AL Parting out '72 GMC - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

faribran · 12-01-2010, 01:54 AM

Quote:

Originally Posted by gmc1971harwich

what would be the total cost for the seat + shipping to 02645

It would $150 shipped. But it would have to go to a UPS terminal or a commercial dock.
Posted via Mobile Device

faribran · 12-01-2010, 04:39 PM

I will have some pictures of the seat loaded up tonight. Also bump.

**too much stuff** · 12-01-2010, 09:39 PM

Any updates on exhaust hangers? Eric

Mr.C · 12-02-2010, 04:09 AM

Dash pad and steering wheel still in the mix?

faribran · 12-02-2010, 09:33 AM

Quote:

Originally Posted by too much stuff

Any updates on exhaust hangers? Eric

i took some pics. just have to get them from the chip to the site...
hope to have some up later today. thanks

faribran · 12-02-2010, 09:33 AM

Quote:

Originally Posted by Mr.C

Dash pad and steering wheel still in the mix?

yes, still up for grabs.

faribran · 12-02-2010, 09:37 AM

Quote:

Originally Posted by Livrat

Paypal sent for the engine towers... Thank you!!

the weather here has been difficult.. i took the towers off last nite... should have them on the way soon.
fyi
thanks
Richard

faribran · 12-02-2010, 09:40 AM

Quote:

Originally Posted by too much stuff

Any updates on exhaust hangers? Eric

Eric,
also got the shield off last nite... will remove the glove box lid tonite.
fyi
Rlt

faribran · 12-02-2010, 10:58 AM

Quote:

Originally Posted by Mr.C

Dash pad and steering wheel still in the mix?

The dash pad and steering wheel are still in the truck. The dash isn't brittle or cracked. I will get the steering wheel pictures up soon, it has a few spots of surface rust on it, but the rubber wrapping the wheel isn't turn or hurt what so ever.

RLT

Mr.C · 12-02-2010, 11:11 AM

Could you post some pics?

faribran · 12-02-2010, 11:25 AM

Quote:

Originally Posted by Mr.C

Could you post some pics?

I will take them and post them up tonight, I apologize for it taking a few days.

Richard

Mr.C · 12-02-2010, 11:47 AM

No problem. How much for both shipped to 53073?

faribran · 12-02-2010, 12:23 PM

Quote:

Originally Posted by Mr.C

No problem. How much for both shipped to 53073?

Also what kind of pictures would you like of the dash pad? I was going back through the photos that are already posted and there are quite a few of it. But i will make sure to post one up of the steering wheel.

Mr.C · 12-02-2010, 12:31 PM

Sorry, no need to post more pics. Took a look and im good just let me know total for the pad and wheel shipped to 53073.

faribran · 12-02-2010, 03:31 PM

Pictures of the exhaust hangers under the truck and the seat as promised...again I apologize for the delay on these.

Please note the hangers are RIGHT and LEFT..

faribran · 12-02-2010, 03:32 PM

And a few more pictures

faribran · 12-02-2010, 03:37 PM

Quote:

Originally Posted by Mr.C

Sorry, no need to post more pics. Took a look and im good just let me know total for the pad and wheel shipped to 53073.

How does $55 dollars shipped sound Mr. C?

faribran · 12-03-2010, 09:21 AM

Bttt
Posted via Mobile Device

faribran · 12-03-2010, 05:50 PM

Evening bump
Posted via Mobile Device

faribran · 12-04-2010, 10:45 AM

Morning bump
Posted via Mobile Device

MotorSeven · 12-04-2010, 04:15 PM

Is the Posi stil available & how far from Chattanooga ar you?

