Tootsie build for my mother with cancer - Page 49 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chvy2NV · 10-17-2012, 08:02 PM

Wow dude!!! As stated before. My dentist sucks!!!!

Say it ain't so brother.. This will not be your last build.
Posted via Mobile Device

NewType72 · 10-18-2012, 12:31 AM

those lines are just ridiculously cool looking great bending skills

mosesburb · 10-18-2012, 12:39 AM

Truck looks sick man. Any updates on your Mom??

**superflysteiny** · 10-18-2012, 12:58 AM

Thanks guys glad you like it. My mom is getting around well. Still using a walker but getting better everyday. Got a call from the Dr today and they stated that cancer was skin cancer that started on her leg. They are going to biopsy the lymph nodes on the other side to make sure she is clear of cancer. So looks like we may have dodged a bullet only time will tell. Thank you for asking
Posted via Mobile Device

nuke1 · 10-18-2012, 01:05 AM

Send my regards to your mom, she must be one tough lady!! Glad she is doing better, I can only imagine how hard it must be for all of you! And btw, the truck is looking great

**superflysteiny** · 10-20-2012, 10:45 PM

Quote:

Originally Posted by nuke1

Send my regards to your mom, she must be one tough lady!! Glad she is doing better, I can only imagine how hard it must be for all of you! And btw, the truck is looking great

I will and thank you
Posted via Mobile Device

**superflysteiny** · 10-22-2012, 11:45 AM

Ok so Jimmy and I started the brake lines and air lines last week. The air lines are all -4an fittings 1/4 inch stainless and the brake lines are 3/16 stainless with -3an fittings. I used single billet specialties clams and the double clamps are from earls. let me know what you guys think.

**superflysteiny** · 10-22-2012, 11:48 AM

Texas Pugh · 10-22-2012, 11:49 AM

Really nice. Great job.

**superflysteiny** · 10-22-2012, 11:51 AM

Thanks man we are trying. My brother in law Jimmy is a lot better a bending these then I am.

**CC69Rat** · 10-22-2012, 12:15 PM

Absolutely incredible man.. Wow.

**superflysteiny** · 10-22-2012, 12:21 PM

Thanks glad you like it

Zoomin · 10-22-2012, 12:27 PM

It's one thing to bend lines, but running lines in parallel like that demands a lot more precision because of the different bend radii, with different start/end points . Really cool to see that level of detail.

**superflysteiny** · 10-22-2012, 01:00 PM

If you look close on the air lines near the bag they don't look even but they are, I don't have the lines all tight and clamped. I have gone through two different 37 degree tube flaring tools. I am sick of this cheep Chinese crap tools. So I bought the mastercool flaring tool last night. I]t was pricey but worth it.

VA72C10 · 10-22-2012, 01:08 PM

very nice! So are the spindles the color the frame will end up?

big_al_71 · 10-22-2012, 01:38 PM

It does really look amazing. The attention to detail is exceptional.

**superflysteiny** · 10-22-2012, 02:00 PM

Quote:

Originally Posted by VA72C10

very nice! So are the spindles the color the frame will end up?

No it will be a little lighter and flatter then that. I was going to do it that color at first but I changed my mind.

Quote:

Originally Posted by big_al_71

It does really look amazing. The attention to detail is exceptional.

Thanks Al

flushdrew · 10-22-2012, 03:32 PM

such an incredible build. great work

Bennett68C10 · 10-22-2012, 03:50 PM

Wow all that line work looks incredible. Attention to detail is off the charts on this build. Wish I had the patience and know how to do that to mine, but it probably would have added another couple of years to my build

Posted via Mobile Device

Rusbuilt · 10-22-2012, 05:51 PM

The brake and air lines look great!! Nice work!

**superflysteiny** · 10-22-2012, 05:54 PM

Thanks guys

Dinos63 · 10-22-2012, 06:11 PM

Always top notch work! Man you are killin it!

gearys 5600 · 10-22-2012, 07:00 PM

NICE!! Keep it up..

**oldman3** · 10-22-2012, 07:14 PM

Beautiful job with the lines, looks amazing...Jim

Lolyin58 · 10-22-2012, 08:44 PM

Eric great eye as always. Your killing it Bro!!
Posted via Mobile Device

10-17-2012, 08:02 PM	#1201
Chvy2NV Registered User Join Date: Apr 2012 Location: So. Florida Posts: 873	Re: Tootsie build for my mother with cancer Wow dude!!! As stated before. My dentist sucks!!!! Say it ain't so brother.. This will not be your last build. Posted via Mobile Device

10-18-2012, 12:31 AM	#1202
NewType72 Registered User Join Date: Feb 2012 Location: turlock Posts: 2,177	Re: Tootsie build for my mother with cancer those lines are just ridiculously cool looking great bending skills __________________ Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721

10-18-2012, 12:39 AM	#1203
mosesburb I had a V-8 Join Date: May 2003 Location: Phoenix AZ Posts: 1,116	Re: Tootsie build for my mother with cancer Truck looks sick man. Any updates on your Mom?? __________________ 1972 K20 Suburban, 5.9L Cummins, Banks Power Pack, NV4500HD, NP205, H.A.D., D60/14FF ARB Link To Build: HERE.

