KS 71 1/2 2wd cheyenne with AC getting parted soon - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1956cameo · 01-20-2011, 08:05 AM

The oil filler tube looks good. My shipping zip code is 77581. Thanks!

teeitup · 01-20-2011, 09:25 AM

Guys we ended up getting 9 inches of snow so it will be next week before I get to parting it more it looks like

Wootdog, Kerry, no problem

Dozerman, I'll get better pics this afternoon

OzarkTim, yes PB booster setup is still available, I should be able to get the lines your wanting too. Its unknown condition, truck was not running. $45 plus shipping with lines. I haven't got it off yet

Crig39, Carl, I have one guy ahead of you on AC stuff, I want to get it all off and check condition of everything.
I have one guy ahead of you on the intake, carb and kickdown, I'll pm him now and see if he still wants them. I only have a drivers side exhaust manifold its good $25, alt brackets are $20, PS pump/pulley/brackets/hoses is $40, all motor pullies $30. All plus shipping

Gene, I'll check it out for you this afternnon

themeskin, Eric, your 2nd on belts, haven't got it out yet. Inner grill I'll check out and price. I'll check out floor mat. And I'll check wheels

C1069, got your money for cig housing and wire. $65 shipped for column

1956Cameo, I'll get a quote this afternoon. Oil cap is a little loose, when I took off tube, I didn't take it off tube since it was so cold, I didn't want it to break

Thanks Randy

Ozark Tim · 01-20-2011, 01:58 PM

Whenever you can get to it I will take it. No rush
I'll wait to hear from you and we can exchange whatever info we need to.
Just send me a p.m. when you are ready to swap info.
Thanks,
Tim

teeitup · 01-20-2011, 07:52 PM

OzarkTim, I'll get with you. Thanks Randy

teeitup · 01-20-2011, 07:54 PM

trim pics for Gene, one small dent below cargo light, it need polished and would be fine. $20 plus shipping

teeitup · 01-20-2011, 07:57 PM

door panel trim pics for Gene, I think I have some in better shape, they may have some surface rust on top side where no one can see. $12 a pair plus shipping

teeitup · 01-20-2011, 07:59 PM

Grill pics for Eric, some surface rust on the one side see pic $20 plus shipping. The clip is upside down in these pics

teeitup · 01-20-2011, 08:01 PM

Wheel pics, I never seen any 71 on them around lugnuts

teeitup · 01-20-2011, 08:03 PM

pics for Dozerman, no pitting. Could use a blasting and painted

Gene · 01-20-2011, 09:42 PM

Quote:

Originally Posted by teeitup

door panel trim pics for Gene, I think I have some in better shape, they may have some surface rust on top side where no one can see. $12 a pair plus shipping

I'll take the rear window trim and the better of the door trim if you have it shipped to 74434?

teeitup · 01-20-2011, 09:45 PM

Gene, they are yours, it will be next week before I get out there to tear out the window, too cold and snowy here right now, supposed to be better next week. Thanks Randy

teeitup · 01-20-2011, 09:53 PM

pic for Drew

bkg61089 · 01-20-2011, 11:11 PM

Randy what shape are the seat belts and blue vents in?

Brian

Gene · 01-21-2011, 12:18 AM

Quote:

Originally Posted by teeitup

Gene, they are yours, it will be next week before I get out there to tear out the window, too cold and snowy here right now, supposed to be better next week. Thanks Randy

Totally understand it, we have 4 inches down here in Oklahoma south of you!

yad · 01-21-2011, 12:03 PM

Quote:

Originally Posted by teeitup

Yad, PS brackets without pump and pulley is $40 or with pump and pulley is $40. Motor pullies are $30, alt brackets are $20, so $90 plus shipping, shipping would be guessing $15. Thanks Randy

I'll take it. Can you send me a pm with payment info? Thanks! (With the pump by the way!)

teeitup · 01-21-2011, 01:39 PM

Brian, I have 2 guys ahead of you belts. On the vents you talking about outer Ac vents of defrost vents? I know defrost vents are bad, I need to check Ac vents

