Project Vitamin C-10 - Page 46 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

scotts62 · 05-18-2009, 12:58 PM

Quote:

Originally Posted by Alan's Classic

[COLOR="Blue"]
Sexier than socks on a rooster

We have a rooster from hell out at mom and dads he has 3" spurs, youd be the man if you could catch him and put socks on him! He fights back

4dranch · 05-18-2009, 01:15 PM

Quote:

Originally Posted by scotts62

We have a rooster from hell out at mom and dads he has 3" spurs, youd be the man if you could catch him and put socks on him! He fights back

Alan you have no one to blame but yourself on this jacking if it takes off

"Sexier than socks on a rooster"
That's just too funny there.

70 Suburban · 05-18-2009, 01:26 PM

Hate to say it but if the clear is fresh you could sand it blend the color back then reclear.. That spot in ther rear may be hard to see when blended.

scotts62 · 05-18-2009, 02:33 PM

Have you figured out the run situation yet Alan? You going to take a lot of tedious wet sanding and try and not go through or sand it down and re clear?

aggie91 · 05-18-2009, 02:39 PM

Man, Allan, the more I read your thread the more impressed I am with your skills. Your painting is outstanding. I had a run similar to yours in a door, luckily, I could use a block to sand it our and keep it level. That one is in a tricky spot since the panel is concaved. I know that you will make it right!

Really digging your colors. You have insired me to work on mine again and to get my shop started. I think I asked before, but what size is your home shop?

Alan's Classic · 05-18-2009, 03:27 PM

Quote:

Originally Posted by scotts62

We have a rooster from hell out at mom and dads he has 3" spurs, youd be the man if you could catch him and put socks on him! He fights back

Quote:

Originally Posted by 4dranch

Alan you have no one to blame but yourself on this jacking if it takes off

"Sexier than socks on a rooster"
That's just too funny there.

Quote:

Originally Posted by 70 Suburban

Hate to say it but if the clear is fresh you could sand it blend the color back then reclear.. That spot in ther rear may be hard to see when blended.

Quote:

Originally Posted by scotts62

Have you figured out the run situation yet Alan? You going to take a lot of tedious wet sanding and try and not go through or sand it down and re clear?

I'm still at work, so no nothing has been done yet. I'll work on it tonight after the kiddies go too bed. I'm going to try my damdest not too go thru, but if it happens at least I tried. I will take my time with it. I'll up date tonight with pics of how I use the putty.

Quote:

Originally Posted by aggie91

Man, Allan, the more I read your thread the more impressed I am with your skills. Your painting is outstanding. I had a run similar to yours in a door, luckily, I could use a block to sand it our and keep it level. That one is in a tricky spot since the panel is concaved. I know that you will make it right!

Really digging your colors. You have insired me to work on mine again and to get my shop started. I think I asked before, but what size is your home shop?

Thanks aggie, glad I can impress someone.

My shop is a 30x30

70 Suburban · 05-18-2009, 04:14 PM

I see yours at 30x30 and mine seems so small at 25x30

Strodder · 05-18-2009, 08:24 PM

Allan, I've been gone since Friday. Man your getting some work done.

It's coming out really good. I like the color combo even more now, Fish Eyes, and runs suck. Don't they have a tool to shave off runs? Then color sand them out.

Alan's Classic · 05-18-2009, 11:38 PM

Quote:

Originally Posted by 70 Suburban

I see yours at 30x30 and mine seems so small at 25x30

No matter how big your work area is it will never be big enough.

Quote:

Originally Posted by Strodder

Allan, I've been gone since Friday. Man your getting some work done.

It's coming out really good. I like the color combo even more now, Fish Eyes, and runs suck. Don't they have a tool to shave off runs? Then color sand them out.

Thanks Dennis, they do have a tool like that. I don't have one, but have used one.

Ok here is the process I went thru in sanding out a run. It took me about an hour taking my time. In that amount of time I could have sanded and recleared. Then there is the materials cost. I've still got 3 more to work out. What would really suck is sand thru on the last one. With this process it can still happen, but not as much.

This is what I used. there are other products that can be used.

Apply it sparingly. It takes along time to sand it off.

This a small block I cut from a large paint stir stick. I used 1000 grit and went over it with 2000 prior to buffing.

