IN Misc. 72 Chevy C20 Parts, Cargo light, AM Radio, Custom Camper Emblems, More - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Todd68Chevy** · 10-02-2010, 08:58 PM

Quote:

Originally Posted by Heavy Evy

yes that is the part i need and mine doesn't have a/c. i just need the engine side heater core cover not the whole heater box
Posted via Mobile Device

More pictures for HEAVY EVY..... Box looks good but the seal on the door inside is poor, door moves ok-- need more pictures let me know, Thanks, Todd

GobbleStalker · 10-02-2010, 09:16 PM

I am looking for a good straight tailgate with the stamped chevy in th back. I also need a complete tailgate trim uppers and lower.

**Todd68Chevy** · 10-02-2010, 09:25 PM

Quote:

Originally Posted by gsxrdoug

How is the front window trim and rear cab paint divider? Interested. Thanks Doug

Doug, I will check out the windshield trim tomorrow but I think it is ok. I tried to take pictures of the paint devider trim. It is in good shape for its age. I did not see any dents/ dings. I would take $20.00 plus shipping for the devider trim. I will let you know about the windshield trim tomorrow. Thanks, Todd

**Todd68Chevy** · 10-02-2010, 09:27 PM

Quote:

Originally Posted by GobbleStalker

I am looking for a good straight tailgate with the stamped chevy in th back. I also need a complete tailgate trim uppers and lower.

Sorry but I know I do not have a good tailgate. I might have some trim but I am not sure if it is good or not. I will check tomorrow and let you know. Thanks, Todd

GobbleStalker · 10-02-2010, 10:05 PM

Quote:

Originally Posted by Todd68Chevy

Sorry but I know I do not have a good tailgate. I might have some trim but I am not sure if it is good or not. I will check tomorrow and let you know. Thanks, Todd

Thanks thats all I can ask. Much appreciated.

Kev

Heavy Evy · 10-02-2010, 10:46 PM

Todd is that the one from the 69 or the one with the hole you told me about earlier?

**Todd68Chevy** · 10-03-2010, 08:38 AM

Quote:

Originally Posted by Heavy Evy

Todd is that the one from the 69 or the one with the hole you told me about earlier?

Sorry I did not say, the pictures I have posted are all of the one off of the 69. I got it removed yesterday. This one looks real good as far as the box is but the rubber seal on the door inside is not all there. I do have the heater core brackets and all the screws that I removed that I will include. I have the blower motor and heater core also but condition is unknown. I would include them if you want but they will add to the shipping cost because of the weight. I have not posted any pictures of the damaged one I talked about. Do you want pictures of the damaged one? Thanks, Todd

**Todd68Chevy** · 10-03-2010, 09:53 PM

Quote:

Originally Posted by GobbleStalker

I am looking for a good straight tailgate with the stamped chevy in th back. I also need a complete tailgate trim uppers and lower.

Sorry but the tailgate trim I have is not worth the shipping price. Sorry I could not help, Thanks for asking, Todd

Quote:

Originally Posted by gsxrdoug

How is the front window trim and rear cab paint divider? Interested. Thanks Doug

The windshield trim on this trim is pretty good but I did see a couple small dings along the top on the drivers side. It could use a good clean and polish I am sure. I tried to get a picture but it did not come out good. I would take $25.00 plus shipping. I do have a 69 that I am going to be parting out that looks good and I did not see any dents in it.

Heavy Evy · 10-03-2010, 09:57 PM

Quote:

Originally Posted by Todd68Chevy

Sorry I did not say, the pictures I have posted are all of the one off of the 69. I got it removed yesterday. This one looks real good as far as the box is but the rubber seal on the door inside is not all there. I do have the heater core brackets and all the screws that I removed that I will include. I have the blower motor and heater core also but condition is unknown. I would include them if you want but they will add to the shipping cost because of the weight. I have not posted any pictures of the damaged one I talked about. Do you want pictures of the damaged one? Thanks, Todd

Ok awsome. I'm glad you got the screws and brackets I need them too since mine is sort of missing haha

gcburdic · 10-04-2010, 01:23 PM

Todd....I hope you don't mind me saying this.....BUT

JMHO, make sure to get insurance on that trim....Todd does an EXCELLENT job packaging, but the USPS does an even better job trying to damage it!!!

TTT for ya Todd....glad things are selling for ya!!!

**Todd68Chevy** · 10-04-2010, 09:16 PM

Quote:

Originally Posted by Heavy Evy

Ok awsome. I'm glad you got the screws and brackets I need them too since mine is sort of missing haha

If you want me to figure shipping I need to know a shipping zip code and I need to know if you want the blower and the heater core also. Let me know, Thanks, Todd

Quote:

Originally Posted by gcburdic

Todd....I hope you don't mind me saying this.....BUT

JMHO, make sure to get insurance on that trim....Todd does an EXCELLENT job packaging, but the USPS does an even better job trying to damage it!!!

