edited by powerman324; 01-09-2011 at 08:57 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.