RD

faribran · 12-04-2010, 06:25 PM

I'm checking tomorrow to make sure that it is a posi. But it's a good running driving rear end. My zip is zip code is 36345. And I'm about 6 hours from Nashville. And it is a leaf spring rear end.

faribran · 12-04-2010, 06:33 PM

I also want to add that this is a high hump cab. Cheyenne super.

faribran · 12-05-2010, 02:28 AM

Saturday night bump.
Posted via Mobile Device

Mr.C · 12-05-2010, 03:36 AM

Sorry it took so long to get back to you. I have been running ragged. My wife and her sisters went to FL for her B-day, left me home with the kids. Please PM me your PP info.
Thanks, Mike.

12-01-2010, 04:39 PM	#102
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC I will have some pictures of the seat loaded up tonight. Also bump. __________________ "

12-01-2010, 09:39 PM	#103
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,709	Re: Parting out '72 GMC Any updates on exhaust hangers? Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-02-2010, 04:09 AM	#104
Mr.C Registered User Join Date: Nov 2010 Location: Plymouth, WI Posts: 174	Re: Parting out '72 GMC Dash pad and steering wheel still in the mix? __________________ How about you go over and introduce yourself, build me up, that way I don't have to brag about myself later.

12-02-2010, 11:11 AM	#110
Mr.C Registered User Join Date: Nov 2010 Location: Plymouth, WI Posts: 174	Re: Parting out '72 GMC Could you post some pics? __________________ How about you go over and introduce yourself, build me up, that way I don't have to brag about myself later.

12-02-2010, 11:47 AM	#112
Mr.C Registered User Join Date: Nov 2010 Location: Plymouth, WI Posts: 174	Re: Parting out '72 GMC No problem. How much for both shipped to 53073? __________________ How about you go over and introduce yourself, build me up, that way I don't have to brag about myself later.

12-02-2010, 12:31 PM	#114
Mr.C Registered User Join Date: Nov 2010 Location: Plymouth, WI Posts: 174	Re: Parting out '72 GMC Sorry, no need to post more pics. Took a look and im good just let me know total for the pad and wheel shipped to 53073. __________________ How about you go over and introduce yourself, build me up, that way I don't have to brag about myself later.

12-02-2010, 03:31 PM	#115
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC Pictures of the exhaust hangers under the truck and the seat as promised...again I apologize for the delay on these. Please note the hangers are RIGHT and LEFT.. Attached Images __________________ " Last edited by faribran; 12-02-2010 at 03:41 PM. Reason: .

12-02-2010, 03:32 PM	#116
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC And a few more pictures Attached Images __________________ "

12-03-2010, 09:21 AM	#118
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC Bttt Posted via Mobile Device __________________ "

12-03-2010, 05:50 PM	#119
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC Evening bump Posted via Mobile Device __________________ "

12-04-2010, 10:45 AM	#120
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC Morning bump Posted via Mobile Device __________________ "

12-04-2010, 04:15 PM	#121
MotorSeven Restoration Desperation Join Date: Aug 2006 Location: Tennessee Posts: 373	Re: Parting out '72 GMC Is the Posi stil available & how far from Chattanooga ar you? RD

12-04-2010, 06:25 PM	#122
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC I'm checking tomorrow to make sure that it is a posi. But it's a good running driving rear end. My zip is zip code is 36345. And I'm about 6 hours from Nashville. And it is a leaf spring rear end. __________________ "

12-04-2010, 06:33 PM	#123
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC I also want to add that this is a high hump cab. Cheyenne super. __________________ "

12-05-2010, 02:28 AM	#124
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Parting out '72 GMC Saturday night bump. Posted via Mobile Device __________________ "



Register or Log In To remove these advertisements.

12-05-2010, 03:36 AM	#125
Mr.C Registered User Join Date: Nov 2010 Location: Plymouth, WI Posts: 174	Re: Parting out '72 GMC Sorry it took so long to get back to you. I have been running ragged. My wife and her sisters went to FL for her B-day, left me home with the kids. Please PM me your PP info. Thanks, Mike. __________________ How about you go over and introduce yourself, build me up, that way I don't have to brag about myself later.

Register or Log In To remove these advertisements.