TTT for ya Todd....glad things are selling for ya!!!

Good to hear from you gcburdic, I will not ship trim without insurance but I forgot to say, so thanks for bringing it up. Hope all is well. Todd

Quote:

Originally Posted by gsxrdoug

How is the front window trim and rear cab paint divider? Interested. Thanks Doug

I got the windshield molding off tonight and will work on box to ship the long trim in. Here are a few more pictures. The last 2 pictures I was trying to show the 3 little dents in the top part I talked about. Thanks, Todd

**Todd68Chevy** · 10-22-2010, 07:49 PM

Forgot to state that the windshield trim and paint divider trim are sold.

Pictures for ProjectJimmie

mikewarme · 11-30-2010, 01:45 AM

Hi Todd,

Custom Camper emblems? Sorry if i missed them in thread. Also kickdown switch/bracket?

Mikewarme

ralphie628 · 11-30-2010, 06:30 AM

Are the door latch regulators any good? thanks

**Todd68Chevy** · 11-30-2010, 07:24 AM

Quote:

Originally Posted by mikewarme

Hi Todd,

Custom Camper emblems? Sorry if i missed them in thread. Also kickdown switch/bracket?

Mikewarme

Sorry but both items are already sold. I do have a pair of Custom Camper 20 emblems on a 69 that I am parting out. They are on the fender instead of the doors. Thanks for your interest.

Todd

**Todd68Chevy** · 11-30-2010, 07:26 AM

Quote:

Originally Posted by ralphie628

Are the door latch regulators any good? thanks

Ralphie628, are you talking about the latch part that is in the door? I will need to check condition and get back to you.

Thanks, Todd

ralphie628 · 11-30-2010, 07:40 AM

Quote:

Originally Posted by Todd68Chevy

Ralphie628, are you talking about the latch part that is in the door? I will need to check condition and get back to you.

Thanks, Todd

Well just need drivers side. its the small latch that the door handle attatches to on the in side of the door. On the picture its on the left side.

also any good throttle cable and or bracket that holds the cable in place that bolts on to the intake manifold? thanks

**Todd68Chevy** · 11-30-2010, 07:44 AM

Quote:

Originally Posted by ralphie628

Well just need drivers side. its the small latch that the door handle attatches to on the in side of the door. On the picture its on the left side.

also any good throttle cable and or bracket that holds the cable in place that bolts on to the intake manifold? thanks

Ok, I was not thinking about that part. Thanks for the picture so I know we are talking about the same part. I have 2 72 trucks so I will try to get them check tonight after work. Thanks

projectjimmie68 · 11-30-2010, 03:24 PM

Do you have any transmission lines? Thanks Projectjimmie

spectra170 · 11-30-2010, 08:57 PM

How is the rear end on the 3/4 ton should be an ho52? What gears, and would you sell just the center section?
Thanks

**Todd68Chevy** · 12-01-2010, 07:56 AM

Quote:

Originally Posted by ralphie628

Are the door latch regulators any good? thanks

Ralphie, I did not get them check last night. I got home late and the weather was crap. I will get them checked as soon as I can. Thanks, Todd

Quote:

Originally Posted by projectjimmie68

Do you have any transmission lines? Thanks Projectjimmie

Sorry but I still do not have any good transmission lines. I will keep you in mind if I find any. Thanks, Todd

Quote:

Originally Posted by spectra170

How is the rear end on the 3/4 ton should be an ho52? What gears, and would you sell just the center section?
Thanks

This truck has a 14 bolt rear end. I do have 2 other 3/4 tons that do have the Eaton rear ends. One is a 4.10 ratio No-Spin locker in a 1969. The other one is an open rear end that I have not found out the ratio yet that is in a 1967 chassis. I do have another guy interested locally. I will let you know more as soon as I can get the gear ratio checked in the 67. I have shipped one of these complete hoghead sections before and it cost $125.00 for shipping alone to Virginia. I will let you know as soon as I can. Thanks, Todd

**Todd68Chevy** · 12-01-2010, 09:41 PM

Quote:

Originally Posted by ralphie628

Well just need drivers side. its the small latch that the door handle attatches to on the in side of the door. On the picture its on the left side.

also any good throttle cable and or bracket that holds the cable in place that bolts on to the intake manifold? thanks

I got the regulator removed and it looks ok and moves freely. I think it supposed to have a coiled spring to hold the handle down and if so that spring is broken. I would take $8.00 shipped USPS First Class or $11.00 shipped USPS Priority Mail.

