** YOUNG FRANKENSTEIN ** The truck Chevrolet should have built. - Page 42 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

drewskiren · 03-26-2011, 12:22 PM

Quote:

Originally Posted by 67cheby

would a glazing putty work better in your low spots and then primer???

Just about, but they are not quite that low. I trust the stickability of paint more anyway. I do have some "icing" type glaze that I might try in the first stage of my next panels.

VA72C10 · 03-26-2011, 12:24 PM

Quote:

Originally Posted by drewskiren

Just about, but they are not quite that low. I trust the stickability of paint more anyway. I do have some "icing" type glaze that I might try in the first stage of my next panels.

That icing works great. Especially for filling over last minute things that show in the primer and those annoying tiny pinholes that can show up from time to time.

Wipe it on, wipe it off basically. let it dry for a bit, sand it, and it's ready for sealer and paint. (not that you don't know that Drew

)

drewskiren · 03-26-2011, 12:37 PM

Well, I had to break down and bring in a hired gun, John Harden. A whiz body man from my friends body shop. The original cab that I used the rear of had been rear ended once and both sides or the cab back had dents from the bed smacking it. I had worked them a while, but to keep progress moving along and to keep everyone here on the board happy, I got John to come by today and whip them into shape. It might have taken me weeks to get them right - if then - and I knew ya'll would not stand for 3 weeks of pictures of me struggling.

On another note, the doors are ready now and I'm working on the fenders to get them done today too.

**67cheby** · 03-26-2011, 12:38 PM

i have painted probably 10 vehicles in my life , but that was back when i was young , had a shop, and alot more time......... what i am saying is i know just about enough to be dangerous , and not enough to be GOOD !! lol

butternut1972 · 03-26-2011, 12:45 PM

Truck is looking great. Do we get some color pics this weekend?

**FRENCHBLUE72** · 03-26-2011, 12:47 PM

So if your bringin in hired guns to keep us happy what are you gonna do for an oncore after this project to keep us happy???? Just kiddin man glad to see ya out in the garage making headway..

drewskiren · 03-26-2011, 12:59 PM

I just ran across this free video series online and thought I would share. They know a heck of a lot more than I do, so take anything I say with a grain of salt. http://www.ehow.com/videos-on_5135_c...paint-car.html

drewskiren · 03-26-2011, 01:57 PM

Quote:

Originally Posted by butternut1972

Truck is looking great. Do we get some color pics this weekend?

I don't have any sealer to spray on to keep all the primers and bondo and icing from acting up so we will have to wait on the blue. I did the hood since it was all clean metal with only epoxy primer on it.

jbclassix · 03-26-2011, 03:39 PM

really enjoying learning about getting straight panels!

drewskiren · 03-26-2011, 08:49 PM

Saturday night picture time

John was able to work both sides and the welded door. Right side is ready for a final skim coat as well as the welded side. The drivers cab corner will take bondo work and then icing.

I found 2 high spots and 1 low spot on the top edge of the fender. A hammer blow and a little glaze will take care of them.

I went ahead and ordered all my body side moldings so I could position them and then decide where the paint line should be. There is also a FAQ on the board showing where ALL the moldings go that someone scanned from the GM assembly manual.

VA72C10 · 03-26-2011, 08:59 PM

Looks good! Have a link to that post on the moldings?

devsrevs · 03-26-2011, 09:22 PM

totally original one off, love it bra!

drewskiren · 03-27-2011, 12:21 AM

Quote:

Originally Posted by VA72C10

Looks good! Have a link to that post on the moldings?

Here you go, http://67-72chevytrucks.com/vboard/s...d.php?t=221881

drewskiren · 03-27-2011, 12:23 AM

I also have been researching my headliner all night and think I have a start. I won't be working on it anytime soon though.

VA72C10 · 03-27-2011, 12:26 AM

Quote:

Originally Posted by drewskiren

Here you go, http://67-72chevytrucks.com/vboard/s...d.php?t=221881

Thanks!

**thelonerife** · 03-27-2011, 12:29 AM

Drew I'm gonna bring my GMC down for a weekend so you can paint it for me. Your like so fast! LOL

VA72C10 · 03-27-2011, 12:33 AM

So are you using suburban molding for the front and shortbed for the bed?

drewskiren · 03-27-2011, 11:40 AM

Quote:

Originally Posted by VA72C10

So are you using suburban molding for the front and shortbed for the bed?

Yep sir.

Upper molding is a little tricky though since burb upper molding is totally different than a truck. I'll be making some custom pieces out of longer truck ones for the rear doors.

**Hart_Rod** · 03-27-2011, 12:12 PM

Quote:

Originally Posted by drewskiren

Yep sir.