Gene, this weather is a pain for sure. I'll get you a quote later today

Yad, sorry never heard back from you yesterday so I sold all those already. I have other sets of alt brackets and another set of motor pullies off a 350 with AC but no more ps setups right now

Thanks Randy

1971shortstepide · 01-21-2011, 04:00 PM

Randy has any1 got in line for the side trim?

teeitup · 01-21-2011, 04:15 PM

Jay, trim is still available. What all are you needing? Thanks Randy

c1069 · 01-21-2011, 04:28 PM

I will pass on the steeering column at this time. thanks

RCbowtie69 · 01-21-2011, 09:31 PM

just checking ,how r the doors,or have u sold the doors & i may have miss it as i was checking the site.

teeitup · 01-21-2011, 10:01 PM

c1069, no problem
RCBowtie, sorry no shipping doors

Thanks Randy

teeitup · 01-21-2011, 10:07 PM

Here is what is SOLD for sure off this truck
cig housing and wiring
AM Radio and all brackets
intake
kickdown cable
carb
heat shield tube
PS pump and brackets
all motor pullies
driver side exhaust manifold
alt brackets
PB booster and brackets
side mirrors
oil filler tube

I have to get belts out, a few of you guys are asking about them
Also AC stuff out, smething a few asking about it

Its supposed to warm up next week so I'll get to part it out more

Thanks Randy

1956cameo · 01-21-2011, 10:35 PM

Payment sent!

themeskin · 01-22-2011, 12:28 AM

hi randy how much for engine removal hooks in pic qqqqqqq its next to the water neck i think theres one in front and one in back, and ash tray w glove door . thanks

teeitup · 01-22-2011, 10:38 AM

1956cameo, I'll get it shpped out to you

themeskin, engine hooks are $7 for pair. Ash tray $7, glove box door $10, plus shipping. Were you interested in the grill?

Thanks Randy

01-20-2011, 08:05 AM	#101
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: 71 1/2 2wd cheyenne with AC getting parted soon The oil filler tube looks good. My shipping zip code is 77581. Thanks! __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry

01-20-2011, 09:25 AM	#102
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd cheyenne with AC getting parted soon Guys we ended up getting 9 inches of snow so it will be next week before I get to parting it more it looks like Wootdog, Kerry, no problem Dozerman, I'll get better pics this afternoon OzarkTim, yes PB booster setup is still available, I should be able to get the lines your wanting too. Its unknown condition, truck was not running. $45 plus shipping with lines. I haven't got it off yet Crig39, Carl, I have one guy ahead of you on AC stuff, I want to get it all off and check condition of everything. I have one guy ahead of you on the intake, carb and kickdown, I'll pm him now and see if he still wants them. I only have a drivers side exhaust manifold its good $25, alt brackets are $20, PS pump/pulley/brackets/hoses is $40, all motor pullies $30. All plus shipping Gene, I'll check it out for you this afternnon themeskin, Eric, your 2nd on belts, haven't got it out yet. Inner grill I'll check out and price. I'll check out floor mat. And I'll check wheels C1069, got your money for cig housing and wire. $65 shipped for column 1956Cameo, I'll get a quote this afternoon. Oil cap is a little loose, when I took off tube, I didn't take it off tube since it was so cold, I didn't want it to break Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 01-20-2011 at 09:26 AM.

01-20-2011, 01:58 PM	#103
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	Re: 71 1/2 2wd cheyenne with AC getting parted soon Whenever you can get to it I will take it. No rush I'll wait to hear from you and we can exchange whatever info we need to. Just send me a p.m. when you are ready to swap info. Thanks, Tim

01-20-2011, 07:52 PM	#104
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd cheyenne with AC getting parted soon OzarkTim, I'll get with you. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-20-2011, 07:54 PM	#105
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd cheyenne with AC getting parted soon trim pics for Gene, one small dent below cargo light, it need polished and would be fine. $20 plus shipping Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-20-2011, 07:57 PM	#106
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd cheyenne with AC getting parted soon door panel trim pics for Gene, I think I have some in better shape, they may have some surface rust on top side where no one can see. $12 a pair plus shipping Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-20-2011, 07:59 PM	#107
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd cheyenne with AC getting parted soon Grill pics for Eric, some surface rust on the one side see pic $20 plus shipping. The clip is upside down in these pics Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 01-21-2011 at 12:20 AM.

