1969 GMC Short Fleet Build - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*highperf4x4* · 04-13-2010, 01:55 AM

Sweet!

djmachinist · 04-13-2010, 10:52 AM

Quote:

Originally Posted by VA72C10

You can get a nice aluminum radiator made to fit our trucks on ebay for around 300-400 and fans for 100-200 plus a controller for another 100. So for 500-700 you can get that setup....2K would be for name brand griffen or be-cool rad and fans but there are some cheap alternatives that board members have used and been happy with.

Thanks for the info, I called "Be-Cool" tech line, and I told them what I had. They gave me the following part numbers for a direct-fit alum radiator/with twin 11" fans/controller & hardware kit: No. 82058. also part No. 75095-air cond. relay kit. Be-Cool says this set-up is good up to 500HP engines. Summit racing had everything in stock, I should have it by thursday. Another issue put to rest!!

Cost= $1400.00

Dale

72BlckButy · 04-13-2010, 02:16 PM

Dale, that thing looks good on all 4's. Money well spent.

BB72CHEVKT · 04-13-2010, 04:09 PM

Looks great. If I were you I might have to talk to the guy leaning against the truck though...

djmachinist · 04-14-2010, 06:54 PM

Bumbera's has finished most of the engine plumbing and throttle/trans kick down cables. The air Cleaner looks good.........

*highperf4x4* · 04-14-2010, 09:48 PM

That's gonna be too slick to drive!!!

djmachinist · 04-14-2010, 11:47 PM

Quote:

Originally Posted by highperf4x4

That's gonna be too slick to drive!!!

Nah, Its going to be a daily driver, thats why I did not chrome out the engine.

Dale

djmachinist · 04-15-2010, 07:01 AM

I checked the rear shock angle on the rear end, bounced the rear up and down, the shocks are not doing much dampening at the 35 deg. angle they are at now since I lowered the truck

I guess I will order the shock relocator brackets from early and stand the shocks up more vertical. Also the Steering Column bearings are shot, real sloppy

......Oh well, its only money...Ouch!!!!!..............but I'm having a good time

Dale

*highperf4x4* · 04-15-2010, 09:04 AM

72BlckButy · 04-15-2010, 12:59 PM

Quote:

Originally Posted by djmachinist

Oh well, its only money...Ouch!!!!!..............but I'm having a good time

Dale

That's something I learned all to long ago... you only live once right?

I hope because I've been spending my retirement fund like its going out of style, and I have 20+ years before I can retire.

Cole Trickle · 04-15-2010, 02:22 PM

Neat build.....

She will be a great looking truck with all the modern bells and whistles when your done

big mike71 · 04-15-2010, 06:31 PM

Quote:

Originally Posted by 72BlckButy

That's something I learned all to long ago... you only live once right?

I hope because I've been spending my retirement fund like its going out of style, and I have 20+ years before I can retire.

I won't be able to retire until they close the lid on my casket.

big mike71 · 04-15-2010, 06:38 PM

Quote:

Originally Posted by djmachinist

The Bumbera guys talked to me about the radiator and fan issue now that the engine and trans is installed. since I am also installing a Vintage Air System, they suggest a custom aluminum radiator with twin electric fans. The catch is it cost about two grand.....ouch!!!!! Any body have a alternative solution?

Thanks,
Dale

I have Vintage Air and a factory radiator with no overheating issues. How tall are your new tires?

djmachinist · 04-15-2010, 07:53 PM

Quote:

Originally Posted by big mike71

I have Vintage Air and a factory radiator with no overheating issues. How tall are your new tires?

Mike,

28" dia. rear tires, 3.73 rear end.

Dale

djmachinist · 04-16-2010, 12:21 AM

Quote:

Originally Posted by big mike71

I have Vintage Air and a factory radiator with no overheating issues. How tall are your new tires?

Mike,
Another thought on why you are doing fine on your stock radiator set-up compared to my radiator needs here in houston.......I know it gets hot in the summer in Missouri however in Houston the average summer day is in the mid to upper 90's with 90 percent humidity. Heat transfer devices do not work very efficent in these conditions. What I bought may seem like a little overkill, but better safe than sorry.

I grew up in the Dallas/Fort Worth area in North Texas. It gets darn hot there too, but the Humidity is on average about 40 percent. I have lived in Houston for twenty five years and have never got used to the summer weather down here!!!

Oh....Nate, Retirement, Whats that?!!!

Dale

djmachinist · 04-16-2010, 12:44 PM

Radiator install pics, Bumbera's did a great job installing the engine/trans/radiator components, the attention to detail is amazing with all the custom fabricated little brackets for the wiring and hoses!!! The radiator overflow catch tank came out nice!!!!

Dale

djmachinist · 04-16-2010, 12:47 PM

The new driveshaft arrived while I was there......Sweet!.....

Dale

VA72C10 · 04-16-2010, 02:58 PM

cool! Looking good and coming right along. You'll be enjoying it in no time!

big mike71 · 04-16-2010, 09:50 PM

Quote:

Originally Posted by djmachinist

Mike,

28" dia. rear tires, 3.73 rear end.

Dale

Thanks, I measured my truck, but not the tires. It is not lowered and it measured alittle over 31" in the front and alittle under 32" in the back.

big mike71 · 04-16-2010, 09:51 PM

Quote:

Originally Posted by djmachinist

Radiator install pics, Bumbera's did a great job installing the engine/trans/radiator components, the attention to detail is amazing with all the custom fabricated little brackets for the wiring and hoses!!! The radiator overflow catch tank came out nice!!!!

