MN Now Parting 1967 Chevy CST!!!! - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Vintage Windmills · 07-04-2011, 10:32 AM

Quote:

Originally Posted by bobbymoss

Are you selling the steering colum and if so whats is the price to ship to 70538.

shifter lever is a little rust and mechanism is tight. Also doesn't inlcude shifter indicator (lens, indicator, lens housing). If you're still interested I'd do $34 shipped.

67chevy1series · 07-04-2011, 08:06 PM

heres the pic i was going to send through a pm

Vintage Windmills · 07-04-2011, 11:37 PM

Rick, ok sounds good, I will send those. Thanks,

jud

67chevy1series · 07-05-2011, 02:47 AM

thanks jud!just let me know if you can/if they tell you , when the latest these will arrive thanks!!!!

**ScottH** · 07-05-2011, 09:49 AM

I'll take the seat belts if still available.

Thanks
Scott

bestchevyfan · 07-05-2011, 01:50 PM

Hi, what are you asking for the auto column shipping to 35816 a business address. Thanks,buddy

Vintage Windmills · 07-05-2011, 02:14 PM

Rick, hoping to ship stuff tomorrow or thurs.

scottH- PM sent

bestchevyfan, see the post at the top of the page for details, same price for you in AL

67chevy1series · 07-05-2011, 02:16 PM

sounds good!

Vintage Windmills · 07-05-2011, 05:08 PM

All, I'm going to be adding some more parts, the vent windows and door panels both cleaned up fairly well.

mater63 · 07-05-2011, 06:29 PM

i need the pan hard bar BRACKET off the drivers side rear frame how much?
whess@gmail.com

**oldgold70c10** · 07-05-2011, 06:47 PM

I would still like to know about those vents....

**ScottH** · 07-05-2011, 07:33 PM

Payment sent on seat belts

Vintage Windmills · 07-05-2011, 09:51 PM

mater63, I am likely going to make a trailer out of the back end for hauling/storing firewood on my property so I should probably keep that.

oldgold70c10, see my new for sale ad for only the vent windows. I posted a new thread since many expressed interest previously and I indicated they weren't available.

scottH, here are pics of the alternator setup and other stuff

Vintage Windmills · 07-05-2011, 10:00 PM

More pics:

Door panels have some staining and tears on bottom edges. No rust on backside. $15 plus shipping

Steering wheel $20 shipped CONUS.

**ScottH** · 07-05-2011, 10:06 PM

Thanks for the pics. Would be interested in price on the alternator brackets as well as the exhaust manifolds if no cracks.

Scott

Vintage Windmills · 07-06-2011, 01:52 PM

Quote:

Originally Posted by ScottH

Thanks for the pics. Would be interested in price on the alternator brackets as well as the exhaust manifolds if no cracks.

Scott

Scott, Alternator brackets would be $20 shipped. Exhaust manifolds $89 shipped or $100 shipped with alt brackets.

**ScottH** · 07-06-2011, 02:17 PM

Jud, thanks.....sounds good, any chance u can get pics of the manifolds off?

Scott

Vintage Windmills · 07-06-2011, 03:52 PM

Quote:

Originally Posted by ScottH

Jud, thanks.....sounds good, any chance u can get pics of the manifolds off?

Scott

Scott,

Since they are a pain to remove, I probably won't pull them unless someone buys them. I'll inspect for cracks tonight and let you know. If they would end up having any defect, then I'd cancel sale or issue partial refund, whatever you would want to do. If you're interested assuming no issues, I'll look them over closely tonight.

**ScottH** · 07-06-2011, 03:56 PM

Sounds good to me, thanks!

Vintage Windmills · 07-06-2011, 11:18 PM

Scott, no cracks anywhere I can find. The driver side has the mechanism for circulation during warm up and that mechanism still moves. I will get the numbers off the intake manifold behind the carb.

Vintage Windmills · 07-06-2011, 11:24 PM

Pics of CST knobs nicely cleaned up.

Also some of lighter assembly with choice of style of lighter. Wiring that runs from fuse block to lighter is good and is included

see prices on page 1.

**ScottH** · 07-07-2011, 08:42 PM

Just wanted to let u know I found a set of manifolds local, so will be passing on them.

Would still like the alternator brackets and the intake piece.
Maybe u could ship them with the seat belts?

Thanks

Scott

Vintage Windmills · 07-07-2011, 09:33 PM

Scott, no problem. Thinking I'll keep the piece under the tstat housing since this engine may run but if you want the alternator brackets for additional $15 I'll throw them in with the belts. Belts are off and ready to ship tomorrow (friday). Please let me know tonight if you can.

Jud

**ScottH** · 07-07-2011, 10:18 PM

Jud, sounds good, can u pm me your PP account again?

thanks
Scott

Vintage Windmills · 07-13-2011, 10:02 AM

Still have the sway bar setup, guage cluster, CST knobs, lighter socket and long CST lighter, T400 linkage, and a buch of other parts. The t400 linkage looks really nice with no wear. Also the 3 core rad looks good. I'll be posting photos soon of the rest of the parts. Make an offer if you want.

07-04-2011, 08:06 PM	#102
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Now Parting 1967 Chevy CST!!!! heres the pic i was going to send through a pm Attached Images

07-04-2011, 11:37 PM	#103
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Now Parting 1967 Chevy CST!!!! Rick, ok sounds good, I will send those. Thanks, jud __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

07-05-2011, 02:47 AM	#104
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Now Parting 1967 Chevy CST!!!! thanks jud!just let me know if you can/if they tell you , when the latest these will arrive thanks!!!!