01-20-2011, 08:01 PM	#108
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd cheyenne with AC getting parted soon Wheel pics, I never seen any 71 on them around lugnuts Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-20-2011, 08:03 PM	#109
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd cheyenne with AC getting parted soon pics for Dozerman, no pitting. Could use a blasting and painted Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-20-2011, 09:45 PM	#111
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd cheyenne with AC getting parted soon Gene, they are yours, it will be next week before I get out there to tear out the window, too cold and snowy here right now, supposed to be better next week. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-20-2011, 09:53 PM	#112
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd cheyenne with AC getting parted soon pic for Drew Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-20-2011, 11:11 PM	#113
bkg61089 Registered User Join Date: Jul 2009 Location: Five Points, TN Posts: 36	Re: 71 1/2 2wd cheyenne with AC getting parted soon Randy what shape are the seat belts and blue vents in? Brian

01-21-2011, 01:39 PM	#116
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd cheyenne with AC getting parted soon Brian, I have 2 guys ahead of you belts. On the vents you talking about outer Ac vents of defrost vents? I know defrost vents are bad, I need to check Ac vents Gene, this weather is a pain for sure. I'll get you a quote later today Yad, sorry never heard back from you yesterday so I sold all those already. I have other sets of alt brackets and another set of motor pullies off a 350 with AC but no more ps setups right now Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-21-2011, 04:00 PM	#117
1971shortstepide Registered User Join Date: Jul 2010 Location: Topeka KS Posts: 9	Re: 71 1/2 2wd cheyenne with AC getting parted soon Randy has any1 got in line for the side trim?

01-21-2011, 04:15 PM	#118
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd cheyenne with AC getting parted soon Jay, trim is still available. What all are you needing? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

01-21-2011, 04:28 PM	#119
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: 71 1/2 2wd cheyenne with AC getting parted soon I will pass on the steeering column at this time. thanks

01-21-2011, 09:31 PM	#120
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: 71 1/2 2wd cheyenne with AC getting parted soon just checking ,how r the doors,or have u sold the doors & i may have miss it as i was checking the site.

01-21-2011, 10:01 PM	#121
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd cheyenne with AC getting parted soon c1069, no problem RCBowtie, sorry no shipping doors Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-21-2011, 10:07 PM	#122
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd cheyenne with AC getting parted soon Here is what is SOLD for sure off this truck cig housing and wiring AM Radio and all brackets intake kickdown cable carb heat shield tube PS pump and brackets all motor pullies driver side exhaust manifold alt brackets PB booster and brackets side mirrors oil filler tube I have to get belts out, a few of you guys are asking about them Also AC stuff out, smething a few asking about it Its supposed to warm up next week so I'll get to part it out more Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-21-2011, 10:35 PM	#123
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: 71 1/2 2wd cheyenne with AC getting parted soon Payment sent! __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry

01-22-2011, 12:28 AM	#124
themeskin Registered User Join Date: Feb 2009 Location: el paso tx Posts: 125	Re: 71 1/2 2wd cheyenne with AC getting parted soon hi randy how much for engine removal hooks in pic qqqqqqq its next to the water neck i think theres one in front and one in back, and ash tray w glove door . thanks

01-22-2011, 10:38 AM	#125
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 1/2 2wd cheyenne with AC getting parted soon 1956cameo, I'll get it shpped out to you themeskin, engine hooks are $7 for pair. Ash tray $7, glove box door $10, plus shipping. Were you interested in the grill? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.