Sanding progress

Mini air powered buffer

Buffed but still needs a little more.

protrash64 · 05-18-2009, 11:51 PM

I had a container of that in my hand after our pm's. I think the glaze is what I really need to use. Thats a good use for it cutting those runs down.

TimE · 05-19-2009, 05:44 AM

Great work Alan. It's little tricks like these that help edjumacate us all on paint/body. Keep it up!

joe231 · 05-19-2009, 07:25 AM

keep it up!!

I saw a trick on tv to use a razor blade perpendicular to the surface and scrape the run down then you can sand to smooth it out, then buff.... any thoughts?

scotts62 · 05-19-2009, 07:39 AM

I have one of these, it works pretty good but ill have to try the glaze sometime.
Run Razor

joe231 · 05-19-2009, 08:01 AM

Quote:

Uses a calibrated dial to obtain accuracy of .001 inch cuts

looks like a plastic screw to me

70 Suburban · 05-19-2009, 08:11 AM

Quote:

Originally Posted by joe231

keep it up!!

I saw a trick on tv to use a razor blade perpendicular to the surface and scrape the run down then you can sand to smooth it out, then buff.... any thoughts?

i just used this method on my bike tank. works but still have to sand

Strodder · 05-19-2009, 10:46 AM

Allan, that's a slick trick. Thanks for sharing.

Alan's Classic · 05-19-2009, 11:39 AM

Quote:

Originally Posted by protrash64

I had a container of that in my hand after our pm's. I think the glaze is what I really need to use. Thats a good use for it cutting those runs down.

Quote:

Originally Posted by TimE

Great work Alan. It's little tricks like these that help edjumacate us all on paint/body. Keep it up!

I'll do my best.

Quote:

Originally Posted by joe231

keep it up!!

I saw a trick on tv to use a razor blade perpendicular to the surface and scrape the run down then you can sand to smooth it out, then buff.... any thoughts?

If you have a steady hand and the clear is cured good it can be done. Have to watch the corners of the blade. I've done it before and was nervous the whole time. If the clear is not fully cured it can roll up the clear and take out a chunk. A convex curve would be a little easier to learn on if the need ever arises.

Quote:

Originally Posted by Strodder

Allan, that's a slick trick. Thanks for sharing.

Hey ya'll, how 'bout some rep points for that one. Yes I'm begging.

Out of about 300 views a day on average one person gave out rep points for that tip.

scotts62 · 05-19-2009, 01:10 PM

Quote:

Originally Posted by Alan's Classic

Hey ya'll, how 'bout some rep points for that one. Yes I'm begging.

Out of about 300 views a day on average one person gave out rep points for that tip.

It was me i think because it wont let me give you any more points

scotts62 · 05-19-2009, 01:11 PM

Quote:

Originally Posted by joe231

looks like a plastic screw to me

Mine is similar to it but not exactly, thats probably to hold the razor.. mine isnt that fancy the blade just snaps in

ruffrida2005 · 05-19-2009, 01:26 PM

Joe I saw that tip done on power block, not sure which show it was, but looked usefull. I think Alans would be a lot better for the novice like we all are. Keep up the tips and tricks Alan

ruffrida2005 · 05-19-2009, 01:28 PM

I try to get you as much rep points as I can Alan but it says I have to spread some around before I can give you some more. Who wants some!

Strodder · 05-19-2009, 02:07 PM

What the hell is a Rep Point??

joe231 · 05-19-2009, 04:33 PM

Quote:

Originally Posted by ruffrida2005

I try to get you as much rep points as I can Alan but it says I have to spread some around before I can give you some more. Who wants some!

same here...
I try to give them out regularly, but sometimes I forget

Dennis,
Look here
REP POINT LINKY

Alan's Classic · 05-19-2009, 06:24 PM

Quote:

Originally Posted by ruffrida2005

Joe I saw that tip done on power block, not sure which show it was, but looked usefull. I think Alans would be a lot better for the novice like we all are. Keep up the tips and tricks Alan

Quote:

Originally Posted by ruffrida2005

I try to get you as much rep points as I can Alan but it says I have to spread some around before I can give you some more. Who wants some!

I hear ya brother. It happens to me alot also.

Quote:

Originally Posted by Strodder

What the hell is a Rep Point??

