cab patches f/s - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 07-24-2007, 11:27 PM

TYZ 67 · 07-27-2007, 03:23 AM

You still have any patches left. I need the front passenger roof corner and upper rain gutter portion. Pretty much a 1/4 of the roof on the passenger side. Is there any rust on the roof of that cab or the other ones you have. Thanks! -Tyler-

billsbowtie · 07-27-2007, 01:19 PM

tyz67 that is rusty on the cab i am cutting up now . i will check others when they can home.

TYZ 67 · 07-27-2007, 01:35 PM

Just let me know I need a patch bad. About how much would you want for that section (passenger side outer roof). Live in California 93312.

67Fleet · 07-27-2007, 01:41 PM

Quote:

Originally Posted by 1969k10stepside

This is just a rough estimate of how much of the floor I need,I dont know how much I need on the passenger side.I will look when Im in the shop tomorrow.Towards the front it probably needs cut where the pan starts to slope up.
Attachment 278518

sweet, that truck is layin' body! hehehe

LooseCannon · 07-28-2007, 10:04 PM

Bill, do you have a complete passenger B-pillar?

Cochise · 07-29-2007, 12:21 AM

Quote:

Originally Posted by billsbowtie

anyone else need a patch?

I would like to see how much it would cost for this piece, wrapped around to the backside of a '70 cab. Mine had some terrible body work done to it and I'd like a good piece to work with when MY guy does it this time.

If you NEED measurements I can give them to you tomorrow afternoon.. I am mostly worried about getting what is highlighted, plus some in the back and sides around where the stock spot welds are, not worried about the latch assemblies or anything.

Zip Code is 72758

Cochise · 07-29-2007, 01:48 PM

bumpity bump bump

TYZ 67 · 07-29-2007, 05:47 PM

I believe the dark grey cab in the pics on this post (with the red cab in background) is the cab you are cutting patches out of. If not correct me. The portion I need looks good in the photo. Please let me know how much.

billsbowtie · 07-29-2007, 08:39 PM

loosecannon could you get me a pic. ?
cochise give me some measurements i think i can help you for $20.00 for the patch and $12.00 to $15.00 for shipping .
tyler i am trying to post a pic. of that area for you.

billsbowtie · 07-29-2007, 09:03 PM

HERE YOU GO TYLER.

Cochise · 07-29-2007, 09:07 PM

Quote:

Originally Posted by billsbowtie

cochise give me some measurements i think i can help you for $20.00 for the patch and $12.00 to $15.00 for shipping.

Sounds good, I'll get measurements. What is the best way? This is my first time to get measurements, although, I'm sure my body guy could help me out.

billsbowtie · 07-29-2007, 09:12 PM

just measure from body seems/lines like inches above or below . and how far around back of cab to go . maybe draw it out again on the pic. like you did before.

Cochise · 07-29-2007, 10:08 PM

Quote:

Originally Posted by billsbowtie

just measure from body seems/lines like inches above or below . and how far around back of cab to go . maybe draw it out again on the pic. like you did before.

Ok, I called my friend, whenever he gives me the measurements I'll PM you with them.

billsbowtie · 07-29-2007, 10:19 PM

sounds good

TYZ 67 · 07-30-2007, 03:04 PM

Name: Truck 065.jpg
Views: 42
Size: 42.9 KB

Bill- this is the patch I need. Dimesions- About 1'8" in from passenger side rain gutter in. About 3 inches forward from rear cab seam. Could use a couple inches of the A pillar and also need down into the upper door jam. If i need to explain more let me know. Thanks. Let me know how much.

billsbowtie · 07-30-2007, 10:53 PM

tyler that patch has been sold on this cab. i have a cab thats not home yet as soon as it gets here i will see if it's good in that spot. if so $25.00 for the patch and $15.00 for shipping.

Cochise · 07-31-2007, 06:58 AM

Bill, no call from my Body guy yet.

billsbowtie · 07-31-2007, 11:48 AM

let me know when you hear from him.

TYZ 67 · 07-31-2007, 07:41 PM

Thanks Bill. Just post when you get it. I'll keep checking back.

-Tyler-

billsbowtie · 07-31-2007, 08:11 PM

ok tyler

Cochise · 07-31-2007, 10:43 PM

Bill, here's a picture with outline of what I need.

On the back, if you could go to the first body line, I think it is about a foot in. I am not sure. Does this work for you? Sorry it isn't exactly a measurement. The line kind of covers it up, I need that top lione included that the trim covers.

billsbowtie · 08-01-2007, 12:36 PM

cochise here is your patch cut and ready to ship. i will pm payment info.

billsbowtie · 08-01-2007, 12:36 PM

TYZ 67 · 08-03-2007, 07:50 PM

Bill- If the next cab has a good roof on it I may think about buying the whole roof if that is possible. If the cab has a big window I would like to buy just below the rear window up and half way down the A pillar. Mine has the small window and I would like to convert it. Thanks -Tyler-

07-24-2007, 11:27 PM	#101
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s __________________ i have 67/72 chevy truck parts f/s.

