Project "What was I Thinking" 68 SWB - Page 45 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bennett68C10 · 05-19-2013, 10:23 AM

Quote:

Originally Posted by ddubbs

Truck is looking killer!!! Keep up the awesome work. Don't sweat the spindles. The holes are tapered so you are only really drilling a 1/4" of the spindle. Cake walk compared to the stuff you've done already.
Posted via Mobile Device

Thanks, I'm having a hard time finding the reaming bit to drill them out. I guess my problem is I really don't know what to use. I guess I can just get a 5/8" bit to do it too.

Quote:

Originally Posted by Rusbuilt

Uhh I'm pretty sure I saw some update photos on Facebook!

You caught me, i'll post them up in a sec

Bennett68C10 · 05-19-2013, 10:25 AM

Didn't get much progress done yesterday but I did get my Intros mounted up. I taped up the lips to help keep them protected, I think I might tape the whole face of the rim.

Bennett68C10 · 05-19-2013, 10:30 AM

And here is the money shot. It was sitting on the tranny pan which was stopping it from going down that last inch in the front. I have a deep tranny pan and may have to go back to a stock pan. I still need to install the correct motor mounts and bolt the motor and tranny down so I won't know exactly what needs to be done until next weekend after I work on it a little more.

jmking9 · 05-19-2013, 10:55 AM

Looks great!

luckyss · 05-19-2013, 11:20 AM

Looking sweet
Posted via Mobile Device

ddubbs · 05-19-2013, 01:13 PM

Keith you don't need a reamer bit to drill the spindles. You use a drill bit because you are installing a bolt into the spindle. If you we're putting a tie rod in then you would need the tapered hole. Hope that helps you out.

Posted via Mobile Device
Posted via Mobile Device

Rusbuilt · 05-19-2013, 02:42 PM

Killin it!

RRC · 05-19-2013, 06:59 PM

Posted via Mobile Device Liking the money shot

I can't wait to get mine to that stage!!! Good work Keith!!!
Posted via Mobile Device

Bennett68C10 · 05-19-2013, 10:43 PM

Quote:

Originally Posted by jmking9

Looks great!

Thanks

Quote:

Originally Posted by luckyss

Looking sweet
Posted via Mobile Device

Thanks

Quote:

Originally Posted by ddubbs

Keith you don't need a reamer bit to drill the spindles. You use a drill bit because you are installing a bolt into the spindle. If you we're putting a tie rod in then you would need the tapered hole. Hope that helps you out.

Posted via Mobile Device
Posted via Mobile Device

Thanks for the input, just don't want to screw it up and drill it crooked or something. Think I'll just get a 5/8 bit with a good amount of oil and give it a try.

Quote:

Originally Posted by Rusbuilt

Killin it!

Thanks Rus

Quote:

Originally Posted by RRC

Posted via Mobile Device Liking the money shot

I can't wait to get mine to that stage!!! Good work Keith!!!
Posted via Mobile Device

Thanks Russ, something tells me you will be at this stage very soon.
Posted via Mobile Device

VA72C10 · 05-19-2013, 10:57 PM

Looks killer cool!

Fattback · 05-19-2013, 11:15 PM

So glad you decided to keep your wheels and tires

Looks great

Rob
Posted via Mobile Device

Bennett68C10 · 05-20-2013, 08:06 AM

Quote:

Originally Posted by VA72C10

Looks killer cool!

Thanks

Quote:

Originally Posted by Fattback

So glad you decided to keep your wheels and tires

Looks great

Rob
Posted via Mobile Device

Thanks Rob, I'm happy I kept them too. I think they look really really good
Posted via Mobile Device

shawno72 · 05-20-2013, 08:09 AM

Looks awesome Kieth, keep up the good work.

502ms · 05-20-2013, 08:12 AM

I love it. The red truck was awesome too....what wheels were those?
Posted via Mobile Device

Bennett68C10 · 05-20-2013, 09:52 AM

Quote:

Originally Posted by shawno72

Looks awesome Kieth, keep up the good work.

Thanks Shawn, I have a few more things to do to be done with the suspension but should be done in a couple of weeks so I can run the fuel and brake lines and reconfigure my exhaust. Then hopefully it will be ready to drop the cab on.

Quote:

Originally Posted by 502ms

I love it. The red truck was awesome too....what wheels were those?
Posted via Mobile Device

Thanks, the wheels on the red truck are Centerline Archer II. The red truck is forsale again in South Carolina. Wish I had the money to buy it back, I would just drop the body on my Porterbuilt frame.
Posted via Mobile Device

knomadd · 05-20-2013, 11:13 AM

Damn that looks good! I'd love to go that low, I'm just not willing to lose my bed to do it.

Bennett68C10 · 05-20-2013, 03:29 PM

Quote:

Originally Posted by knomadd

Damn that looks good! I'd love to go that low, I'm just not willing to lose my bed to do it.

I hear you on that, at first I was just going to go with the Mild rear dropmember so that I still had some bed left after raising the floor 5" but then I figured might as well go all the way down. I'm still undecided on what I want to do with the bed floor.
Posted via Mobile Device

**superflysteiny** · 05-21-2013, 02:30 PM

Looken good

Bennett68C10 · 05-21-2013, 08:06 PM

Quote:

Originally Posted by superflysteiny

Looken good

Thanks Eric
Posted via Mobile Device

raull · 05-22-2013, 09:01 PM

you ve come a long way !!!! looking sick !!!!