Quote:

Originally Posted by joe231

same here...
I try to give them out regularly, but sometimes I forget

Dennis,
Look here
REP POINT LINKY

I figured you'd bring your post about rep points back too the top.

4dranch · 05-19-2009, 06:54 PM

Alan,
I know what your saying about the rep points...but we can only spread so many during the 24 hours or only so many on a thread...
So, take it from someone who can't wait for your updates on your rig and I hope I'm not speaking for myself but I enjoy and learn so much from your post. rep points or not......

So it's not the rep points, it's the veiws to your thread you should be aware of. over 53,000, that's way more than Joe and his steak...

I meen we are all still waiting on the update on the cabinets....

Thanks Alan

05-18-2009, 01:26 PM	#1128
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: My 1965 build thread Hate to say it but if the clear is fresh you could sand it blend the color back then reclear.. That spot in ther rear may be hard to see when blended. __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)

05-18-2009, 02:33 PM	#1129
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 1965 build thread Have you figured out the run situation yet Alan? You going to take a lot of tedious wet sanding and try and not go through or sand it down and re clear? __________________ Scott 93 crew cab build Project 62

05-18-2009, 02:39 PM	#1130
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: My 1965 build thread Man, Allan, the more I read your thread the more impressed I am with your skills. Your painting is outstanding. I had a run similar to yours in a door, luckily, I could use a block to sand it our and keep it level. That one is in a tricky spot since the panel is concaved. I know that you will make it right! Really digging your colors. You have insired me to work on mine again and to get my shop started. I think I asked before, but what size is your home shop? __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

05-18-2009, 04:14 PM	#1132
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: My 1965 build thread I see yours at 30x30 and mine seems so small at 25x30 __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)

05-18-2009, 08:24 PM	#1133
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: My 1965 build thread Allan, I've been gone since Friday. Man your getting some work done. It's coming out really good. I like the color combo even more now, Fish Eyes, and runs suck. Don't they have a tool to shave off runs? Then color sand them out. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT* Last edited by Strodder; 05-18-2009 at 08:24 PM.

05-18-2009, 11:51 PM	#1135
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: My 1965 build thread I had a container of that in my hand after our pm's. I think the glaze is what I really need to use. Thats a good use for it cutting those runs down. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

05-19-2009, 05:44 AM	#1136
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: My 1965 build thread Great work Alan. It's little tricks like these that help edjumacate us all on paint/body. Keep it up! __________________ Just hopin' I live long enough to finish something!!!

05-19-2009, 07:25 AM	#1137
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 1965 build thread keep it up!! I saw a trick on tv to use a razor blade perpendicular to the surface and scrape the run down then you can sand to smooth it out, then buff.... any thoughts? __________________ *CHEVY ONLY* Last edited by joe231; 05-19-2009 at 07:27 AM.

05-19-2009, 07:39 AM	#1138
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 1965 build thread I have one of these, it works pretty good but ill have to try the glaze sometime. Run Razor __________________ Scott 93 crew cab build Project 62

05-19-2009, 10:46 AM	#1141
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: My 1965 build thread Allan, that's a slick trick. Thanks for sharing. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

05-19-2009, 01:26 PM	#1145
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: My 1965 build thread Joe I saw that tip done on power block, not sure which show it was, but looked usefull. I think Alans would be a lot better for the novice like we all are. Keep up the tips and tricks Alan __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

05-19-2009, 01:28 PM	#1146
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: My 1965 build thread I try to get you as much rep points as I can Alan but it says I have to spread some around before I can give you some more. Who wants some! __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

05-19-2009, 02:07 PM	#1147
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: My 1965 build thread What the hell is a Rep Point?? __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

05-19-2009, 06:54 PM	#1150
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: My 1965 build thread Alan, I know what your saying about the rep points...but we can only spread so many during the 24 hours or only so many on a thread... So, take it from someone who can't wait for your updates on your rig and I hope I'm not speaking for myself but I enjoy and learn so much from your post. rep points or not...... So it's not the rep points, it's the veiws to your thread you should be aware of. over 53,000, that's way more than Joe and his steak... I meen we are all still waiting on the update on the cabinets.... Thanks Alan __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q Last edited by 4dranch; 05-19-2009 at 06:58 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.