Upper molding is a little tricky though since burb upper molding is totally different than a truck. I'll be making some custom pieces out of longer truck ones for the rear doors.

Give James a call at Mar-K. I had him make the pieces you're talking about. Look in my suburban thread I think I have some pictures there..

drewskiren · 03-27-2011, 09:48 PM

I know I'm jumping around here a little, but it was just so tempting I couldn't resist.

**FRENCHBLUE72** · 03-27-2011, 09:56 PM

How does that eastwood sound now that you have some stuck down does it have a nice solid thud or is it tin sounding still...??

drewskiren · 03-27-2011, 10:15 PM

Quote:

Originally Posted by FRENCHBLUE72

How does that eastwood sound now that you have some stuck down does it have a nice solid thud or is it tin sounding still...??

It is like lead now. Love it!!

extremesounds13 · 03-28-2011, 01:31 AM

Looks great you are doing a phenomenal job and super quick too!!

VA72C10 · 03-28-2011, 01:34 AM

Nice work!

drewskiren · 03-28-2011, 01:45 AM

OK, check that off the list.

03-26-2011, 12:37 PM	#1028
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Well, I had to break down and bring in a hired gun, John Harden. A whiz body man from my friends body shop. The original cab that I used the rear of had been rear ended once and both sides or the cab back had dents from the bed smacking it. I had worked them a while, but to keep progress moving along and to keep everyone here on the board happy, I got John to come by today and whip them into shape. It might have taken me weeks to get them right - if then - and I knew ya'll would not stand for 3 weeks of pictures of me struggling. On another note, the doors are ready now and I'm working on the fenders to get them done today too. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife! Last edited by drewskiren; 03-27-2011 at 11:45 AM.

03-26-2011, 12:38 PM	#1029
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. i have painted probably 10 vehicles in my life , but that was back when i was young , had a shop, and alot more time......... what i am saying is i know just about enough to be dangerous , and not enough to be GOOD !! lol __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-26-2011, 12:45 PM	#1030
butternut1972 Registered User Join Date: May 2009 Location: longview,wa Posts: 1,094	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Truck is looking great. Do we get some color pics this weekend? __________________ 1972 GMC (PROJECT LONG OVERDUE) 1998 SWB 4WD

03-26-2011, 12:47 PM	#1031
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. So if your bringin in hired guns to keep us happy what are you gonna do for an oncore after this project to keep us happy???? Just kiddin man glad to see ya out in the garage making headway.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-26-2011, 12:59 PM	#1032
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. I just ran across this free video series online and thought I would share. They know a heck of a lot more than I do, so take anything I say with a grain of salt. http://www.ehow.com/videos-on_5135_c...paint-car.html __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

03-26-2011, 03:39 PM	#1034
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. really enjoying learning about getting straight panels! __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

03-26-2011, 08:49 PM	#1035
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Saturday night picture time John was able to work both sides and the welded door. Right side is ready for a final skim coat as well as the welded side. The drivers cab corner will take bondo work and then icing. I found 2 high spots and 1 low spot on the top edge of the fender. A hammer blow and a little glaze will take care of them. I went ahead and ordered all my body side moldings so I could position them and then decide where the paint line should be. There is also a FAQ on the board showing where ALL the moldings go that someone scanned from the GM assembly manual. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife! Last edited by drewskiren; 03-26-2011 at 08:49 PM.

03-26-2011, 08:59 PM	#1036
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Looks good! Have a link to that post on the moldings? __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-26-2011, 09:22 PM	#1037
devsrevs Registered User Join Date: Apr 2010 Location: Santa Rosa, CA Posts: 22	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. totally original one off, love it bra!

03-27-2011, 12:23 AM	#1039
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. I also have been researching my headliner all night and think I have a start. I won't be working on it anytime soon though. __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

03-27-2011, 12:29 AM	#1041
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Drew I'm gonna bring my GMC down for a weekend so you can paint it for me. Your like so fast! LOL __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

03-27-2011, 12:33 AM	#1042
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. So are you using suburban molding for the front and shortbed for the bed? __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-27-2011, 09:48 PM	#1045
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. I know I'm jumping around here a little, but it was just so tempting I couldn't resist. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

03-27-2011, 09:56 PM	#1046
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. How does that eastwood sound now that you have some stuck down does it have a nice solid thud or is it tin sounding still...?? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-28-2011, 01:31 AM	#1048
extremesounds13 Registered User Join Date: Jun 2009 Location: Idaho Falls Idaho Posts: 131	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Looks great you are doing a phenomenal job and super quick too!!



Register or Log In To remove these advertisements.

03-28-2011, 01:34 AM	#1049
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Nice work! __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-28-2011, 01:45 AM	#1050
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. OK, check that off the list. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

Register or Log In To remove these advertisements.