Bennett68C10 · 05-22-2013, 10:11 PM

Quote:

Originally Posted by raull

you ve come a long way !!!! looking sick !!!!

Thanks Raul
Posted via Mobile Device

TXPinstriper · 05-22-2013, 10:55 PM

Very nice bro !!

n2billet · 05-23-2013, 05:49 AM

Very Nice indeed!

**CC69Rat** · 05-23-2013, 07:41 AM

Dead sexy ... wow.
Posted via Mobile Device

Bennett68C10 · 05-23-2013, 08:08 AM

Quote:

Originally Posted by TXPinstriper

Very nice bro !!

Quote:

Originally Posted by n2billet

Very Nice indeed!

Quote:

Originally Posted by CC69Rat

Dead sexy ... wow.
Posted via Mobile Device

Thanks guys for all the positive feedback. All of your guys builds are inspiration for mine. I can't wait to get some body panels on it to see what it really looks like.
Posted via Mobile Device

05-19-2013, 10:25 AM	#1102
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "What was I Thinking" 68 SWB Didn't get much progress done yesterday but I did get my Intros mounted up. I taped up the lips to help keep them protected, I think I might tape the whole face of the rim. Attached Images __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10 Last edited by Bennett68C10; 06-03-2013 at 08:36 AM.

05-19-2013, 10:30 AM	#1103
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "What was I Thinking" 68 SWB And here is the money shot. It was sitting on the tranny pan which was stopping it from going down that last inch in the front. I have a deep tranny pan and may have to go back to a stock pan. I still need to install the correct motor mounts and bolt the motor and tranny down so I won't know exactly what needs to be done until next weekend after I work on it a little more. Attached Images __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

05-19-2013, 10:55 AM	#1104
jmking9 Registered User Join Date: Sep 2006 Location: Riverton KS Posts: 832	Re: Project "What was I Thinking" 68 SWB Looks great! __________________ 1970 SWB Build

05-19-2013, 11:20 AM	#1105
luckyss Registered User Join Date: Nov 2003 Location: Jersey Posts: 123	Re: Project "What was I Thinking" 68 SWB Looking sweet Posted via Mobile Device

05-19-2013, 01:13 PM	#1106
ddubbs Registered User Join Date: Feb 2011 Location: Alaska Posts: 461	Re: Project "What was I Thinking" 68 SWB Keith you don't need a reamer bit to drill the spindles. You use a drill bit because you are installing a bolt into the spindle. If you we're putting a tie rod in then you would need the tapered hole. Hope that helps you out. Posted via Mobile Device Posted via Mobile Device __________________ LIFTED OR LOW THE ONLY WAY TO GO!!!! Check out my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=517346 Projects 56 Chevy pickup Porterbuilt FR/RR dropmembers

05-19-2013, 02:42 PM	#1107
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Project "What was I Thinking" 68 SWB Killin it! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

05-19-2013, 06:59 PM	#1108
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Project "What was I Thinking" 68 SWB Posted via Mobile Device Liking the money shot I can't wait to get mine to that stage!!! Good work Keith!!! Posted via Mobile Device __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

05-19-2013, 10:57 PM	#1110
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project "What was I Thinking" 68 SWB Looks killer cool! __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-19-2013, 11:15 PM	#1111
Fattback Registered User Join Date: Sep 2010 Location: Oklahoma Posts: 287	Re: Project "What was I Thinking" 68 SWB So glad you decided to keep your wheels and tires Looks great Rob Posted via Mobile Device __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=578272 https://www.instagram.com/fb_garage/

05-20-2013, 08:09 AM	#1113
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Project "What was I Thinking" 68 SWB Looks awesome Kieth, keep up the good work. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

05-20-2013, 08:12 AM	#1114
502ms Registered User Join Date: Aug 2011 Location: Atlanta, GA Posts: 1,523	Re: Project "What was I Thinking" 68 SWB I love it. The red truck was awesome too....what wheels were those? Posted via Mobile Device __________________ Best Regards, Leon M. Instagram: @TheDirtyDianah Bagged \| 6.0L LS \| T-56 (6-Speed Manual) \| Turbo Burnout/Rolling Video: Chevy C10 Stepside 6.0L LSx & 6-Speed Manual

05-20-2013, 11:13 AM	#1116
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: Project "What was I Thinking" 68 SWB Damn that looks good! I'd love to go that low, I'm just not willing to lose my bed to do it. __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

05-21-2013, 02:30 PM	#1118
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Project "What was I Thinking" 68 SWB Looken good __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

05-22-2013, 09:01 PM	#1120
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: Project "What was I Thinking" 68 SWB you ve come a long way !!!! looking sick !!!! __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

05-22-2013, 10:55 PM	#1122
TXPinstriper Registered User Join Date: Jan 2012 Location: Santa Fe, Texas Posts: 352	Re: Project "What was I Thinking" 68 SWB Very nice bro !! __________________ Stocker to Rocker http://67-72chevytrucks.com/vboard/s...=1#post5148380 "THE GRADUATE" http://67-72chevytrucks.com/vboard/s...08#post5763408 JohnnyC http://instagram.com/texpinstriper/



Register or Log In To remove these advertisements.

05-23-2013, 05:49 AM	#1123
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: Project "What was I Thinking" 68 SWB Very Nice indeed! __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold

05-23-2013, 07:41 AM	#1124
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,206	Re: Project "What was I Thinking" 68 SWB Dead sexy ... wow. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

Register or Log In To remove these advertisements.