07-27-2007, 03:23 AM	#102
TYZ 67 Registered User Join Date: Jul 2007 Location: Bakersfield Ca Posts: 49	Re: cab patches f/s You still have any patches left. I need the front passenger roof corner and upper rain gutter portion. Pretty much a 1/4 of the roof on the passenger side. Is there any rust on the roof of that cab or the other ones you have. Thanks! -Tyler-

07-27-2007, 01:19 PM	#103
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s tyz67 that is rusty on the cab i am cutting up now . i will check others when they can home. __________________ i have 67/72 chevy truck parts f/s.

07-27-2007, 01:35 PM	#104
TYZ 67 Registered User Join Date: Jul 2007 Location: Bakersfield Ca Posts: 49	Re: cab patches f/s Just let me know I need a patch bad. About how much would you want for that section (passenger side outer roof). Live in California 93312.

07-28-2007, 10:04 PM	#106
LooseCannon Registered User Join Date: Mar 2004 Location: Boiling Springs, PA Posts: 391	Re: cab patches f/s Bill, do you have a complete passenger B-pillar?

07-29-2007, 01:48 PM	#108
Cochise Junior Member Join Date: Apr 2006 Location: Rogers, AR Posts: 298	Re: cab patches f/s bumpity bump bump

07-29-2007, 05:47 PM	#109
TYZ 67 Registered User Join Date: Jul 2007 Location: Bakersfield Ca Posts: 49	Re: cab patches f/s I believe the dark grey cab in the pics on this post (with the red cab in background) is the cab you are cutting patches out of. If not correct me. The portion I need looks good in the photo. Please let me know how much.

07-29-2007, 08:39 PM	#110
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s loosecannon could you get me a pic. ? cochise give me some measurements i think i can help you for $20.00 for the patch and $12.00 to $15.00 for shipping . tyler i am trying to post a pic. of that area for you. __________________ i have 67/72 chevy truck parts f/s.

07-29-2007, 09:03 PM	#111
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s HERE YOU GO TYLER. __________________ i have 67/72 chevy truck parts f/s.

07-29-2007, 09:12 PM	#113
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s just measure from body seems/lines like inches above or below . and how far around back of cab to go . maybe draw it out again on the pic. like you did before. __________________ i have 67/72 chevy truck parts f/s. Last edited by billsbowtie; 07-29-2007 at 09:14 PM.

07-29-2007, 10:19 PM	#115
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s sounds good __________________ i have 67/72 chevy truck parts f/s.

07-30-2007, 03:04 PM	#116
TYZ 67 Registered User Join Date: Jul 2007 Location: Bakersfield Ca Posts: 49	Re: cab patches f/s Bill- this is the patch I need. Dimesions- About 1'8" in from passenger side rain gutter in. About 3 inches forward from rear cab seam. Could use a couple inches of the A pillar and also need down into the upper door jam. If i need to explain more let me know. Thanks. Let me know how much.

07-30-2007, 10:53 PM	#117
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s tyler that patch has been sold on this cab. i have a cab thats not home yet as soon as it gets here i will see if it's good in that spot. if so $25.00 for the patch and $15.00 for shipping. __________________ i have 67/72 chevy truck parts f/s.

07-31-2007, 06:58 AM	#118
Cochise Junior Member Join Date: Apr 2006 Location: Rogers, AR Posts: 298	Re: cab patches f/s Bill, no call from my Body guy yet.

07-31-2007, 11:48 AM	#119
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s let me know when you hear from him. __________________ i have 67/72 chevy truck parts f/s.



Register or Log In To remove these advertisements.

07-31-2007, 07:41 PM	#120
TYZ 67 Registered User Join Date: Jul 2007 Location: Bakersfield Ca Posts: 49	Re: cab patches f/s Thanks Bill. Just post when you get it. I'll keep checking back. -Tyler-

07-31-2007, 08:11 PM	#121
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s ok tyler __________________ i have 67/72 chevy truck parts f/s.

07-31-2007, 10:43 PM	#122
Cochise Junior Member Join Date: Apr 2006 Location: Rogers, AR Posts: 298	Re: cab patches f/s Bill, here's a picture with outline of what I need. On the back, if you could go to the first body line, I think it is about a foot in. I am not sure. Does this work for you? Sorry it isn't exactly a measurement. The line kind of covers it up, I need that top lione included that the trim covers. Last edited by Cochise; 07-31-2007 at 10:44 PM.

08-01-2007, 12:36 PM	#123
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s cochise here is your patch cut and ready to ship. i will pm payment info. __________________ i have 67/72 chevy truck parts f/s.

08-01-2007, 12:36 PM	#124
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s __________________ i have 67/72 chevy truck parts f/s.

08-03-2007, 07:50 PM	#125
TYZ 67 Registered User Join Date: Jul 2007 Location: Bakersfield Ca Posts: 49	Re: cab patches f/s Bill- If the next cab has a good roof on it I may think about buying the whole roof if that is possible. If the cab has a big window I would like to buy just below the rear window up and half way down the A pillar. Mine has the small window and I would like to convert it. Thanks -Tyler-

Register or Log In To remove these advertisements.