I do not have any throttle cables or brackets at this time. All the truck I have were bought with out engines.

Thanks, Todd

projectjimmie68 · 12-11-2010, 10:28 AM

I am in need of a pair of sun visor arms. Do you have,if so how much shipped to zip 32136? Thanks Projectjimmie

**Todd68Chevy** · 12-11-2010, 10:36 AM

Quote:

Originally Posted by projectjimmie68

I am in need of a pair of sun visor arms. Do you have,if so how much shipped to zip 32136? Thanks Projectjimmie

ProjectJimmie Are you meaning the part that mounts to the roof and actually has the sunvisor on it or the clip that is in the middle of the cab and hold up the sunvisor end. I should have either one. Is there a color that you are looking for? Thanks, Todd

projectjimmie68 · 12-11-2010, 01:39 PM

Iam looking for just the part that bolts to the roof(3 screws) or a complete bad pair of visors. No special color. All I need is the metal rod part that runs through the visor. Thanks

10-02-2010, 09:16 PM	#102
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: Misc. 72 Chevy C20 Parts, Cargo light, AM Radio, Custom Camper Emblems, More I am looking for a good straight tailgate with the stamped chevy in th back. I also need a complete tailgate trim uppers and lower. __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride )

10-02-2010, 10:46 PM	#106
Heavy Evy born to lose Join Date: Sep 2008 Location: Salt Lake City, Utah Posts: 842	Re: Misc. 72 Chevy C20 Parts, Cargo light, AM Radio, Custom Camper Emblems, More Todd is that the one from the 69 or the one with the hole you told me about earlier? __________________ _____________________ '67 Chevy Belair Wagon 283 Powerglide '68 Chevy II Nova 2 door 350 TH400 Sold!! '71 Chevy C20 350 TH350 '71 Chevy C10 Burb 350 TH350 stolen totalled gone.... Burb Build http://67-72chevytrucks.com/vboard/s...d.php?t=475155 Nova Build http://67-72chevytrucks.com/vboard/s...d.php?t=498979 Wagon Build http://67-72chevytrucks.com/vboard/s...d.php?t=543052 Not giving a truck.

10-04-2010, 01:23 PM	#110
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Misc. 72 Chevy C20 Parts, Cargo light, AM Radio, Custom Camper Emblems, More Todd....I hope you don't mind me saying this.....BUT JMHO, make sure to get insurance on that trim....Todd does an EXCELLENT job packaging, but the USPS does an even better job trying to damage it!!! TTT for ya Todd....glad things are selling for ya!!! __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

10-22-2010, 07:49 PM	#112
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: Misc. 72 Chevy C20 Parts, Cargo light, AM Radio, Custom Camper Emblems, More Forgot to state that the windshield trim and paint divider trim are sold. Pictures for ProjectJimmie Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

11-30-2010, 01:45 AM	#113
mikewarme Registered User Join Date: Oct 2009 Location: Burbank,California Posts: 285	Re: Misc. 72 Chevy C20 Parts, Cargo light, AM Radio, Custom Camper Emblems, More Hi Todd, Custom Camper emblems? Sorry if i missed them in thread. Also kickdown switch/bracket? Mikewarme

11-30-2010, 06:30 AM	#114
ralphie628 Registered User Join Date: Dec 2009 Location: Chatsworth CA Posts: 243	Re: Misc. 72 Chevy C20 Parts, Cargo light, AM Radio, Custom Camper Emblems, More Are the door latch regulators any good? thanks

11-30-2010, 03:24 PM	#119
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: Misc. 72 Chevy C20 Parts, Cargo light, AM Radio, Custom Camper Emblems, More Do you have any transmission lines? Thanks Projectjimmie

11-30-2010, 08:57 PM	#120
spectra170 Registered User Join Date: Nov 2010 Location: Wilton NC Posts: 1	Re: Misc. 72 Chevy C20 Parts, Cargo light, AM Radio, Custom Camper Emblems, More How is the rear end on the 3/4 ton should be an ho52? What gears, and would you sell just the center section? Thanks

12-11-2010, 10:28 AM	#123
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: Misc. 72 Chevy C20 Parts, Cargo light, AM Radio, Custom Camper Emblems, More I am in need of a pair of sun visor arms. Do you have,if so how much shipped to zip 32136? Thanks Projectjimmie

12-11-2010, 01:39 PM	#125
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: Misc. 72 Chevy C20 Parts, Cargo light, AM Radio, Custom Camper Emblems, More Iam looking for just the part that bolts to the roof(3 screws) or a complete bad pair of visors. No special color. All I need is the metal rod part that runs through the visor. Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.