07-05-2011, 09:49 AM	#105
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Now Parting 1967 Chevy CST!!!! I'll take the seat belts if still available. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

07-05-2011, 01:50 PM	#106
bestchevyfan Registered User Join Date: Jun 2002 Location: new market, alabama Posts: 1,330	Re: Now Parting 1967 Chevy CST!!!! Hi, what are you asking for the auto column shipping to 35816 a business address. Thanks,buddy

07-05-2011, 02:14 PM	#107
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Now Parting 1967 Chevy CST!!!! Rick, hoping to ship stuff tomorrow or thurs. scottH- PM sent bestchevyfan, see the post at the top of the page for details, same price for you in AL __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

07-05-2011, 02:16 PM	#108
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Now Parting 1967 Chevy CST!!!! sounds good!

07-05-2011, 05:08 PM	#109
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Now Parting 1967 Chevy CST!!!! All, I'm going to be adding some more parts, the vent windows and door panels both cleaned up fairly well. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

07-05-2011, 06:29 PM	#110
mater63 Registered User Join Date: Mar 2010 Location: seymour in Posts: 76	Re: Now Parting 1967 Chevy CST!!!! i need the pan hard bar BRACKET off the drivers side rear frame how much? whess@gmail.com

07-05-2011, 06:47 PM	#111
oldgold70c10 Who's got steelies? Join Date: Feb 2006 Location: Morrison, Oklahoma Posts: 1,026	Re: Now Parting 1967 Chevy CST!!!! I would still like to know about those vents.... __________________ 1969 C10 LWB W/ 250 I6 & 3spd 1970 C10 with '67 small window cab, 68 front end, blue; 305/TH350, 3.08 limited slip rear end, manual brakes, power steering; & 4-wheel drums-My daily driver. 1975 Chevelle Malibu Classic Coupe 350/th350 mint green 1970 C20 Suburban 350/700R4 4.10 gearing green & white 1978 Big 10 Silverado 350/th350, working ac, 2 tone blue-My summer daily driver 1983 GMC 1500 Sierra 305/SM465 2.73 rear end How to add a trip odometer to your 67-72 stock speedometer How to rebuild your Q-Jet My Truck Page My Youtube Channel

07-05-2011, 07:33 PM	#112
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Now Parting 1967 Chevy CST!!!! Payment sent on seat belts __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

07-05-2011, 09:51 PM	#113
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Now Parting 1967 Chevy CST!!!! mater63, I am likely going to make a trailer out of the back end for hauling/storing firewood on my property so I should probably keep that. oldgold70c10, see my new for sale ad for only the vent windows. I posted a new thread since many expressed interest previously and I indicated they weren't available. scottH, here are pics of the alternator setup and other stuff Attached Images __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

07-05-2011, 10:00 PM	#114
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Now Parting 1967 Chevy CST!!!! More pics: Door panels have some staining and tears on bottom edges. No rust on backside. $15 plus shipping Steering wheel $20 shipped CONUS. Attached Images __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

07-05-2011, 10:06 PM	#115
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Now Parting 1967 Chevy CST!!!! Thanks for the pics. Would be interested in price on the alternator brackets as well as the exhaust manifolds if no cracks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

07-06-2011, 02:17 PM	#117
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Now Parting 1967 Chevy CST!!!! Jud, thanks.....sounds good, any chance u can get pics of the manifolds off? Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon



Register or Log In To remove these advertisements.

07-06-2011, 03:56 PM	#119
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Now Parting 1967 Chevy CST!!!! Sounds good to me, thanks! __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

07-06-2011, 11:18 PM	#120
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Now Parting 1967 Chevy CST!!!! Scott, no cracks anywhere I can find. The driver side has the mechanism for circulation during warm up and that mechanism still moves. I will get the numbers off the intake manifold behind the carb. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

07-06-2011, 11:24 PM	#121
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Now Parting 1967 Chevy CST!!!! Pics of CST knobs nicely cleaned up. Also some of lighter assembly with choice of style of lighter. Wiring that runs from fuse block to lighter is good and is included see prices on page 1. Attached Images __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

07-07-2011, 08:42 PM	#122
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Now Parting 1967 Chevy CST!!!! Just wanted to let u know I found a set of manifolds local, so will be passing on them. Would still like the alternator brackets and the intake piece. Maybe u could ship them with the seat belts? Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon Last edited by ScottH; 07-07-2011 at 08:52 PM.

07-07-2011, 09:33 PM	#123
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Now Parting 1967 Chevy CST!!!! Scott, no problem. Thinking I'll keep the piece under the tstat housing since this engine may run but if you want the alternator brackets for additional $15 I'll throw them in with the belts. Belts are off and ready to ship tomorrow (friday). Please let me know tonight if you can. Jud __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

07-07-2011, 10:18 PM	#124
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Now Parting 1967 Chevy CST!!!! Jud, sounds good, can u pm me your PP account again? thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

07-13-2011, 10:02 AM	#125
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Now Parting 1967 Chevy CST!!!! Still have the sway bar setup, guage cluster, CST knobs, lighter socket and long CST lighter, T400 linkage, and a buch of other parts. The t400 linkage looks really nice with no wear. Also the 3 core rad looks good. I'll be posting photos soon of the rest of the parts. Make an offer if you want. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

Register or Log In To remove these advertisements.