CA Parting a 1967 GMC 1/2 great parts to be had - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 05-27-2011, 07:57 PM

Tony, thanks for your time but I'm going to pass on wings shipping is a bit to high. Thanks Randy

ortegamotor · 05-27-2011, 09:19 PM

Quote:

Originally Posted by teeitup

Tony, thanks for your time but I'm going to pass on wings shipping is a bit to high. Thanks Randy

hey Randy, not a problem, i've adjusted the price to $120 shipped . thanks for looking. Tony

brian mac · 05-27-2011, 09:40 PM

Price on grill top bar shipped to 36027. Is the inside clean? surface rust is ok. prefer no rust holes.

teeitup · 05-27-2011, 09:42 PM

Tony, I'll give you the $120 shipped, I just said $35 you told me was too high for shipping. Let me know, Thanks Randy

2002yanks · 05-27-2011, 10:05 PM

still waiting for those door pics. lol

**michael bustamante** · 05-27-2011, 10:24 PM

What are you asking for the chrome rear view?
Posted via Mobile Device

**Chevy4Life** · 05-27-2011, 10:25 PM

Paypal sent for the Passenger side front fender.
Thanks!
Jay

teeitup · 05-27-2011, 10:32 PM

Tony, do I send you the $120? I have your paypal. Thanks Randy

**michael bustamante** · 05-27-2011, 10:47 PM

Quote:

Originally Posted by michael bustamante

does it have the radio? also hows the chrome trim above the inside door panals? oh and is the rearview mirror chrome?

Just waiting to hear object all this
Posted via Mobile Device

DesertCat · 05-27-2011, 11:05 PM

I'll get in line for that first chrome rearview mirror and both outside door handles.

Thanks

teeitup · 05-27-2011, 11:43 PM

I'm not sure why your screwing with me Tony but I don't appreciate it. your asking $100 for wings plus hipping, You told me $135 shipped for wings and I said shipping was too high, I do ship alot of stuff and know what shipping cost. I told you $22 shipping was what fed ex quoted. Then you say you lowered price to $120 for the next guy???? You also pm'd him to tell him $120. Why not sell them to me $120? I've been on this board a LONG time and don't screw with guys, I would hope you won't want to get a reputation for doing that.

**DREW67** · 05-27-2011, 11:51 PM

Tony, Tee-up is still up if he pass on the Vent Wings then I will take them.

Thanks,
Andrew

Ram-Man · 05-28-2011, 08:53 AM

Quote:

Originally Posted by Chevy4Life

Paypal sent for the Passenger side front fender.
Thanks!
Jay

Damn! Those are a tough find.

ortegamotor · 05-28-2011, 10:03 AM

Quote:

Originally Posted by 2002yanks

still waiting for those door pics. lol

hey Yanks , i'll get them today for sure. just real busy. sorry for the delay . Tony

ortegamotor · 05-28-2011, 10:11 AM

Quote:

Originally Posted by teeitup

I'm not sure why your screwing with me Tony but I don't appreciate it. your asking $100 for wings plus hipping, You told me $135 shipped for wings and I said shipping was too high, I do ship alot of stuff and know what shipping cost. I told you $22 shipping was what fed ex quoted. Then you say you lowered price to $120 for the next guy???? You also pm'd him to tell him $120. Why not sell them to me $120? I've been on this board a LONG time and don't screw with guys, I would hope you won't want to get a reputation for doing that.

hey Randy , i would not Screw with you , i was a little confused on the shipping on my end, sorry about any confusion . like i said in my PM to you , the widows are yours and the price is $120 shipped. Again thanks for your patience. you know Randy i Too have been on the Board for a while , but i just started selling and there is a bit of a learning curve to keep everything straight on my end. the last thing i will every do is screw with somebody. so again i'm sorry about the confusion . i will definitely honor our deal. and thanks again for your patience. that go's for you too Andrew. Tony

ortegamotor · 05-28-2011, 10:13 AM

Quote:

Originally Posted by michael bustamante

What are you asking for the chrome rear view?
Posted via Mobile Device

hey Mike, let me check back and see who asked me first about the rear view be for i pass it to you but i think you're next in line. Tony

ortegamotor · 05-28-2011, 10:18 AM

Quote:

Originally Posted by michael bustamante

Just waiting to hear object all this
Posted via Mobile Device

hey Mike , sorry no radio, but there is the chrome trim to hold the door palels on both sides . i will check their condition first but they are yours if you want them $20 shipped. just let me know . i'll try to get some pictures today when i'm out there. Tony

**michael bustamante** · 05-28-2011, 12:09 PM

Quote:

Originally Posted by ortegamotor

hey Mike, let me check back and see who asked me first about the rear view be for i pass it to you but i think you're next in line. Tony

Im pretty sure I asked first. And 20 sounds good for the panal trim pending the conditions. Thanks!
Posted via Mobile Device

ortegamotor · 05-28-2011, 12:43 PM

Here are some of the pictures you guys asked for. i hope this helps. there will be some more pictures coming . i also want to thank Frank/ Fesser who just came out and picked up his Blazer door. What a nice guy he is ,it was great doing business with you.

ortegamotor · 05-28-2011, 12:45 PM

here you guys go. Tony

ortegamotor · 05-28-2011, 12:47 PM

here are a few more.

ortegamotor · 05-28-2011, 12:50 PM

ere are a few more. hey Mike on those interior door trims. one is real nice and the other could use some steel wool. i would say they are decent driver quality . not show. but still nice. Tony

C/10 King · 05-28-2011, 03:12 PM

Now that feeding frenzy has slowed down,

Is the gauge cluster brown? if so is the price? and do all the gauges work? And maybe a close up photo, Thanks Rene

m6z · 05-28-2011, 03:26 PM

Quote:

Originally Posted by m6z

If the splash guard is in good shape I'd be interested as well. Please post pics of the bezels to comfirm condition.