10-18-2012, 12:58 AM	#1204
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Thanks guys glad you like it. My mom is getting around well. Still using a walker but getting better everyday. Got a call from the Dr today and they stated that cancer was skin cancer that started on her leg. They are going to biopsy the lymph nodes on the other side to make sure she is clear of cancer. So looks like we may have dodged a bullet only time will tell. Thank you for asking Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

10-18-2012, 01:05 AM	#1205
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: Tootsie build for my mother with cancer Send my regards to your mom, she must be one tough lady!! Glad she is doing better, I can only imagine how hard it must be for all of you! And btw, the truck is looking great __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

10-22-2012, 11:45 AM	#1207
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Ok so Jimmy and I started the brake lines and air lines last week. The air lines are all -4an fittings 1/4 inch stainless and the brake lines are 3/16 stainless with -3an fittings. I used single billet specialties clams and the double clamps are from earls. let me know what you guys think. __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

10-22-2012, 11:48 AM	#1208
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

10-22-2012, 11:49 AM	#1209
Texas Pugh Registered User Join Date: Jul 2012 Location: Midlothian, Texas Posts: 72	Re: Tootsie build for my mother with cancer Really nice. Great job.

10-22-2012, 11:51 AM	#1210
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Thanks man we are trying. My brother in law Jimmy is a lot better a bending these then I am. __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

10-22-2012, 12:15 PM	#1211
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,205	Re: Tootsie build for my mother with cancer Absolutely incredible man.. Wow. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

10-22-2012, 12:21 PM	#1212
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Thanks glad you like it __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

10-22-2012, 12:27 PM	#1213
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: Tootsie build for my mother with cancer It's one thing to bend lines, but running lines in parallel like that demands a lot more precision because of the different bend radii, with different start/end points . Really cool to see that level of detail. __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

10-22-2012, 01:00 PM	#1214
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer If you look close on the air lines near the bag they don't look even but they are, I don't have the lines all tight and clamped. I have gone through two different 37 degree tube flaring tools. I am sick of this cheep Chinese crap tools. So I bought the mastercool flaring tool last night. I]t was pricey but worth it. __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

10-22-2012, 01:08 PM	#1215
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Tootsie build for my mother with cancer very nice! So are the spindles the color the frame will end up? __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-22-2012, 01:38 PM	#1216
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Tootsie build for my mother with cancer It does really look amazing. The attention to detail is exceptional. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild



Register or Log In To remove these advertisements.

10-22-2012, 03:32 PM	#1218
flushdrew Registered User Join Date: Oct 2012 Location: Grand Island, Nebraska Posts: 22	Re: Tootsie build for my mother with cancer such an incredible build. great work

10-22-2012, 03:50 PM	#1219
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Tootsie build for my mother with cancer Wow all that line work looks incredible. Attention to detail is off the charts on this build. Wish I had the patience and know how to do that to mine, but it probably would have added another couple of years to my build Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

10-22-2012, 05:51 PM	#1220
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Tootsie build for my mother with cancer The brake and air lines look great!! Nice work! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

10-22-2012, 05:54 PM	#1221
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Thanks guys __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

10-22-2012, 06:11 PM	#1222
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: Tootsie build for my mother with cancer Always top notch work! Man you are killin it! __________________ CHEVY ONLY... Nothin Else !

10-22-2012, 07:00 PM	#1223
gearys 5600 Registered User Join Date: Mar 2010 Location: tulsa,ok Posts: 1,085	Re: Tootsie build for my mother with cancer NICE!! Keep it up.. __________________ MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=423629 1969 custom/10 swb--SOLD 1968 swb 50th anniv.--SOLD 1967 camaro ss/rs..LS-6-speed, 16-year long project 1956 chevy nomad 1955 chevy 210 2-dr sedan 1978 el-camino ss 1-owner

10-22-2012, 07:14 PM	#1224
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: Tootsie build for my mother with cancer Beautiful job with the lines, looks amazing...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

10-22-2012, 08:44 PM	#1225
Lolyin58 Registered User Join Date: Mar 2008 Location: Calgary,Alberta,Canada Posts: 372	Re: Tootsie build for my mother with cancer Eric great eye as always. Your killing it Bro!! Posted via Mobile Device __________________ Dino's 3rd annual Pre-ShowGit Down http://67-72chevytrucks.com/vboard/s...12#post5639812

Register or Log In To remove these advertisements.