Project Thread:Nothin Normal - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

layedoutnoma · 12-09-2006, 01:25 PM

Well to update you haven't had much done on the truck but the motor is almost done. Need wheels bad, very bad so i can finish the 9" rear and then finish the bed. But heres some pics of the motor.. still needs to be finished and painted. some pics...

masterbeavis · 12-09-2006, 03:16 PM

Do you plan on running a scatter shield, and blanket? I Wouldn't want to read the "my clutch cut my feet off" thread. And where does the parachute go??

Looks like you are gunna have a sweet ride once you are finished giving up your first born for it.

layedoutnoma · 12-09-2006, 03:25 PM

Quote:

Originally Posted by masterbeavis

Do you plan on running a scatter shield, and blanket? I Wouldn't want to read the "my clutch cut my feet off" thread. And where does the parachute go??

Looks like you are gunna have a sweet ride once you are finished giving up your first born for it.

Yea definently running a blanket but will fit tight since i will sew it up myself, have to get some kevlar first cause i like my feet. ha

and yea first born won't be for a long while considering this is only one of a few major projects i have going on at this time...

layedoutnoma · 12-23-2006, 11:53 AM

Well got a few more updated pictures now and just time to put it on the engine stand and break it in and get it all tuned perfectly... enjoy th pics

pcmcobra · 12-23-2006, 12:14 PM

*****in!
Good luck dude, can't wait to see the finished product, gonna be sick.

68GMC454 · 12-23-2006, 12:57 PM

looks great...back on the frame pics i just noticed the 3 or 4 inch pipe running along side of the frame...are they there for structural suport,, or what..anyway keep up the great work..someday i figure i will see your stufff on the show circut..now mine will be there to,,but parked way out in the back forty,,but hey,,i got to get to the show some how..lol

pimperout · 12-23-2006, 05:08 PM

i dont... dont know what to say its so so beutifull

thats what i want for christmas

Trey` · 12-23-2006, 06:23 PM

Awesome truck, also saw it on SSM. Budnik, Colorado Customs, and B.A.D (Billet Accesories Direct) are the only places I know of that build a rim over 10 inches wide. I had mine built by B.A.D they are 20x13 for my '00 GMC. They were the most reasonable and I liked their wheel design ( Maulers). They did not make the Mickey Thompson tires when I got mine built or I would have gone wider. Maybe on the next project, if I ever finish the ones I have. Love to see some more pics, keep up the good work.

watahyahknow · 12-23-2006, 09:05 PM

how mush boost youre going to run ?
i was thinking on putting a 383 with vortec in my truck in the far future (thats after i make it big and win the lotery jackpot)

pat · 12-23-2006, 11:32 PM

OMG... I think this is my favorite truck on the whole board right now.
Thats awesome

phipp13 · 12-23-2006, 11:54 PM

With A Bbc ,lenco,and A Chute Your A Pro Mod! Please Post More Pics Along The Way. Gents That Is True Love. Merry Christmas To All !

layedoutnoma · 12-30-2006, 09:56 AM

Quote:

Originally Posted by 68GMC454

looks great...back on the frame pics i just noticed the 3 or 4 inch pipe running along side of the frame...are they there for structural suport,, or what..

those are for support but are there for my exhaust to run through. i will have cutouts at the front of the system and then a full exhaust routed out the back

layedoutnoma · 12-30-2006, 09:58 AM

Quote:

Originally Posted by Trey`

Awesome truck, also saw it on SSM. Budnik, Colorado Customs, and B.A.D (Billet Accesories Direct) are the only places I know of that build a rim over 10 inches wide. I had mine built by B.A.D they are 20x13 for my '00 GMC. They were the most reasonable and I liked their wheel design ( Maulers). They did not make the Mickey Thompson tires when I got mine built or I would have gone wider. Maybe on the next project, if I ever finish the ones I have. Love to see some more pics, keep up the good work.

actually weld just came out with some also, i just need to get a price and see if they are more resonable

SCOTI · 12-30-2006, 12:42 PM

What did you coat/paint the motor with?

yourgrool · 12-30-2006, 11:11 PM

What are the specs on the motor? valve sizes, comp. ratio, what cam, and what heads you have. thanks

layedoutnoma · 01-30-2007, 06:30 PM

and finally its done.. check it out

http://www.youtube.com/watch?v=xW1Ee0s7WVE

jbon64 · 01-30-2007, 06:37 PM

eh.....all i get is the you tube sign up page.....i wanna see it !!!!

layedoutnoma · 01-30-2007, 06:41 PM

fixed the link above..

corn · 01-30-2007, 07:38 PM

Again, all I can say is WOW!