Quote:

Originally Posted by ortegamotor

m6z, i'll get some pictures in a bit . Tony

I'm going to pass on the bezels, but still want the front grill. Also still interested in the top bar if it gets to me and the splash guard pending condition.

Thanks,

ortegamotor · 05-28-2011, 04:12 PM

Quote:

Originally Posted by C/10 King

Now that feeding frenzy has slowed down,

Is the gauge cluster brown? if so is the price? and do all the gauges work? And maybe a close up photo, Thanks Rene

hey Rene, i broke the corner or the bezel when i removed it. it was a flat grey color . Tony

05-27-2011, 07:57 PM	#101
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 1967 GMC 1/2 great parts to be had Tony, thanks for your time but I'm going to pass on wings shipping is a bit to high. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-27-2011, 09:40 PM	#103
brian mac Registered User Join Date: Dec 2008 Location: eufaula,alabama Posts: 198	Re: Parting a 1967 GMC 1/2 great parts to be had Price on grill top bar shipped to 36027. Is the inside clean? surface rust is ok. prefer no rust holes.

05-27-2011, 09:42 PM	#104
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 1967 GMC 1/2 great parts to be had Tony, I'll give you the $120 shipped, I just said $35 you told me was too high for shipping. Let me know, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 05-27-2011 at 09:42 PM.

05-27-2011, 10:05 PM	#105
2002yanks Registered User Join Date: Sep 2010 Location: Auburn NY Posts: 1,470	Re: Parting a 1967 GMC 1/2 great parts to be had still waiting for those door pics. lol

05-27-2011, 10:24 PM	#106
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,832	Re: Parting a 1967 GMC 1/2 great parts to be had What are you asking for the chrome rear view? Posted via Mobile Device __________________ 1967custom

05-27-2011, 10:25 PM	#107
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 750	Re: Parting a 1967 GMC 1/2 great parts to be had Paypal sent for the Passenger side front fender. Thanks! Jay

05-27-2011, 10:32 PM	#108
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 1967 GMC 1/2 great parts to be had Tony, do I send you the $120? I have your paypal. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-27-2011, 11:05 PM	#110
DesertCat Registered User Join Date: Mar 2011 Location: Valley of the Sunstroke, Arizona Posts: 1,210	Re: Parting a 1967 GMC 1/2 great parts to be had I'll get in line for that first chrome rearview mirror and both outside door handles. Thanks __________________ My build thread - Devastation and Reform http://67-72chevytrucks.com/vboard/s...d.php?t=567131

05-27-2011, 11:43 PM	#111
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 1967 GMC 1/2 great parts to be had I'm not sure why your screwing with me Tony but I don't appreciate it. your asking $100 for wings plus hipping, You told me $135 shipped for wings and I said shipping was too high, I do ship alot of stuff and know what shipping cost. I told you $22 shipping was what fed ex quoted. Then you say you lowered price to $120 for the next guy???? You also pm'd him to tell him $120. Why not sell them to me $120? I've been on this board a LONG time and don't screw with guys, I would hope you won't want to get a reputation for doing that. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-27-2011, 11:51 PM	#112
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,029	Re: Parting a 1967 GMC 1/2 great parts to be had Tony, Tee-up is still up if he pass on the Vent Wings then I will take them. Thanks, Andrew __________________ DREW67

05-28-2011, 12:43 PM	#119
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: Parting a 1967 GMC 1/2 great parts to be had Here are some of the pictures you guys asked for. i hope this helps. there will be some more pictures coming . i also want to thank Frank/ Fesser who just came out and picked up his Blazer door. What a nice guy he is ,it was great doing business with you. Attached Images

05-28-2011, 12:45 PM	#120
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: Parting a 1967 GMC 1/2 great parts to be had here you guys go. Tony Attached Images

05-28-2011, 12:47 PM	#121
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: Parting a 1967 GMC 1/2 great parts to be had here are a few more. Attached Images

05-28-2011, 12:50 PM	#122
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: Parting a 1967 GMC 1/2 great parts to be had ere are a few more. hey Mike on those interior door trims. one is real nice and the other could use some steel wool. i would say they are decent driver quality . not show. but still nice. Tony Attached Images

05-28-2011, 03:12 PM	#123
C/10 King Registered User Join Date: Feb 2009 Location: A****er, CA Posts: 5,594	Re: Parting a 1967 GMC 1/2 great parts to be had Now that feeding frenzy has slowed down, Is the gauge cluster brown? if so is the price? and do all the gauges work? And maybe a close up photo, Thanks Rene __________________ C/10 Rene 1966 Short Fleet "The Hag" 1967 CST Short Fleet "Dark Poly" 1971 Short Fleet 1970 Jimmy Custom 2 WD "Golden Ticket" 1972 Blazer 2 WD "Retro Blaze"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.