Dale

Very nice setup.

djmachinist · 04-16-2010, 10:28 PM

Quote:

Originally Posted by big mike71

Thanks, I measured my truck, but not the tires. It is not lowered and it measured alittle over 31" in the front and alittle under 32" in the back.

Mike,
My truck is lowered 2.5 in. in the front and 3 in. in the rear, measured from the top of the wheelwheels-31 in. in the rear & 30" in the front. I really do not want to lower it anymore.
Looks like your truck is just a bit higher than mine.

Dale

*highperf4x4* · 04-17-2010, 03:27 AM

Man you sneak alot of stuff in here while I'm not watching!!!

Looking sharp though!

big mike71 · 04-17-2010, 07:47 PM

Quote:

Originally Posted by djmachinist

Ok, I ordered Falken Ziex S/TZ-01 size P275/50R-17 for the rear and
P255/50R-17 for the front. I think this may work. Thanks for the Heads-up.

Dale

If I have a 9" wide rear wheel what size tire would about the same height as a 275/50 -17. Thanks

djmachinist · 04-18-2010, 06:52 AM

Quote:

Originally Posted by big mike71

If I have a 9" wide rear wheel what size tire would about the same height as a 275/50 -17. Thanks

Mike,

What dia of wheel are you using?

big mike71 · 04-18-2010, 06:12 PM

17"

04-13-2010, 01:55 AM	#101
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: 1969 GMC Short Fleet Build Sweet!

04-13-2010, 02:16 PM	#103
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 1969 GMC Short Fleet Build Dale, that thing looks good on all 4's. Money well spent. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

04-13-2010, 04:09 PM	#104
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,948	Re: 1969 GMC Short Fleet Build Looks great. If I were you I might have to talk to the guy leaning against the truck though... __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

04-14-2010, 06:54 PM	#105
djmachinist Registered User Join Date: Feb 2010 Location: Katy, Texas Posts: 253	Re: 1969 GMC Short Fleet Build Bumbera's has finished most of the engine plumbing and throttle/trans kick down cables. The air Cleaner looks good......... Attached Images __________________ 1969 GMC SWB FLEETSIDE ZZ 383 CRATE MOTOR,700R4,& 3.73 POSI & VINTAGE AIR DALE JONES MY BUILD THREAD: "69 GMC SHORT FLEET" http://67-72chevytrucks.com/vboard/s...d.php?t=388447

04-14-2010, 09:48 PM	#106
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: 1969 GMC Short Fleet Build That's gonna be too slick to drive!!!

04-15-2010, 07:01 AM	#108
djmachinist Registered User Join Date: Feb 2010 Location: Katy, Texas Posts: 253	Re: 1969 GMC Short Fleet Build I checked the rear shock angle on the rear end, bounced the rear up and down, the shocks are not doing much dampening at the 35 deg. angle they are at now since I lowered the truck I guess I will order the shock relocator brackets from early and stand the shocks up more vertical. Also the Steering Column bearings are shot, real sloppy......Oh well, its only money...Ouch!!!!!..............but I'm having a good time Dale __________________ 1969 GMC SWB FLEETSIDE ZZ 383 CRATE MOTOR,700R4,& 3.73 POSI & VINTAGE AIR DALE JONES MY BUILD THREAD: "69 GMC SHORT FLEET" http://67-72chevytrucks.com/vboard/s...d.php?t=388447 Last edited by djmachinist; 04-15-2010 at 07:02 AM.

04-15-2010, 09:04 AM	#109
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: 1969 GMC Short Fleet Build

04-15-2010, 02:22 PM	#111
Cole Trickle C-10 Club Member Join Date: Mar 2010 Location: Corona,CA Posts: 1,001	Re: 1969 GMC Short Fleet Build Neat build..... She will be a great looking truck with all the modern bells and whistles when your done

04-16-2010, 12:44 PM	#116
djmachinist Registered User Join Date: Feb 2010 Location: Katy, Texas Posts: 253	Re: 1969 GMC Short Fleet Build Radiator install pics, Bumbera's did a great job installing the engine/trans/radiator components, the attention to detail is amazing with all the custom fabricated little brackets for the wiring and hoses!!! The radiator overflow catch tank came out nice!!!! Dale Attached Images __________________ 1969 GMC SWB FLEETSIDE ZZ 383 CRATE MOTOR,700R4,& 3.73 POSI & VINTAGE AIR DALE JONES MY BUILD THREAD: "69 GMC SHORT FLEET" http://67-72chevytrucks.com/vboard/s...d.php?t=388447

04-16-2010, 12:47 PM	#117
djmachinist Registered User Join Date: Feb 2010 Location: Katy, Texas Posts: 253	Re: 1969 GMC Short Fleet Build The new driveshaft arrived while I was there......Sweet!..... Dale Attached Images __________________ 1969 GMC SWB FLEETSIDE ZZ 383 CRATE MOTOR,700R4,& 3.73 POSI & VINTAGE AIR DALE JONES MY BUILD THREAD: "69 GMC SHORT FLEET" http://67-72chevytrucks.com/vboard/s...d.php?t=388447

04-16-2010, 02:58 PM	#118
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 1969 GMC Short Fleet Build cool! Looking good and coming right along. You'll be enjoying it in no time! __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-17-2010, 03:27 AM	#122
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: 1969 GMC Short Fleet Build Man you sneak alot of stuff in here while I'm not watching!!! Looking sharp though!

04-18-2010, 06:12 PM	#125
big mike71 Registered User Join Date: Mar 2009 Location: independence mo Posts: 2,111	Re: 1969 GMC Short Fleet Build 17" __________________ I'm not as good as I once was, But I'm as good once as I ever was.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.