SCOTI · 01-30-2007, 08:00 PM

Cool!

mnunn454 · 01-30-2007, 08:30 PM

Great. Excellent. Supurb.

Loved the engine movie and the rear bag/9" steup. Good luck with the rest of the project.

Can't wait for more updates!! Thanks for sharing what you've done. It inspires us all.

*Shane* · 01-30-2007, 09:03 PM

I just pi$$ed my pants in excitement. Thank you.

racerman85 · 01-30-2007, 09:36 PM

all i can say is WOW. that video with the 383 almost reminds me of a sprint car motor... im jeous of your rides!!!

Premium72 · 01-30-2007, 10:26 PM

Quote:

Originally Posted by layedoutnoma

Well got a few more updated pictures now and just time to put it on the engine stand and break it in and get it all tuned perfectly... enjoy th pics

wow that last pic makes mah testies hurt just a lil bit...AWESOME!!

Spray-Bomb · 01-30-2007, 11:21 PM

Um Um WOW

12-09-2006, 01:25 PM	#101
layedoutnoma Registered User Join Date: Mar 2006 Location: Milford, MI Posts: 148	Re: Project Thread:Nothin Normal Well to update you haven't had much done on the truck but the motor is almost done. Need wheels bad, very bad so i can finish the 9" rear and then finish the bed. But heres some pics of the motor.. still needs to be finished and painted. some pics... Attached Images __________________ Meticulous Fabrications Milford Michigan Last edited by layedoutnoma; 12-09-2006 at 01:27 PM.

12-09-2006, 03:16 PM	#102
masterbeavis Having issues Join Date: Jul 2005 Location: Eldorado Ca, an hour east of sacramento Posts: 696	Re: Project Thread:Nothin Normal Do you plan on running a scatter shield, and blanket? I Wouldn't want to read the "my clutch cut my feet off" thread. And where does the parachute go?? Looks like you are gunna have a sweet ride once you are finished giving up your first born for it.

12-23-2006, 11:53 AM	#104
layedoutnoma Registered User Join Date: Mar 2006 Location: Milford, MI Posts: 148	Re: Project Thread:Nothin Normal Well got a few more updated pictures now and just time to put it on the engine stand and break it in and get it all tuned perfectly... enjoy th pics Attached Images __________________ Meticulous Fabrications Milford Michigan

12-23-2006, 12:14 PM	#105
pcmcobra Registered User Join Date: Aug 2006 Location: Florida Posts: 1,684	Re: Project Thread:Nothin Normal *****in! Good luck dude, can't wait to see the finished product, gonna be sick.

12-23-2006, 12:57 PM	#106
68GMC454 THE VILLIAGE IDIOT Join Date: Nov 2006 Location: Tooele, Utah Posts: 1,405	Re: Project Thread:Nothin Normal looks great...back on the frame pics i just noticed the 3 or 4 inch pipe running along side of the frame...are they there for structural suport,, or what..anyway keep up the great work..someday i figure i will see your stufff on the show circut..now mine will be there to,,but parked way out in the back forty,,but hey,,i got to get to the show some how..lol __________________ honestly honey,,i have no idea how that truck got here.

12-23-2006, 05:08 PM	#107
pimperout Registered User Join Date: Sep 2006 Location: Bow Island, AB, Canada Posts: 166	Re: Project Thread:Nothin Normal i dont... dont know what to say its so so beutifull thats what i want for christmas

12-23-2006, 06:23 PM	#108
Trey` Active Member Join Date: Oct 2004 Location: Cooks Point,Texas Posts: 238	Re: Project Thread:Nothin Normal Awesome truck, also saw it on SSM. Budnik, Colorado Customs, and B.A.D (Billet Accesories Direct) are the only places I know of that build a rim over 10 inches wide. I had mine built by B.A.D they are 20x13 for my '00 GMC. They were the most reasonable and I liked their wheel design ( Maulers). They did not make the Mickey Thompson tires when I got mine built or I would have gone wider. Maybe on the next project, if I ever finish the ones I have. Love to see some more pics, keep up the good work.

12-23-2006, 09:05 PM	#109
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Project Thread:Nothin Normal how mush boost youre going to run ? i was thinking on putting a 383 with vortec in my truck in the far future (thats after i make it big and win the lotery jackpot) __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts Last edited by watahyahknow; 12-23-2006 at 09:07 PM.

12-23-2006, 11:32 PM	#110
pat Senior Member Join Date: Jul 2002 Location: Lindsay, TX Posts: 1,245	Re: Project Thread:Nothin Normal OMG... I think this is my favorite truck on the whole board right now. Thats awesome __________________ 68 Chevy 383/350 w/shift kit, 380hp/425ft-lbs, 4.5/5 drop, 17" TT2s 64 Cadillac Sedan DeVille

12-23-2006, 11:54 PM	#111
phipp13 THE DAMN YANKEE Join Date: Sep 2006 Location: Southern MD Posts: 551	Re: Project Thread:Nothin Normal With A Bbc ,lenco,and A Chute Your A Pro Mod! Please Post More Pics Along The Way. Gents That Is True Love. Merry Christmas To All !

12-30-2006, 12:42 PM	#114
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,922	Re: Project Thread:Nothin Normal What did you coat/paint the motor with? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

12-30-2006, 11:11 PM	#115
yourgrool 67-72 Join Date: Nov 2005 Location: Milwaukee Wisconsin Posts: 83	Re: Project Thread:Nothin Normal What are the specs on the motor? valve sizes, comp. ratio, what cam, and what heads you have. thanks

01-30-2007, 06:30 PM	#116
layedoutnoma Registered User Join Date: Mar 2006 Location: Milford, MI Posts: 148	Re: Project Thread:Nothin Normal and finally its done.. check it out http://www.youtube.com/watch?v=xW1Ee0s7WVE __________________ Meticulous Fabrications Milford Michigan Last edited by layedoutnoma; 01-30-2007 at 06:40 PM.

01-30-2007, 06:37 PM	#117
jbon64 Registered User Join Date: Jan 2006 Location: sidney , illinois Posts: 312	Re: Project Thread:Nothin Normal eh.....all i get is the you tube sign up page.....i wanna see it !!!! __________________ hey.....smell my finger 64 nova wagon , 63 nova convertible

01-30-2007, 06:41 PM	#118
layedoutnoma Registered User Join Date: Mar 2006 Location: Milford, MI Posts: 148	Re: Project Thread:Nothin Normal fixed the link above.. __________________ Meticulous Fabrications Milford Michigan



Register or Log In To remove these advertisements.

01-30-2007, 07:38 PM	#119
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Project Thread:Nothin Normal Again, all I can say is WOW!

01-30-2007, 08:00 PM	#120
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,922	Re: Project Thread:Nothin Normal Cool! __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

01-30-2007, 08:30 PM	#121
mnunn454 Registered User Join Date: Dec 2006 Location: Rhode Island Posts: 602	Re: Project Thread:Nothin Normal Great. Excellent. Supurb. Loved the engine movie and the rear bag/9" steup. Good luck with the rest of the project. Can't wait for more updates!! Thanks for sharing what you've done. It inspires us all. __________________ 69 C-10 SWB Fleetside 454/TH400 (For Sale) http://67-72chevytrucks.com/vboard/c...ct=1299&cat=12 70 El Camino 454 TH700 29 Model A 4-DR Sedan Deluxe

01-30-2007, 09:03 PM	#122
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Project Thread:Nothin Normal I just pi$$ed my pants in excitement. Thank you. Last edited by Shane; 01-30-2007 at 09:03 PM.

01-30-2007, 09:36 PM	#123
racerman85 Registered User Join Date: Nov 2006 Location: Windsor, PA Posts: 318	Re: Project Thread:Nothin Normal all i can say is WOW. that video with the 383 almost reminds me of a sprint car motor... im jeous of your rides!!!

01-30-2007, 11:21 PM	#125
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Project Thread:Nothin Normal Um Um WOW __________________ Just not low enough... ----------------------------- Sinister Killer

Register or Log In To remove these advertisements.